Table of Contents
Advertisement
NOTE
i
i
Important information about the product, product handling or a certain section of the documentation
which must be given particular attention.
Qualified Electrical Engineering Personnel
Only qualified electrical engineering personnel may commission and operate the equipment (module, device)
described in this document. Qualified electrical engineering personnel in the sense of this manual are people
who can demonstrate technical qualifications as electrical technicians. These persons may commission,
isolate, ground and label devices, systems and circuits according to the standards of safety engineering.
Proper Use
The equipment (device, module) may be used only for such applications as set out in the catalogs and the
technical description, and only in combination with third-party equipment recommended and approved by
Siemens.
Problem-free and safe operation of the product depends on the following:
•
Proper transport
•
Proper storage, setup and installation
•
Proper operation and maintenance
When electrical equipment is operated, hazardous voltages are inevitably present in certain parts. If proper
action is not taken, death, severe injury or property damage can result:
•
The equipment must be grounded at the grounding terminal before any connections are made.
•
All circuit components connected to the power supply may be subject to dangerous voltage.
•
Hazardous voltages may be present in equipment even after the supply voltage has been disconnected
(capacitors can still be charged).
•
Operation of equipment with exposed current-transformer circuits is prohibited. Before disconnecting the
equipment, ensure that the current-transformer circuits are short-circuited.
•
The limiting values stated in the document must not be exceeded. This must also be considered during
testing and commissioning.
Used Symbols
No.
Symbol
1
2
3
4
5
6
SICAM, Multifunctional Recorder, Manual
E50417-C1040-C606-A3, Edition 03.2017
Description
Direct current
IEC 60417-5031
Alternating current
IEC 60417-5032
Direct and alternating current
IEC 60417-5033
3-phase alternating current
Earth (ground) terminal
IEC 60417-5017
Protective conductor terminal
IEC 60417-5019
Preface
5
Hide quick links:
Advertisement
Table of Contents
