hit counter script

Step 3: Preparing A Power Supply - Sony HVR-S270U Operating Manual

Digital video hd camera recorder
Hide thumbs Also See for HVR-S270U:
Table of Contents

Advertisement

Step 3: Preparing a power supply

The following power supplies are
recommended for your camcorder.
• BP-GL65/GL95/L60S/L80S Lithium-ion
Battery Pack
• AC power using the AC-550, AC-DN2,
AC-DN10 AC Adaptor
Using a battery pack
Approximate operating time (min.) when
you use a fully charged battery pack.
Model name
HDV
BP-GL65
240
BP-GL95
370
BP-L60S
215
BP-L80S
295
Before use, charge the battery pack with a
charger suitable for each battery.
• All times are measured under following
conditions.
– when recording on both tape and Memory
Recording Unit (HVR-MRC1)
– when using the microphone (ECM-XM1)
– when recording continuously
– when using the viewfinder with the LCD
panel closed
• For details on charging procedure, refer to the
battery charger operation manual.
b Notes
• A warm battery pack may not be able to be fully
recharged.
• Set [BATTERY TYPE] to display an accurate
battery life (p. 90).
To attach the battery pack
1 Press the battery pack against the back
of the camcorder, aligning the line on
the side of the battery pack with the
matching line on the camcorder.
2 Slide the battery pack down until its
DVCAM (DV)
255
385
230
310
To detach the battery pack
b Notes
• During recording, playback, and loading/
• Make sure to turn the camcorder off before
Back of the camcorder
"LOCK" arrow points at the matching
line on the camcorder.
unloading a tape, be careful never to remove the
battery pack.
changing the battery (except when using an AC-
550 and an AC-DN2/DN10 AC Adaptor
together).
Battery pack
Align these lines.
"LOCK" arrow
Line on the
camcorder
Holding the
button in, pull
the battery pack
up.
15
Continued ,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-s270n

Table of Contents