hit counter script
LG FH069FD2FS Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Washer
  5. FH069FD2FS
  6. Owner's manual

LG FH069FD2FS Owner's Manual

Commercial washer
Hide thumbs Also See for FH069FD2FS:
Table of Contents

Advertisement

Quick Links

OWNER'S MANUAL
COMMERCIAL
WASHER
Before beginning installation, read these instructions carefully. This will simplify
installation and ensure that the washer is installed correctly and safely. Leave
these instructions near the washer after installation for future reference.
FH069FD2FS
FH069FD3FS
FH069FD4FS
MFL67658565
Copyright © 2018 LG Electronics Inc. All Rights Reserved
www.lg.com

Advertisement

Table of Contents
loading

Related Manuals for LG FH069FD2FS

Summary of Contents for LG FH069FD2FS

  • Page 1 Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the washer is installed correctly and safely. Leave these instructions near the washer after installation for future reference. FH069FD2FS FH069FD3FS FH069FD4FS www.lg.com MFL67658565 Copyright © 2018 LG Electronics Inc. All Rights Reserved...

  • Page 2: Product Features

    PRODUCT FEATURES PRODUCT FEATURES DIRECT DRIVE SYSTEM The advanced Brushless DC motor directly drives the drum without using a belt and pulley. TILTED DRUM AND EXTRA LARGE DOOR OPENING The tilted drum and extra large opening make it possible to load and unload clothing more easily. ULTRA CAPACITY The larger drum enables more tumbling action and greater centrifugal force, but also less tangling and wrinkling of the laundry.

  • Page 3: Important Safety Instructions

    3. You can take your appliance either to the shop where you purchased the product, or contact your local government waste office for details of your nearest authorised WEEE collection point. For the most up to date information for your country please see www.lg.com/global/recycling.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack...

  • Page 5: Grounding Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. BASIC SAFETY PRECAUTIONS WARNING To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic...
  • Page 6 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. SAFETY INSTRUCTIONS FOR INSTALLATION WARNING To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic...

  • Page 7: Safety Instructions For Use, Care, Cleaning, And Disposal

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL WARNING To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic...
  • Page 8 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL WARNING To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic...

  • Page 9: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS - 9-4. Pre-wash set up - 9-5. Twin spray set up - 10. How to enter the - 10-1. Pause function set up - 10-2. Tub clean Load detection setup - 11. How to enter the special price day PRODUCT FEATURES - 11-1.

  • Page 10: Parts And Accessories

    PARTS AND ACCESSORIES PARTS AND ACCESSORIES Parts Detergent Detergent dispenser dispenser drawer drawer (for stack model) Water inlets Control panel Shipping Door Power cord Door seal bolts Magnet Door Plunger Drain hose (see page 2) Leveling feet Drain pump filter cover Drain pump filter Drain hose Accessories...

  • Page 11: Control Panel Features

    PARTS AND ACCESSORIES Control panel features OPL type -Side by side(FH069FD3FS) -Stack(FH069FD2FS) Coin type - Side by side(FH069FD4FS) 1. Display LED 4. Start button 2. Cycle button 5. Status LED 3. Optional function button...
  • Page 12 PARTS AND ACCESSORIES Status LED Display LED Cycle button Start button Optional function button Display LED Optional function button The display shows the vend price and Custom PGM: Customized cycle program can remaining time and programming options. be used. Only available in OPL type. Press and hold the Cold button for 3 seconds, Error codes are also displayed here.

  • Page 13: Installation Instructions

    INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Checking and choosing the Installing on a floor proper location ” (570mm) Install the washing machine on a solid floor that is strong and rigid enough to support the weight of the washing machine, even when fully loaded, without flexing or bouncing.

  • Page 14: Unpacking And Removing Shipping Bolts

    INSTALLATION INSTRUCTIONS Unpacking and removing shipping bolts When removing the washer from the carton NOTE base, be sure to remove the foam drum support in the middle of the carton base. • Save the bolt assemblies for future use. To If you must lay the washer down to remove prevent damage to internal components, the base packaging materials, always lay it...

  • Page 15: Connecting The Water Lines

    Do not reuse old hoses. Use only the inlet hoses provided with the • Do not overtighten. Damage to the cou- washer. LG does not recommend the use pling can result. of aftermarket hoses. • Periodically check the hoses for cracks, leaks and wear, and replace the hoses every 5 years.

  • Page 16: Connecting The Drain Line

    INSTALLATION INSTRUCTIONS Connecting the drain line Using a laundry tub Clip the end of the hose into the elbow Secure the drain hose in place to prevent bracket. moving and leaking. - Connect the elbow bracket within 4 inches NOTE (10 cm) from the end of the drain hose.

  • Page 17: Leveling The Washing Machine

    INSTALLATION INSTRUCTIONS Leveling the washing machine Check the washing machine’s level again. - Push or rock the top edges of the washing machine gently to make sure that the The washer tub of your new washing machine washing machine does not rock. spins at very high speeds.

  • Page 18: Preparation

    PREPARATION PREPARATION Precautions for fabric care before wash cycle Read and observe the following to prevent shrinkage or damage to clothes. u Check all pockets to make sure that they are u Brush heavy soil, dust, or hair off fabrics empty.

  • Page 19: Fabric Care Labels

    PREPARATION Fabric care labels Sorting laundry Most articles of clothing feature fabric care It is recommended that you sort laundry into labels that include instructions for proper care. similar loads that are washable in the same cycle. Refer to the following chart for sorting clothes Category Label Directions...
  • Page 20 PREPARATION About the dispenser The automatic dispenser consists of three compartments which hold: • Liquid chlorine bleach. • Liquid fabric softener. • Liquid and powdered detergent and colorsafe bleach for main wash. All laundry products can be added at once in their respective dispenser compartments.

  • Page 21: Loading The Dispenser

    PREPARATION Loading the dispenser Liquid Bleach Compartment Main Wash Detergent Compartment This compartment holds laundry detergent This compartment holds liquid chlorine bleach, for the main wash cycle, which is added to which will be dispensed automatically at the proper time during the wash cycle. the load at the beginning of the cycle.

  • Page 22: Operating Your Washer

    OPERATING YOUR WASHER OPERATING YOUR WASHER 1. Ready mode 3. Select the cycle 1) Coin / Card type Press the desired button and press the start button. – The cycle LEDs are lit at the same time, The display LED will show the remaining when the price of cycles are equal.

  • Page 23: Programming Mode

    PROGRAMMING MODE PROGRAMMING MODE : You can check machine information or change setting on “Program setup”, “Collect Information Data”, ”Diagnostic Test”. How to enter "Programming mode" How to use button You can enter programming mode only for Idle You can change Washer vend price, cycle time state and pause state.
  • Page 24 PROGRAMMING MODE Coin type Algorithm flow chart shows how to control programming mode. Before program set, check the structure of programming mode. 1. Turn on/off toggle switch(PUSH THE TWO KEY) or Insert service card, for entering Programming mode. 2. Press 90°C (194°F) button to move to the upper level. 3.
  • Page 25 PROGRAMMING MODE OPL type Algorithm flow chart shows how to control programming mode. Before program set, check the structure of programming mode. The method of entering set up mode. 1) Push the 90°C (194°F) & 60°C (140°F) button at the same time. 2) Push the 75°C (167°F) button 3 times.

  • Page 26: Programming Mode - Setup Mode

    PROGRAMMING MODE - SETUP MODE Setup Mode : (display) You can change washer vend price, cycle time, and cycle parameters, etc. Entering set up mode - Coin type – Turn on/off toggle switch. - Coin/OPL type 1) Push the 90°C (194°F) & 60°C (140°F) button at the same time. 2) Push the 75°C (167°F) button 3 times.

  • Page 27: How To Change Regular Cold Price

    PROGRAMMING MODE - SETUP MODE 2. How to change regular cold price. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.

  • Page 28: How To Change Regular 30˚C(86˚F) 40˚C(104˚F)/60˚C(140˚F) Price

    PROGRAMMING MODE - SETUP MODE 3. How to change regular 30˚C(86˚F)/40˚C(104˚F)/60˚C(140˚F) price Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.

  • Page 29: How To Change Regular 75˚C(167˚F)/90˚C(194˚F) Price

    PROGRAMMING MODE - SETUP MODE 4. How to change regular 75˚C(167˚F)/90˚C(194˚F) price Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.

  • Page 30: How To Change Special Price

    PROGRAMMING MODE - SETUP MODE 5. How to change special price Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.

  • Page 31: How To Change Special Cold Price

    PROGRAMMING MODE - SETUP MODE 6. How to change special cold price Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.

  • Page 32: How To Change Special 30˚C(86˚F) 40˚C(104˚F)/60˚C(140˚F) Price

    PROGRAMMING MODE - SETUP MODE 7. How to change special 30˚C(86˚F)/40˚C(104˚F)/60˚C(140˚F) price Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.

  • Page 33: How To Change Special 75˚C(167˚F)/90˚C(194˚F) Price

    PROGRAMMING MODE - SETUP MODE 8. How to change special 75˚C(167˚F)/90˚C(194˚F) price Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.

  • Page 34: How To Enter The 35 - 9-1. Special Price Day Setup

    PROGRAMMING MODE - SETUP MODE 9. How to enter the can be used to determine functions of the machine. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 35 PROGRAMMING MODE - SETUP MODE 9-1. Special price day setup Special price days can be used to set special prices (discounts) on select days. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 36: Non-Stop Rinse

    PROGRAMMING MODE - SETUP MODE 9-2. Non-stop rinse Non-stop rinse setup can be used to enable/disable simultaneous rinse & spin. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 37: Vend Type Setup - Coin Type Setup

    PROGRAMMING MODE - SETUP MODE 9-3. Vend type setup - coin type setup Vend type setup can be used to select payment type between coin type and card type. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 38: Pre-Wash Set Up

    PROGRAMMING MODE - SETUP MODE 9-4. Pre-wash set up Pre-wash setup can be used to enable/disable a short wash cycle before the main wash. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 39: Twin Spray Set Up

    PROGRAMMING MODE - SETUP MODE 9-5. Twin spray set up Twin spray setup can be used to enable/disable water circulation during tumble. Twin spray pumps up water in the bottom of the tub to spray on laundry while tumbling. Button Display Entering set up mode.

  • Page 40: How To Enter The 41 - 10-1. Pause Function Set Up

    PROGRAMMING MODE - SETUP MODE 10. How to enter the can be used to determine functions of the machine. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 41 PROGRAMMING MODE - SETUP MODE 10-1. Pause function set up Pause function setup can be used to enable/disable the ability to pause the cycle when pressing the Start/Pause button. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 42: Tub Clean Load Detection Setup

    PROGRAMMING MODE - SETUP MODE 10-2. Tub clean Load detection setup Tub clean load detection setup can be used to enable/disable the ability to detect laundry load in the tub during tub clean. Button Display Enter setup mode. You will see LqC1 Press the 90°C (194°F) button.

  • Page 43: How To Enter The Special Price Day

    PROGRAMMING MODE - SETUP MODE 11. How to enter the special price day can be used to select days to apply special prices. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 44: How To Change To Sunday

    PROGRAMMING MODE - SETUP MODE 11-1. How to change to Sunday Special prices can be enabled/disabled for each day of the week. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 45: Special Price Beginning Time Setup

    PROGRAMMING MODE - SETUP MODE 12. Special price beginning time setup can be used to set the beginning time of hourly time range for special price. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 46: Special Price Ending Time Setup

    PROGRAMMING MODE - SETUP MODE 13. Special price ending time setup can be used to set the ending time of hourly time range for special price. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 47: Prewash Time Setup

    PROGRAMMING MODE - SETUP MODE 14. Prewash time setup Prewash time setup can be used to set the time for prewash. Button Display Enter setup mode. You will see LqC1 Press the 90°C (194°F) button. Press the 75°C (167°F) or the 60°C (140°F)button until appears in the display.

  • Page 48: Washing Time Set Up

    PROGRAMMING MODE - SETUP MODE 15. Washing time set up Washing time setup can be used to set the time for the main wash. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 49: Rinsing Times Per Cycle

    PROGRAMMING MODE - SETUP MODE 16. Rinsing times per cycle can be used to set the number of rinses for each cycle. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 50: Rinsing Time Setup

    PROGRAMMING MODE - SETUP MODE 17. Rinsing time setup Rinsing time setup can be used to set the time for each rinse. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 51: Top Spin Speed - Final Spin Time Depends

    PROGRAMMING MODE - SETUP MODE 18. Top spin speed – final spin time depends on RPM Top spin speed setup can be used to set the maximum spin RPM. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 52: Value Of Coin

    PROGRAMMING MODE - SETUP MODE 19. Value of coin 1 Value of coin 1 can be used to set the incremental coin value. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 53: Value Of Coin

    PROGRAMMING MODE - SETUP MODE 20. Value of coin 2 Value of coin 2 can be used to set the incremental coin value for kiosk systems. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 54: Penny Increment Pricing Offset

    PROGRAMMING MODE - SETUP MODE 21. Penny increment pricing offset (Use only for Card type) This represents the cent increment price offset used when debit card is setup. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 55: How To Change The Water Level

    PROGRAMMING MODE - SETUP MODE 22. How to change the water level You can change the water level by selecting options. indicate water level 23,8 [KHz] (cold course : 23,8 KHz) indicate water lever 23,3 [KHz] (cold course : 23,5 KHz) indicate water lever 23,0 [KHz] (cold course : 23,0 KHz) Button Display...

  • Page 56: Beep Volume

    PROGRAMMING MODE - SETUP MODE 23. Beep volume Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 57: Time To Keep The Coin

    PROGRAMMING MODE - SETUP MODE 24. Time to keep the coin (Use only for coin type) can be used to set the duration of maintaining the value of inserted coins. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 58: How To Setting Drop Count

    PROGRAMMING MODE - SETUP MODE 25. How to setting drop count can be used to set the number of drop counts. Drops occur while the machine checks for balancing of the load as the cycle enters higher RPM. Button Display Entering set up mode.

  • Page 59: How To Set Shut Down Time After Ue

    PROGRAMMING MODE - SETUP MODE 26. How to set shut down time after UE Unbalance Error (UE) occurs when washer cannot balance the load within the selected drop counts. can be used to set the time for maintaining the UE status before shutting down the cycle. Button Display Enter setup mode.

  • Page 60: How To Set Rinse Spin Enable

    PROGRAMMING MODE - SETUP MODE 27. How to set rinse spin enable can be used to enable/disable spinning before each rinse cycle. Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 61: How To Set Drop Count For Rinse Spin

    PROGRAMMING MODE - SETUP MODE 28. How to set drop count for rinse spin can be used to set the number of drop counts for each rinse spin. Button Display Enter setup mode. You will see LqC1 Press the 90°C (194°F) button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.

  • Page 62: How To Set Auto Dosing

    PROGRAMMING MODE - SETUP MODE 29. How to set auto dosing can be used to set the duration of auto dosage for each channel. Button Display Enter setup mode. You will see LqC1 Press the 90°C (194°F) button. Press the 90°C (194°F) or the 60°C (140°F) button until appears in the display.

  • Page 63: How To Enter The 64 - 31. How To Set Custom Program

    PROGRAMMING MODE - SETUP MODE 30. How to enter the Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button. Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display.
  • Page 64 PROGRAMMING MODE - SETUP MODE 31. How to set custom program Button Display Entering set up mode. Press the 90°C (194°F) button. You will see LqC1 Press the 75°C (167°F) or the 60°C (140°F) button until appears in the display. Press the Start button.

  • Page 65: Programming Mode - Test Mode

    PROGRAMMING MODE - TEST MODE PROGRAMMING MODE - TEST MODE Diagnostic tests: (display) This program has been added for testing the washer and detecting errors. Entering the test mode Data Name Button Display Description Entering 1. Entering Insert service card (card type), turn on/off the test mode programming mode toggle switch (Coin type).

  • Page 66: Factory Reset

    PROGRAMMING MODE - TEST MODE 2. Factory reset - After factory reset, machine information is changed to the default value. Button Display Entering set up mode. Press the 75°C (167°F) or the 60°C (140°F) button until You will see LqC1 appears in the display.

  • Page 67: Time Set Up

    PROGRAMMING MODE - TEST MODE 3. Time set up Button Display Entering set up Press the 75°C (167°F) or the 60°C (140°F) button until mode. appears in the display. You will see LqC1 Press the Start button. The display will cycle through 2000 --> 0101 --> Sat --> 0000 repeatedly.

  • Page 68: Courtesy Cycle

    PROGRAMMING MODE - TEST MODE 4. Courtesy cycle A courtesy cycle is like a complimentary cycle given to the customer when the washer goes out of order after the customer has made the payment to wash clothes. Button Display Entering set up mode.

  • Page 69: Cycle Kill

    PROGRAMMING MODE - TEST MODE 5. Cycle Kill Coin / OPL type Button Display Entering set up mode. Press the 75°C (167°F) or the 60°C (140°F) button until You will see LqC1 appears in the display. Press the Start button. Press the 75°C (167°F) button until appears in the display.

  • Page 70: Password

    PROGRAMMING MODE - TEST MODE 6. Password - How to change the password. Button Display Entering set up mode. Press the 75°C (167°F) or the 60°C (140°F) button until You will see LqC1 appears in the display. Press the Start button. Press the 75°C (167°F) button until appears in the display.

  • Page 71: Tub Clean

    PROGRAMMING MODE - TEST MODE 7. Tub clean - To clean up the tub, please run the TUB CLEAN cycle. Button Display Entering Tub Clean Press and hold the 75°C (167°F) button for at least 3 in ready/idle mode. seconds. Pay type: Price is Display shows default number of Tub Clean cycle runs displayed.

  • Page 72: Programming Mode - Collect Mode

    PROGRAMMING MODE - COLLECT MODE PROGRAMMING MODE - COLLECT MODE Collect information data : (display) The washer collects the usage data so that the owner can check various information like number of various cycles used, how many times coins used, etc. Entering the collect mode Data Name Button...

  • Page 73: Collect Mode Data Lists

    PROGRAMMING MODE - COLLECT MODE Collect Mode Data lists No. Abbreviation Meaning Description rgPr Regular Price 0,00 ~ 10,00 rgCP Regular Cold Price 0,00 ~ 10,00 rgrP Regular 40˚C(104˚F)/60˚C(140˚F) Price 0,00 ~ 10,00 rgHP Regular 75˚C(167˚F)/90˚C(194˚F) Price 0,00 ~ 10,00 dELC Dryer Moisture Sense 0: disable...

  • Page 74: Maintenance

    MAINTENANCE MAINTENANCE Care after wash Cleaning the Dispenser After the cycle is finished, wipe the door and the 1. The dispenser should be cleaned periodically inside of the door seal to remove any moisture. to remove buildup from detergent and other Leave the door open to dry the washer tub laundry products.

  • Page 75: Cleaning The Water Inlet Filters

    MAINTENANCE Cleaning the water inlet filters WARNING Clean the water inlet filters periodically to • Unplug the power cord and turn off the prevent clogging. Take extra care to clean the faucets before cleaning. Failure to do so water inlet filters for areas using hard water. may cause electric shock.

  • Page 76: Cleaning The Drain Pump Filter

    MAINTENANCE Cleaning the drain pump filter The washing machine fails to drain if the drain pump filter is clogged. Periodically clean the drain filter to prevent clogging with foreign objects. Pull out the plug to turn off the washing Recap the plug onto the drain hose and machine.

  • Page 77: Clean The Door Seal

    MAINTENANCE NOTE Clean the door seal Distributer Clean the door seal once a month to prevent build-up of dirt in the door seal. Wear rubber gloves and protective goggles. Meadowcroft Lane, Ripponden, West Dilute 3/4 cup (177 ml) of liquid chlorine Yorkshire HX6 4AJ, United Kingdom bleach in 1 gallon (3.8 L) of water.

  • Page 78: Error Mode

    ERROR MODE ERROR MODE Meaning of Error Codes that LED displays during occurrence of problem. Problem Possible Cause Solution • Water supply is not adequate in area. Check another tap in the house. • Water supply taps are not completely open. Fully open tap.

  • Page 79: Power Fail Recovery

    POWER FAIL RECOVERY & DEFAULT WASHER SETTINGS & SPECIFICATIONS POWER FAIL RECOVERY In case of power failure, the machine stops running but the time display remains on, showing the time just before power failure. DEFAULT WASHER SETTINGS Default Settings Default Wash Time (Minutes) 31 Minutes Rinse Time (Minutes)

  • Page 80: Specifications

    POWER FAIL RECOVERY & DEFAULT WASHER SETTINGS & SPECIFICATIONS SPECIFICATIONS Model Name Front-loading Washing Machine Power supply 220-240V~, 50Hz 686 mm (W) X 767 mm (D) X 983 mm (H), 1337 mm (D with door open) Size 27”(W) X 30 ”(D) X 38 ”(H), ”(D with door open)
  • Page 81 MEMO MEMO...
  • Page 82 MEMO MEMO...
  • Page 83 MEMO MEMO...

This manual is also suitable for:

Fh069fd4fsFh069fd3fs

Table of Contents