Table of Contents
Advertisement
Install and Upgrade Internal Modules and FRUs
Insert a Micro-SIM Card
This section describes how to insert a Micro-SIM card into an LTE pluggable module.
Caution
Do not touch any part of the exposed PCB circuit area when the Micro-SIM cover is removed.
Figure 28: Insert the Micro-SIM cards
Item
1
2
To insert the Micro-SIM cards into the LTE Pluggable module:
1. Place the router on its bottom side, remove the screws and then the Micro-SIM cover from the pluggable
module.
2. Push in each Micro-SIM card into the slot until it clicks.
3. Secure the Micro-SIM cover with a screw. The recommended torque is 2.8 - 3.8 inch LBF.
You have now successfully inserted the Micro-SIM cards into the LTE pluggable module.
Remove and Replace the 1GB Flash Token Memory Stick
The Cisco 1100 Series ISR has a port for 1 GB flash token memory stick to store configurations or Cisco IOS
XE consolidated packages.
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
Description
Micro-SIM 1 (Towards the device)
Micro-SIM 0 (Away from the device)
Insert a Micro-SIM Card
49
Hide quick links:
Advertisement
Table of Contents
