Dot1X Initialize - Cisco Catalyst 3550 Command Reference Manual

Multilayer switch

Hide thumbs Also See for Catalyst 3550:

Table of Contents

Cisco IOS Commands

dot1x initialize

Use the dot1x initialize privileged EXEC command to manually return an 802.1X-enabled port to an

unauthorized state before initiating a new authentication session on the interface.

Syntax Description

This command has no arguments or keywords.

There is no default setting.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

Use this command to manually return a device connected to a switch interface to an unauthorized state

before initiating a new authentication session on the interface.

This example shows how to manually return a device connected to Fast Ethernet interface 0/1 to an

unauthorized state:

Switch# dot1x initialize interface fastethernet0/1

You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC

Related Commands

interface-id]

dot1x initialize interface interface-id

Modification

This command was first introduced.

Displays 802.1X status for the specified interface.

Catalyst 3550 Multilayer Switch Command Reference

dot1x initialize