Step 2: Attaching the supplied items
Mounting the lens
Make sure to turn off the POWER switch of
your camcorder before mounting the lens.
Refer to the manuals provided with the lens
for details on the proper handling of the
lens.
Mounting the Carl Zeiss lens
1 Push the lens locking lever D up and
remove the lens or the lens mount cap
from the lens mount.
2 Align the center slot in the lens mount
with the center pin on the lens, and
insert the lens into the mount.
3 While holding the lens in place, push
the lens locking lever D down to
mount the lens.
b Notes
• If the lens is not properly locked, it may come
off when in use, which may cause a serious
problem. Make sure that the lens is securely
locked. Sony recommends that you set the lens
securing tab C as illustrated.
Mounting non-Carl Zeiss lens
1 Push the lens locking lever D up and
remove the lens or the lens mount cap
from the lens mount.
2 Align the center slot in the lens mount
with the center pin on the lens, and
insert the lens into the mount.
3 While holding the lens in place, push
the lens locking lever D down to
mount the lens.
4 Connect the lens cable to the LENS jack
A.
5 Push the lens cable in the cable holder
B.
b Notes
• You can mount a 1/3" lens directly on your
camcorder. You can mount a 1/2" lens via the
Fujinon ACM-19 or equivalent. You can mount
a 2/3" lens via the Fujinon ACM-17 or
equivalent.
• If the lens is not properly locked, it may come
off when in use, which may cause a serious
problem. Make sure that the lens is securely
locked. Sony recommends that you set the lens
securing tab C as illustrated.
• Press the REC START/STOP button on the
handle to record when using a lens that does not
have a lens cable.
z Tips
• When you attach a non-Carl Zeiss lens, Sony
recommends that you adjust the black balance
with the iris closed before recording. (p. 36)
Adjusting the flange focal length (for
Carl Zeiss lens)
You need to adjust the flange focal length
(the distance from the lens flange to the
plane of the image along the optical axis) in
the following cases.
• After you have changed lenses.
• When you cannot adjust focus properly during
zoom in or out.
z Tips
• Your camcorder can store flange focal length
data for ten different Carl Zeiss lenses (VCL-
412BWS/VCL-308BWS). If you remount the
lens after you have mounted ten different lenses
and adjusted their flange focal length, you need
to adjust the flange focal length for the lens even
for the Carl Zeiss lens whose flange focal length
has been adjusted.
9
Continued ,