Show Ip Eigrp Interfaces - Cisco Nexus 3548 Command Reference Manual
Nx-os unicast routing command reference
Hide thumbs
Also See for Nexus 3548:
- Command reference manual (247 pages) ,
- Configuration manual (230 pages) ,
- Installation manual (112 pages)
Table of Contents
Advertisement
show ip eigrp interfaces
show ip eigrp interfaces
To display information about interfaces configured for the Enhanced Interior Gateway Routing Protocol
(EIGRP), use the show ip eigrp interfaces command.
Syntax Description
instance-tag
ethernet slot/port
loopback if_number
port-channel number
vlan vlan-id
brief
vrf vrf-name
all
default
management
Command Default
This command shows all interfaces for the default VRF if no VRF or no interface is specified.
Command Modes
Any command mode
Command History
Release
5.0(3)A1(1)
Usage Guidelines
Use the show ip eigrp interfaces command to determine on which interfaces EIGRP is active and learn
information about EIGRP related to those interfaces.
If you specify an interface, only that interface is displayed. Otherwise, all interfaces on which EIGRP is
running are displayed.
If you specify an autonomous system, only the routing process for the specified autonomous system is
displayed. Otherwise, all EIGRP processes are displayed.
This command requires the LAN Enterprise Services license.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
460
show ip eigrp [instance-tag] interfaces [{ethernet slot/port | loopback if_number | port-channel
number | vlan vlan-id}] [brief] [vrf {vrf-name | all | default | management}]
EIGRP instance. The instance tag can be any case-sensitive, alphanumeric
string up to 20 characters.
Specifies the Ethernet interface and the slot number and port number. The
slot number is from 1 to 255, and the port number is from 1 to 128.
Specifies the loopback interface. The loopback interface number is from 0 to
1023.
Specifies the EtherChannel interface and EtherChannel number. The range
is from 1 to 4096.
Specifies the VLAN interface. The range is from 1 to 4094.
(Optional) Displays a brief summary of EIGRP interface information.
(Optional) Specifies the name of the virtual routing and forwarding (VRF)
instance. The vrf-name argument can be specified as any case-sensitive,
alphanumeric string up to 32 characters.
(Optional) Specifies all VRF instances.
(Optional) Specifies the default VRF.
(Optional) Specifies the management VRF.
Modification
This command was introduced.
Chapter
Unicast Routing Show Commands
OL-27852-01
Advertisement
Chapters
Table of Contents
