Table of Contents
Advertisement
GETTING STARTED
[DISPLAY]
[EASY MENU]
(For
When entering [FUNCTION]...
[ON]: [ZONE 1] illumination changes to white color. ;
[OFF]: [ZONE 1] illumination remains as [COLOR SELECT] color. (Page 24)
• [ZONE 2] illumination changes to light blue color when you enter [FUNCTION],
irregardless of the [EASY MENU] setting.
• Refer to the illustration on page 24 for zone identification.
[TUNER SETTING]
[PRESET TYPE]
[NORMAL]: Memorizes one station for each preset button in each band (FM1/
FM2/FM3/AM/SW1/SW2). ; [MIX]: Memorizes one station for each preset button,
regardless of the selected band.
[SYSTEM]
[KEY BEEP]
(Applicable only if [X'OVER] is set to [2WAY].)
[ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[TDF ALARM]
(Applicable only if [X'OVER] is set to [2WAY].)
[ON]: Activates the alarm if you forget to detach the faceplate when ACC is set to OFF. ;
[OFF]: Deactivates.
[SOURCE SELECT]
[SPOTIFY SRC]
[ON]: Enables SPOTIFY/SPOTIFY BT in source selection. ; [OFF]: Disables.
(Page 10)
[BUILT-IN AUX]
[ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 7)
[CD READ]
[1]: Automatically distinguishes between audio file disc and music CD. ; [2]: Forces
to play as a music CD. No sound can be heard if an audio file disc is played.
[F/W UPDATE]
[UPDATE SYSTEM]
[F/W UP xxxx]
[YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not activated).
For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.
)
[FACTORY RESET]
[YES]: Resets the settings to default (except the stored station). ;
[NO]: Cancels.
[CLOCK]
[CLOCK DISPLAY]
[ON]: The clock time is shown on the display even when the unit
is turned off. ; [OFF]: Cancels.
[ENGLISH]
Select the display language for [FUNCTION] menu and music
information if applicable.
[TURKCE]
By default, [ENGLISH] is selected.
Change the crossover type
1
Press B SRC repeatedly to enter STANDBY.
2
Press and hold number buttons 4 and 5 to enter crossover
select.
The current crossover type appears.
3
Turn the volume knob to select "2WAY" or "3WAY", then press
the knob.
4
Turn the volume knob to select "YES" or "NO", then press the
knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, see page 21.
Caution:
Select a crossover type according to how the speakers are connected.
(Page 32, 33)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
.
ENGLISH
5
Hide quick links:
Advertisement
Table of Contents
