Introduction Information for these operating instructions These operating instructions are a component of the Spa Bath Mat SLB 450 A1 (henceforth designated as the appliance) and they provide you with important information about the intended use, safety and connection as well as operation of the appliance.
Introduction Warnings In the existing operation instructions the following warnings are used: DANGER A warning at this danger level indicates a threateningly dangerous situation. If the dangerous situation is not avoided, it could result in death or serious injury. ► Follow the instructions given in this warning notice to avoid the risks of death or serious injury to people.
Safety In this chapter you receive important safety information regarding handling of the appliance. This appliance complies with the statutory safety regulations. Incorrect usage can, however, lead to personal injury and property damage. Use Restrictions Do not use the appliance: ■...
Safety Interaction with batteries WARNING Danger from improper use! For safe handling of batteries observe the following safety instructions: ► Do not throw the batteries into a fi re. ► Never short-circuit batteries. ► Do not attempt to recharge batteries. ►...
■ A repair to the appliance during the warranty period may only be carried out by a customer service department authorized by the manufacturer otherwise no additional warranty claims can be considered for subsequent damages. ■ Defective components may only be replaced with original replacement parts. Only by using original replacement parts can you guarantee that the safety requirements are complied with.
Setting up and connecting Setting up and connecting Safety instructions WARNING Damage to people and property may occur when operating the appliance! Observe the following safety information to avoid any risks: ► Packaging material should not be used as a play thing. There is a risk of suff...
Disposal of the packaging The packaging protects the appliance from transport damage. The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable. The recirculation of packaging into the material circuit saves on raw material and reduces generated waste.
Setting up and connecting Electrical connections ■ Before you connect up, compare the connection data (voltage and frequency) on the plate of the appliance with that of your electrical network. This data must match in order to avoid damage to the appliance. ■...
Place the air-bubble mat connection-support for the air hose Press the air-bubble mat secured onto the bath tub fl oor by its suction cups. NOTICE ► The suction cups of the air-bubble mat attach themselves to the bottom of the bath tub much easier and more fi rmly if you fi rst moisten them slightly before pressing.
Setting up and connecting Connecting the air hose First connect the air hose With this, ensure that the plastic cam aligns exactly with the recess in the connection-support Then turn the hose connector of the air hose the symbol of the pump Afterwards, insert the hose fi...
Electrical connections DANGER Risk of fatal electrocution! Contact with wires or components carrying mains power could be potentially fatal! Observe the following safety notices to avoid risks from electrical hazards: ► Do not operate the appliance if the power cable or the plug are damaged. ►...
Handling and operation NOTICE ► In the same way, the pump may be switched on or off using the remote control by pressing the function button Functions The appliance off ers three diff erent operating modes: ■ Continuous with low intensity ■...
Function selection with the remote control IMPORTANT Risk of damage from water intrusion. ► Using the suction cups on the back of it, attach the remote control onto the tiles next to your bath tub. NOTICE ► To ensure faultfree operation of the remote control operation so that it points directly to the pump Switch the pump operation indicator...
Cleaning/Troubleshooting Cleaning Safety instructions DANGER Risk of fatal electrocution! ► Remove the plug from the mains power socket before beginning to clean the appliance. IMPORTANT Damage to the appliance! ► In order to avoid irreparable damage to the appliance, ensure that no moisture can permeate into the pump housing when you are cleaning it.
Malfunction causes and remedies The following table will help with localising and eliminating minor malfunctions: Defect Appliance does not switch on. Appliance does not let itself be switched off . There are no air bubbles exiting the air-bubble mat. Air-bubble mat does not adhere to the fl...
Storage/Disposal Storage/Disposal Storage If you do not intend to use the appliance for a long time, unplug it from the mains power socket, remove the air hose and store it in a clean, dry place away from direct sunlight.. Clean the air bubble mat and let it dry well. Remove the battery from the remote control.
Appendix Notes on the EC Declaration of Conformity This device complies, in regards to conformance with the basic requirements and other relevent regulations, with the EMC Directive 2004/108/EC, as well as the Directive for Low Voltage Devices 2006/95/EC. The complete original declaration of conformity can be obtained from the importer.
Appendix Warranty With this appliance you receive a warranty of 3 years from the date of purchase. This appliance has been manufactured with care and thoroughly tested before delivery. Please retain your receipt as proof of purchase. In the case of a warranty claim, please make contact by telephone with our service department.