hit counter script
Siemens SITOP PSU8200 3ph Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Power Supply
  5. SITOP PSU8200 3ph
  6. Manual

Siemens SITOP PSU8200 3ph Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

SITOP PSU8200 3ph
SITOP power supply
SITOP PSU8200 3ph
Manual
SITOP PSU8200 24 V/20 A
6EP3436-8SB00-0AY0
SITOP PSU8200 24 V/40 A
6EP1437-3BA10
11.2014
C98130-A7638-A1-2-7629
___________________
Overview
___________________
Notes on safety
Description, device design,
___________________
dimension drawing
___________________
Mounting/removing
Mounting position, mounting
___________________
clearances
___________________
Installation
___________________
Technical data
___________________
Safety, approvals, EMC
___________________
Ambient conditions
___________________
Applications
___________________
Environment
___________________
Service & Support
1
2
3
4
5
6
7
8
9
10
11

Advertisement

Table of Contents
loading

Related Manuals for Siemens SITOP PSU8200 3ph

Summary of Contents for Siemens SITOP PSU8200 3ph

  • Page 1 ___________________ SITOP PSU8200 3ph Overview ___________________ Notes on safety Description, device design, ___________________ SITOP power supply dimension drawing ___________________ Mounting/removing SITOP PSU8200 3ph Mounting position, mounting ___________________ clearances ___________________ Installation Manual ___________________ Technical data ___________________ Safety, approvals, EMC ___________________ Ambient conditions...
  • Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Overview

    ● Signaling contact "24 V O.K." ● To increase the system availability, these reliable power supplies can be expanded using SITOP supplementary modules (redundancy module, selectivity module, buffer module), as well as SITOP DC-UPS modules. SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 4 Overview Ordering data The following device versions are available: Regulated power supply unit SITOP PSU8200 3ph Type Order number 3-phase 400-500 V AC input, 6EP3436-8SB00-0AY0 24 V/20 A output 3-phase 400-500 V AC input, 6EP1437-3BA10 Output 24 V DC / 40 A...

  • Page 5: Table Of Contents

    Technical data ............................29 Input ............................29 Output ............................. 30 Efficiency ..........................34 Closed-loop control ......................... 35 Protection and monitoring ....................... 35 MTBF ............................35 Mechanical system ......................... 36 Accessories ..........................36 Dimension drawing ......................... 37 SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 6 Series connection for increased voltage ................49 Overload protection in the 24 V output circuit ................ 50 Protection against short-time voltage dips ................51 Protecting against longer power failures ................52 Environment ............................55 Service & Support ..........................57 SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 7: Notes On Safety

    Before installation or maintenance work can begin, the system's main switch must be switched off and measures taken to prevent it being switched on again. If this instruction is not observed, touching live parts can result in death or serious injury. SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 8 Notes on safety SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 9: Description, Device Design, Dimension Drawing

    Description, device design, dimension drawing Device description SITOP PSU8200 3ph is a primary-clocked power supply for connection to a 3-phase AC line supply. An electronically regulated DC voltage that can be set via a potentiometer is available at the output of the device. The output of the device is isolated, no-load proof and short-circuit proof.

  • Page 10: Connections And Terminal Designation

    One screw terminal each signaling contacts 13, 14 Do not subject the end stop to higher loads Figure 2-2 Terminal data 6EP3436-8SB00-0AY0 Do not subject the end stop to higher loads Figure 2-3 6EP1437-3BA10 terminal data SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 11: Potentiometer

    It is only permissible to use an insulated screwdriver when actuating the potentiometer. For notes on actuating the potentiometer (screwdriver, torque), see Figure 2-2 Terminal data 6EP3436-8SB00-0AY0 (Page 10) and Figure 2-3 6EP1437-3BA10 terminal data (Page 10) SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 12: Status Displays And Signaling

    Overload, output voltage <20 V ±0.5 V (only in "constant current" mode) (only in "constant current" mode) Signaling contact, contacts 13-14 open (quiescent position) Yellow and green LED lights Phase failure, output voltage O.K. Signaling contact, contacts 13-14 closed SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 13 Latching shutdown Latching shutdown Signaling contact, contacts 13-14 open (quiescent position) LED flashing red Overtemperature → power OFF/ON Overtemperature → power OFF/ON after 3 min after 3 min Signaling contact, contacts 13-14 open (quiescent position) SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 14: Change-Over Switch

    During these first 10 s, the device responds for overload as if the switch is OFF. Delivery state: A-OFF; B-OFF Note Selector switches may only be activated when the device is switched off. SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 15: Block Diagram

    Description, device design, dimension drawing 2.6 Block diagram Block diagram Figure 2-7 Block diagram SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 16: Dimensions And Weight

    6EP3436-8SB00-0AY0 (24 V/20 A) 6EP1437-3BA10 (24 V / 40 A) Dimensions (W × H × D) in mm 70 × 125 × 125 150 × 125 × 150 Weight approx. 1.2 kg approx. 3.4 kg SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 17: Mounting/Removing

    WARNING Installing the device in a housing or a control cabinet The SITOP PSU8200 3ph power supply is a built-in device. It must be installed in a housing or control cabinet, to which only qualified personnel have access. The device can be mounted in a control cabinet on standard mounting rails according to EN 60715.
  • Page 18 If the devices are to be used in hazardous zones (Ex II 3G Ex nA nC IIC T4 Gc ) they must be installed in a distribution box with degree of protection IP54 or higher. SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 19: Mounting Position, Mounting Clearances

    No space is required at the side. Output current as a function of the ambient temperature and mounting height Figure 4-1 6EP3436-8SB00-0AY0: Output current in the standard mounting position Figure 4-2 6EP1437-3BA10: Output current in the standard mounting position SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 20 Mounting position, mounting clearances 4.1 Standard mounting position Figure 4-3 Mounting height derating For details, see Ambient conditions (Page 43) SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 21: Other Mounting Positions

    Particularly when installing on a vertically fastened standard mounting rail, additional measures may be required, e.g. to prevent the device from slipping on the standard mounting rail. 4.2.1 6EP3436-8SB00-0AY0 Figure 4-4 6EP3436-8SB00-0AY0 mounting position (1) Figure 4-5 6EP3436-8SB00-0AY0 mounting position (2) SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 22 Mounting position, mounting clearances 4.2 Other mounting positions Figure 4-6 6EP3436-8SB00-0AY0 mounting position (3) Figure 4-7 6EP3436-8SB00-0AY0 mounting position (4) Figure 4-8 6EP3436-8SB00-0AY0 mounting position (5) SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 23: 6Ep1437-3Ba10

    Mounting position, mounting clearances 4.2 Other mounting positions 4.2.2 6EP1437-3BA10 Figure 4-9 6EP1437-3BA10 mounting position (1) Figure 4-10 6EP1437-3BA10 mounting position (2) Figure 4-11 6EP1437-3BA10 mounting position (3) SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 24 Mounting position, mounting clearances 4.2 Other mounting positions Figure 4-12 6EP1437-3BA10 mounting position (4) Figure 4-13 6EP1437-3BA10 mounting position (5) SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 25: Installation

    Line-side connection The SITOP PSU8200 3ph power supply is designed for connection to a 3-phase AC line supply with a rated voltage of 400-500 V AC, 50/60 Hz.
  • Page 26 Installation 5.1 Line-side connection Protection SITOP PSU8200 3ph Line-side protection 6EP3436-8SB00-0AY0 Required: 3-pole coupled miniature circuit breaker (IEC 898) characteristic C, (24 V/20 A) 6 ... 16 A or 3RV2011-1DA10 circuit breaker, setting of the thermal overcurrent trip: 3 A or...

  • Page 27: Output-Side Connection

    5.2 Output-side connection Output-side connection At its output, the SITOP PSU8200 3ph power supply provides an isolated (= non-grounded) SELV output voltage (Safety Extra Low Voltage). The output of the power supply is no-load, overload and short-circuit proof. If an overload occurs, the electronic current limiting function limits the output current to a maximum value (see Section Technical data (Page 29)).
  • Page 28 Installation 5.2 Output-side connection SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 29: Technical Data

    10 ... 16 A characteris- C, 6 ... 16 A or 3RV2011-1DA10 circuit tic C or RV2011-1DA10 circuit breaker breaker, (setting 3 A) or (setting 3 A) or 3RV2711-1DD10 3RV2711-1DD10 (UL 489) (UL 489) SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 30: Output

    20 A 40 A Current range 0 … 20 A 0 … 40 A +60 ...+70 °C derating: approx. 3 % +60 .. +70 °C derating: approx. 4 % Remark • Ia rated/K Ia rated/K SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 31 Output characteristic See Figure 6-3 Output characteristic See Figure 6-4 6EP1437-3BA10 single curve 6EP3436-8SB00-0AY0 single operation output characteristic curve operation (Page 32) (Page 32) Figure 6-2 Starting delay/voltage rise SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 32 Selector switch A closed (parallel operation): The output voltage decreases with increasing output current. Figure 6-5 Output characteristic curve 6EP3436-8SB00-0AY0 parallel operation SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 33 The device is shutdown if the overload lasts longer than 100 ms. A reset is initiated by switching off the power supply for longer than 5 s. Figure 6-7 Output characteristic curve 6EP3436-8SB00-0AY0 latching shutdown Figure 6-8 6EP1437-3BA10 latching shutdown output characteristic curve SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 34: Efficiency

    Power loss at Ua rated, Ia rated, approx. 31 W 78 W No-load operation power loss, approx. 3.6 W 7.4 W Power loss in the "latching shutdown" 3.6 W 4.7 W state Figure 6-9 Efficiency 6EP3436-8SB00-0AY0 Figure 6-10 Efficiency 6EP1437-3BA10 SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 35: Closed-Loop Control

    6EP1437-3BA10 (24 V / 40 A) Mean Time Between Failures SN29500: >500000 hours at 40 °C, SN29500: > 500,000 hours (typ. rated load, 24-hour operation 700,000 hours) at 40° C, rated load, 24-hour operation SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 36: Mechanical System

    EN 60715 35x7,5/15 mounting rails EN 60715 35x15 mounting rails Accessories 6EP3436-8SB00-0AY0 (24 V/20 A) 6EP1437-3BA10 (24 V / 40 A) Electrical accessories Buffer module, redundancy module Mechanical accessories Device identification label 20mm x 7mm, Ti-Grey 3RT2900-1SB20 SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 37: Dimension Drawing

    Technical data 6.9 Dimension drawing Dimension drawing See Section Dimensions and weight (Page 16) CAD data that can be downloaded from the Internet: 6EP3436-8SB00-0AY0 (http://www.automation.siemens.com/bilddb/index.aspx?objKey=G_KT01_XX_00969) 6EP1437-3BA10 (http://www.automation.siemens.com/bilddb/index.aspx?objKey=G_KT01_XX_00363) SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 38 Technical data 6.9 Dimension drawing SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 39: Safety, Approvals, Emc

    Leakage current, typ. 1 mA 0.4 mA Leakage current, max. 3.5 mA 3.5 mA Test voltage See Table 7-1 Test voltage for See Table 7-2 Test voltage for 6EP3436-8SB00-0AY0 (Page 40) 6EP1437-3BA10 (Page 41) SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 40: Test Voltage

    3000 VAC 3000 VAC 350 VAC Field test 2200 VDC 2200 VDC 500 VDC 1500 VAC 1500 VAC 350 VAC Note: Tripping current for DC measurement: 0 mA Tripping current for AC measurement: <100 mA SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 41 1500 VAC 1500 VAC 350 VAC Field test 2200 VDC 2200 VDC 500 VDC 1500 VAC 1500 VAC 350 VAC Remark: Tripping current for DC measurement: 0 mA Tripping current for AC measurement: <100 mA SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 42: Approvals

    EN 61000-4-8 30 A/m; 50 Hz Emitted interference EN 55022 Class B Line harmonics limit EN 61000-3-2 Class A Generic standards EN 61000-6-2 Noise immunity for industrial environments EN 61000-6-3 Emission for residential areas SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 43: Ambient Conditions

    8.4 ... 150 Hz 58 ... 150 Hz EN 60068-2-27 shock, test Ea: EN 60068-2-27 shock, test Ea: • • acceleration 150 m/s , test duration acceleration 150 m/s , test duration 11 ms 11 ms SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 44 III to 2000 m (EN 50178) II from 2000 m to 6000 m (EN 50178) II to 2000 m (EN 60950-1) I from 2000 m to 6000 m (EN 60950-1) Storage: 1080 ... 660 hPa (-1000 ...+3500 m) • SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 45: Applications

    "+" terminals that have not yet been connected. The voltage difference should not exceed 50 mV. ● Switch selector switch "A" (see Figure 2-6 Selector switch (Page 14)) to "Parallel operation". Figure 9-1 Parallel connection SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 46 For this purpose, a suitable protective circuit (e.g. decoupling diode or DC-conform circuit breaker) must be installed between each "+" terminal of the power supply and the common connection point. SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 47: Parallel Connection For Redundancy

    Figure 9-2 Redundant configuration with two power supplies and SITOP PSE202U redundancy module Figure 9-3 Redundant configuration with two power supplies and two SITOP PSE202U redundancy modules SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 48 Applications 9.2 Parallel connection for redundancy You can find additional information at: SITOP PSE202U manual (http://support.automation.siemens.com/WW/view/en/42248598) SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 49: Series Connection For Increased Voltage

    When connecting two power supplies in series, the continuous, permissible SELV voltage of a maximum of 60 VDC according to EN 60950 cannot be guaranteed in the case of a fault. Figure 9-4 Series connection SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 50: Overload Protection In The 24 V Output Circuit

    SIMOTION CPUs and SIMOTION SCOUT. You can find additional information at: SITOP PSE200U selectivity module manuals (http://support.automation.siemens.com/WW/view/en/10807226/130000) Figure 9-5 Electronic protection of 24 V consumers with the SITOP PSE200U selectivity module SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 51: Protection Against Short-Time Voltage Dips

    5 A. This time can be increased a multiple number of times by connecting buffer modules in parallel; the maximum buffer time is 10 s. You can find additional information at: SITOP PSE201U manual (http://support.automation.siemens.com/WW/view/en/41129219) Figure 9-6 Buffering brief power failures using the SITOP PSE201U buffer module SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 52: Protecting Against Longer Power Failures

    Using the free-of-charge SITOP DC-UPS software tool, DC-UPS systems can be simply integrated into PC-based automation solutions. This supports further processing of the status signals and safely running down the PC. You can find additional information at: Manual, DC UPS with capacitors (http://support.automation.siemens.com/WW/view/en/48932766/133300) SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 53 – make it easy to integrate operating and diagnostics information into STEP 7 user programs. Preconfigured UPS faceplates for WinCC visualization can be downloaded at no charge. You can find additional information at: DC UPS SITOP UPS1600/UPS1100 Manual (http://support.automation.siemens.com/WW/view/en/84977415) SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 54 Applications 9.6 Protecting against longer power failures SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 55: Environment

    The devices are in conformance with RoHS. As a rule, only non-silicon precipitating materials are used. Disposal guidelines Packaging and packaging aids can and should always be recycled. The product itself may not be disposed of as domestic refuse. SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...
  • Page 56 Environment SITOP PSU8200 3ph Manual, 11.2014, C98130-A7638-A1-2-7629...

  • Page 57: Service & Support

    ● Phone: + 49 (0) 911 895 7222 ● E-Mail (mailto:support.automation@siemens.com) ● Internet: Online support request form (http://www.siemens.de/automation/support-request) Technical documentation on the Internet Operating instructions and manuals for SITOP are available in the Internet: Operating instructions/manuals (http://www.siemens.de/sitop/manuals) SITOP power supply homepage General news about our power supplies is available in the Internet at the SITOP homepage: SITOP (http://www.siemens.de/sitop)
  • Page 58 Service & Support Contact persons If you have any questions regarding the use of our products, then contact the Siemens contact person in your regional Siemens sales office. You can find these addresses as follows: ● On the Internet (http://www.siemens.de/automation/partner) ●...

This manual is also suitable for:

6ep1437-3ba10Sitop psu8200 24 v/20aSitop psu8200 24 v/40a6ep3436-8sb00-0ay0

Table of Contents