Tracking Measurements - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

The selection of the axis to be measured depends on the configuration.

Information on the configuration is provided in the following reference:

System Manual "Ctrl-Energy", SINUMERIK 840D sl / 828D

Tracking measurements

You have the option of graphically displaying the actual and saved measurement curves.

Precondition

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Press the "Start measurement" softkey.

The "Setting Measurement: Select Device" window opens.

Select the desired device in the list, possibly activate the "Measure part

program" checkbox, enter the number of repetitions, select the required

channel, and press the "OK" softkey.

The trace is started.

Press the "Stop measurement" softkey.

The measurement is terminated.

Press the "Save measurement" softkey to save the consumption values

of the actual measurement.

You have pressed the "Ctrl-E analyse" softkey and the "Ctrl-E analyse"

window has been opened.

Press the "Graphic" softkey.

The actual measurement is displayed as a blue measurement curve in

the "Ctrl-E analyse" window.

Press the "Saved measurements" softkey to display the measurements

In addition, measurement curves with 3 different colors paths are dis‐

played together with the measurement time.

Press the "Saved measurements" softkey again if you only want to see

the actual measurement.

19.2 Ctrl-E analysis