hit counter script
Siemens SITOP PSU8600 Function Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Power Supply
  5. SITOP PSU8600
  6. Function manual
Siemens SITOP PSU8600 Function Manual

Siemens SITOP PSU8600 Function Manual

Firmware v1.3 faceplates and communication blocks v2.3 for simatic step 7 v5.5
Hide thumbs Also See for SITOP PSU8600:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual
SITOP Power Supply
SITOP PSU8600 Firmware V1.3:
Faceplates and
Communication Blocks V2.3 for
SIMATIC STEP 7 V5.5
Function Manual
11.2017
A5E37764016-06-76
___________________
Warranty and liability
___________________
Preface
___________________
Overview of the library
___________________
Hardware and software
requirements
___________________
Blocks of the library
___________________
Integrating the library
contents
1
2
3
4
5
6

Advertisement

Table of Contents
loading

Related Manuals for Siemens SITOP PSU8600

Summary of Contents for Siemens SITOP PSU8600

  • Page 1 Warranty and liability ___________________ Preface ___________________ SITOP Power Supply Overview of the library ___________________ Hardware and software requirements SITOP PSU8600 Firmware V1.3: Faceplates and ___________________ Blocks of the library Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 ___________________ Integrating the library contents Function Manual 11.2017...
  • Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Table Of Contents

    6.2.2 Opening the library ........................74 6.2.3 Inserting faceplates ......................... 76 6.2.4 Connecting trends of the faceplates with data sources ............80 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 4 Inserting HMI tags ........................87 6.3.4 Inserting screen windows in a WinCC project ............... 90 Working with the library in WinCC V7.4 ................. 94 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 5: Warranty And Liability

    Any form of duplication or distribution of these application examples or excerpts hereof is prohibited without the expressed consent of Siemens AG. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 6: Security Information

    To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed under https://www.siemens.com/industrialsecurity. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 7: Preface

    ● SITOP PSU8600 Power Supply System Manual: Basic devices with four outputs (https://support.industry.siemens.com/cs/ww/en/view/105867947) ● SITOP PSU8600 Power Supply System Manual: Basic devices with one output (https://support.industry.siemens.com/cs/ww/en/view/109482936) SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 8 Preface SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 9: Overview Of The Library

    ● Interaction of the automation process with the power supply, for example, setting the voltage (5 to 28 V, for a DC drive) or switching an output (in shift pauses). SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 10 Scope of validity of the library ● SIMATIC STEP 7 Professional V5.5 ● WinCC V7.3 ● WinCC V7.4 ● WinCC flexible 2008 SP3 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 11: Hardware And Software Requirements

    SITOP BUF8600 300 ms/40 A (6EP4297- 8HB10-0XY0) or SITOP BUF8600 4 s/40 A (6EP4293-8HB00-0XY0) or SITOP BUF8600 10 s/40 A (6EP4295-8HB00-0XY0) SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 12 SIMATIC WinCC V7.3/V7.4 6AV63.1-…7-3… Depends on the required target system. SIMATIC WinCC flexible 2008 SP3 6AV66.1.-...-3… SIMATIC STEP 7 Professional V5.5 6ES7810-4C...10-... SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 13: Blocks Of The Library

    In addition to the faceplates, the library also contains User Data Types (UDT) for the data connection of SIMATIC STEP 7 blocks. Figure 5-1 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 14: Explanation Of Simatic Step 7 Blocks

    UDT 4026 UDT_Output_CNX_OUT_V2 UDT 4027 UDT_Output_OUT_V2 UDT 4028 UDT_Output_PSU_IN_V2 UDT 4029 UDT_Output_PSU_OUT_V2 UDT 4030 UDT_Slot_Info_Single_V2 UDT 4032 UDT_Slot_Info_V2 UDT 4033 UDT_State_Info_CNX_V2 UDT 4034 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 15: Fb Sitop_Psu8600_V2

    UDT8 5.2.1 FB SITOP_PSU8600_V2 Function principle The function block reads data of the SITOP PSU8600 main module (power supply with 4 outputs) and writes it to the global transfer Data Block (DB). Block diagram Figure 5-2 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5...
  • Page 16 Input/Output parameters Table 5- 3 Parameter Data type Description Data UDT_PSU8600_Data_V2 Data block for global data exchange. DB must follow the UDT structure. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 17 ● Cyclic input address/HW identification address(C) for Output 3, calculates: “276” ● Cyclic Input address/HW identification address(C) for Output 4, calculates: “281” SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 18 Blocks of the library 5.2 Explanation of SIMATIC STEP 7 blocks Figure 5-4 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 19: Fb Sitop_Cnx8600_V2

    The block reads the data of all SITOP CNX8600 4x5A and SITOP CNX8600 4x10A expansion modules and writes it to the global transfer data block. Block diagram Figure 5-5 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 20 Input/output parameters Table 5- 5 Parameter Data type Description Data UDT_PSU8600_Data_V2 Data block for global data exchange. DB must follow the UDT structure. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 21: Fb Sitop_Cnx8600_8X_V2

    The block reads the data of all SITOP CNX8600 8x2.5A expansion modules and writes it to the global transfer data block. Block diagram SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 22 Input/output parameters Table 5- 7 Parameter Data type Description Data UDT_PSU8600_Data_V2 Data block for global data exchange. DB must follow the UDT structure. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 23: Fb Sitop_Buf8600_Ms_V2

    The block reads data of the SITOP BUF8600 (100 ms/40 A and 300 ms/40 A) buffer modules and writes it to the global transfer data block. Block diagram Figure 5-7 Function characteristics Figure 5-8 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 24 Data block for global data exchange. DB must follow the UDT structure. Output parameters Table 5- 10 Parameter Data type Description Operating_state BYTE Operating state of the buffer module. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 25: Fb Sitop_Psu8600_Mu_V2

    On request, the block writes main-module-specific data first into Cyclic Output Memory area (if address is provided) and then into the PSU8600 device. Block diagram Figure 5-9 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 26 Blocks of the library 5.2 Explanation of SIMATIC STEP 7 blocks Function characteristics Figure 5-10 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 27 WORD System overload alarm threshold time (0 to 60000 ms) MainPowerOutageAlarmThr WORD Main power outage alarm threshold time (0 to 1000 ms) SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 28 (10 mA resolution) Device_operating_state BYTE Operating state of the main module. Refer the section Description of Device_Operating_state parameter below. Uaok BYTE Output voltage OK SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 29 Write operation not possible, last write op- Wait until = 1 (edge 0 > 1), only Done eration still incomplete. then write. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 30: Fb Sitop_Psu8600_Output_V2

    On request, the block writes output-specific data into the PSU8600/CNX8600. Block diagram Figure 5-11 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 31 Blocks of the library 5.2 Explanation of SIMATIC STEP 7 blocks Function characteristics Figure 5-12 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 32 Operating mode of the output. (0 = electronic switch-off and 1 = constant current) Startup_Delay_rem WORD Switch-on delay of the output. (0 to 60000 ms) SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 33 Parallel_mode BYTE Parallel mode active (0 = normal; 1 = output switched parallel) → valid only for main module with 4 outputs. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 34: Fb Sitop_Psu8600_S_V2

    The block reads data of the PSU8600 main module (power supply with 1 output) and writes it to the global transfer data block. Block diagram Figure 5-13 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 35 Input/Output parameters Table 5- 24 Parameter Data type Description Data UDT_PSU8600_Data_V2 Data block for global data exchange. DB must follow the UDT structure. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 36: Fb Sitop_Buf8600_S_V2

    The block reads data of the SITOP BUF8600 (4 s/40 A and 10 s/40 A) buffer modules and writes it to the global transfer data block. Block diagram Figure 5-15 Function characteristics Figure 5-16 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 37 Charging state of the buffer module Buf_disabled_by_input BYTE Buffering disabled by input terminals (ex- ample, for safety reasons during mainte- nance operation) SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 38: Fb Sitop_Psu8600_Mu_S_V2

    5.2.9 FB SITOP_PSU8600_MU_S_V2 Function principle This block is used for SITOP PSU8600 with single output only. The block reads the main module specific data from the global DB for data exchange and outputs the data through its output parameters. On request, the block writes the main module specific data first into Cyclic Output Memory area (if address is provided) and then into the PSU8600 device.
  • Page 39 Blocks of the library 5.2 Explanation of SIMATIC STEP 7 blocks Function characteristics Figure 5-18 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 40 WORD System overload alarm threshold time (0 to 60000 ms) MainPowerOutageAlarmThr WORD Main power outage alarm threshold time (0 to 1000 ms) SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 41 (10 mA resolution) Device_operating_state BYTE Operating state of the main module. Refer the section Description of Device_operating_state parameter below. Uaok BYTE Output voltage OK SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 42 Write operation not possible, Wait until = 1 (edge 0 > 1), only then write. Done last write operation still in- complete. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 43: Fb Sitop_Psu8600_Buf_V2

    On request, the block writes main-module-specific data first into Cyclic Output Memory area (if address is provided) and then into the PSU8600 device. Block diagram Figure 5-19 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 44 Blocks of the library 5.2 Explanation of SIMATIC STEP 7 blocks Function characteristics Figure 5-20 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 45 Data block for global data exchange. DB must follow the UDT structure. Output parameters Table 5- 38 Parameter Data type Description Buffering_Out_Param UDT_Buffering_OUT_V2 UDT for buffering output parameters SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 46: Fb Sitop_Psu8600_Diag

    The Block reads diagnostic interrupt data when OB82 is triggered and raises alarm if module address is equals to input “ ”. Diag_Address Block Diagram SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 47 Blocks of the library 5.2 Explanation of SIMATIC STEP 7 blocks SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 48 PSU8600 within the project.The diagnostic address must be speci- fied in decimal format. MsgEvId001..MsgEvId100 INPUT DWORD Message event ids for Diagnostic alarms. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 49: Udt_Psu8600_Data_V2

    Structure of UDT Figure 5-21 Purpose of the UDT The UDT provides the structure in the global data block for data exchange. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 50: Explanation Of Wincc Faceplates

    The secondary navigation for the individual SITOP PSU8600 modules is located on the left. WinCC flexible faceplate for SITOP PSU8600 Figure 5-22 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 51: View: State, Main Device

    System overload within the permissible overload Green, flashing profile detected; the power supply system contin- ues to operate in normal mode. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 52 The diagnostic LED at device or web server is flashing in varying frequencies and can help determine the type of overload. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 53: View: State, Expansion Modules

    5.3 Explanation of WinCC faceplates 5.3.2 View: State, expansion modules Screen: State of CNX8600 4X expansion modules Screen: State of CNX8600 8X expansion modules SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 54 The output was switched off due to an error. Normal operation of the output Green SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 55: View: State, Buffer Modules

    5.3.3 View: State, buffer modules Screen: State of buffer module (100 ms/40 A and 300 ms/40 A) Figure 5-24 SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 56 Green, flashing Buffer component disa- Red, flashing bled FW-Update Red, flashing Charging State Amount of charge capacity remaining in the buffer module. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 57: View: State, Information

    Displays the product state of the PSU8600 main device. SW Version Displays the software version (firmware version) of the PSU8600 main device. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 58: View: Trends, Main Device

    The Trend type is “Cyclical real time” and starts at the start of HMI runtime. A legend for assigning colors to the individual outputs is located on the right side of the screen. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 59: View: Trends, Expansion Modules

    5.3 Explanation of WinCC faceplates 5.3.6 View: Trends, expansion modules Screen: Trends, CNX8600 4X expansion modules Screen: Trends, CNX8600 8X expansion modules SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 60: View: Alarms

    View: Alarms Screen: Alarms Figure 5-26 Elements ● Pending alarms Displays the currently pending alarms. ● Alarm history Displays the alarm's history. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 61: Integrating The Library Contents

    Click the “Browse” button, the “Browse” dialog box opens. Select the storage location of the library from the drop-down list and then click “OK”. The library opens. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 62: Integrating The Library Blocks Into Simatic Step 7

    – SITOP power supply (including the expansion modules) – Controller ● Network configuration – PROFINET connection between the controller and SITOP power supply SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 63 • In case the language setting of your project is German, then the entries IB (Input Byte) and IW (Input Word) of the sources have to be replaced with EB (EingangsByte) SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 64 Open text library "SITOP_MODULES" and make an entry to the text library with index as modules diagnostic address and PSU8600/UPS1600 device name under English/ German Language column as shown below. Save and close text library. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 65: Calling Blocks In Simatic Step 7

    Open your project and navigate to the "Blocks" folder. Right-click and select “Insert New Object > Data Block”. "Properties - Data Block" dialog box opens. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 66 "UDT_PSU8600_Data_V2” in the "Type" column. Name your tag. In this example, the tag name is “PSU”. • Delete the initial value. • Close the window. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 67 In the “Program elements” tab, open the “FB blocks” folder. Drag and drop the block “FB291 SITOP_PSU8600_V2 SITOP” into an empty network of “OB33”. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 68 Use the remaining blocks as required. Note Further information about the blocks is available in chapter 5.2, Explanation of SIMATIC STEP 7 blocks (Page 14). SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 69 SITOP_PSU8600_V2 (Page 15). Connect the remaining parameters as required. Save the changes in Main [OB33]. This completes the integration of the function blocks. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 70 If your communication blocks are called cyclically (example. in OB1), results in a slow behavior of the web server integrated in SITOP PSU8600 due to high communication load. If there aren’t any high demands regarding accurate time behavior, you can also call the communication blocks in a time-controlled block (example.
  • Page 71 Drag-and-drop "FB300 (SITOP_PSU8600_DIAG)" onto the empty network area and Interconnect FB300 with instance data block which is created previously. In this example, it is “DB3 PSU8600_Diag_DB”. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 72 100 alarms, new alarms will be discarded. • To know the diagnostic and input address of FB300, refer section Start/diagnostic (Page 46)address of the connected modules. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 73: Working With The Library In Wincc Flexible

    To use the faceplates in WinCC flexible 2008 SP3, the following requirements must be met. ● SITOP power supply (including the expansion modules) exists. ● The GSD file of SITOP PSU8600 is installed in SIMATIC STEP 7 V5.5 and the PSU is configured as PROFINET node in the Hardware (HW) configuration of the CPU.

  • Page 74: Opening The Library

    Open the WinCC flexible project into which you want to insert the faceplates. Open the “Library” menu in the "Tools" window. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 75 Open the drop-down list “Search in:” and navigate to the storage location of the library “PSU8600 V2-3 library WinCC flexible 2008” on your computer. Select the “PSU8600 V2-3 library WinCC flexible 2008.wlf” data and then click “Open”. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 76: Inserting Faceplates

    The connection name must be identical with the name of the connection you created for the configured con- nection to your controller. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 77 1. Select the faceplate. 2. Go to “Properties”. 3. Select “Dynamic Interface”. 4. Assign “PSU_Global” tag to “PSU_Data” property as shown in figure below. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 78 • “Object name” and select the “Alarm_window_PSU_history” tag. Select the “PSU_Global.PSU.AlarmPending” tag. In the "Properties" window, open “Events > Change value” folders. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 79 “Connection_1” is created automatically when inserting the tags into tag folder “PSU8600”. If you have already created a different connection, “Connection_1” must be deleted. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 80: Connecting Trends Of The Faceplates With Data Sources

    Open “Trends” folder that is inserted in step 3. Change the DB number in the "Address" column of all the tags to the “PSU_Global” DB number. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 81 Select 600 trend points in the "Samples" column for the trend representation. • Select "Trend type" as “Realtime Cyclic Triggered” for all trends. • SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 82 Select the trend colors in the “Foreground color” column for the individual outputs according to the legend. Assign the following colors so they match the legend of the faceplate. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 83 Data Source for additional trends: CNX8600 module1: CNX1_Output5_Trend_Current to CNX1_Output8_Trend_Current CNX8600 module2: CNX2_Output5_Trend_Current to CNX2_Output8_Trend_Current CNX8600 module3: CNX3_Output5_Trend_Current to CNX3_Output8_Trend_Current CNX8600 module4: CNX4_Output5_Trend_Current to CNX4_Output8_Trend_Current SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 84 Displaying the PROFINET diagnostic alarms In order to display the PROFINET diagnostic alarms of SITOP PSU8600 within the faceplate, the respective WinCC flexible project must have already been configured for the display of PROFINET diagnostic alarms.

  • Page 85: Working With The Library In Wincc V7.3

    To use the screen windows in WinCC V7.3, the following requirements must be met. ● The GSD file of SITOP PSU8600 is installed in SIMATIC STEP 7 V5.5 and the PSU is configured as PROFINET node in the HW configuration of the CPU.

  • Page 86: Opening The Library

    The screens are now present in WinCC V7.3 project. SITOP_8600.Pdl • SITOP_8600_MAIN.pdl • SITOP_8600_MSG.pdl • SITOP_8600_STANDARD.pdl • SITOP_8600_TREND.pdl • Symbol.PDL • SITOP_8600_ICON.fpt • SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 87: Inserting Hmi Tags

    Step Instruction number Save the folder “HMI Tag table (WinCC V7.3)” from the library on your hard disk. Open the WinCC project. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 88 “PSU8600 V2-3 library WinCC V7.3 > HMI Tag table (WinCC V7.3)”. Select “PSU8600_V2_3_UDT” and click “Import”. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 89 Select the “PSU_Global_Tags” tag and select a connection that is made between a PLC and an OS. Enter Global DB “PSU_Global” (DB15 in this case) address in the “Address” column. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 90: Inserting Screen Windows In A Wincc Project

    Open the project folder “Library” in your project directory. In this description, the path to project folder “Library” is: C:\Program Files\Siemens\Step7\S7Proj\Example\wincproj\OS(1)\Library. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 91 Insert the “library.pxl” library from the library folder “HMI Windows (WinCC V7.3)” into the 'Library” project folder and overwrite the existing “library.pxl” file. The screen windows are now included in your WinCC project in the project library. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 92 Open the screen in which you want to configure the screen windows. In this example, the screen name is “Startscreen.pdl”. In the "Library" window, select "Project library" folder. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...
  • Page 93 “StructureTag” then you should assign it with a period (.) (For example, <Structure tag name>.) to the "Tag Prefix". (In the image below it is “PSU_Global_Tags.”) SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

  • Page 94: Working With The Library In Wincc V7.4

    WinCC V7.3 (Page 85), except opening the folder PSU8600 V2-3 library WinCC V7.4 in place of PSU8600 V2-3 library WinCC V7.3. SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5 Function Manual, 11.2017, A5E37764016-06-76...

Table of Contents