Advertisement
Quick Links
Handlebar Extension Kit
HoverPro 450/500/550
Model No. 02623
Safety
The handlebar extension kit provides additional length to the
handlebars, allowing for easier mowing on slopes and similar
terrain.
•
Before using this kit, refer to the HoverPro Operator's
Manual safety section.
•
Use care when maneuvering the machine. The longer
handle may make maneuvering more difficult.
•
Be careful when moving or storing the unit to prevent the
latching mechanism from breaking.
Installation
1. Remove the throttle control from the handlebar. Retain
the mounting fasteners (Figure 1). Loosen the throttle
control cable clamp on the engine, remove the outer
cable from the clamp, and remove the inner cable from
the lever (Figure 3).
2. Remove the 2 handwheels and the 2 U-bolts to
disasemble the HoverPro's upper handlebar from the
lower handlebar. Retain the handwheels and U-bolts.
3. Secure the handlebar extension to the lower handlebar
using 2 handwheels and 2 U-bolts (Figure 1).
© 2012—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Vibration
Measured vibration level for the left hand = 7.7 m/s
02602); 4.0 m/s
Measured vibration level for the right hand = 6.4 m/s
02602); 5.3 m/s
Uncertainty Value (K) = 3.5 m/s
(model 02604); 3.0 m/s
The vibration levels of model 02602 was measured to
standard EN14910. The vibration levels of models 02604 and
02606 were measured to standard EN836.
Register at www.Toro.com.
2
(model 02604); 6.8 m/s
2
(model 02604); 4.6 m/s
2
(model 02606).
1
5
3
2
Figure 1
1. Throttle control assembly
(1)
2. U-bolt (2)
3. Handwheel (2)
Original Instructions (EN)
All Rights Reserved *3371-527* B
Printed in the UK.
Form No. 3371-527 Rev B
Installation Instructions
2
2
(model 02606).
2
2
(model 02606).
2
(model 02602); 2.5 m/s
4
4. Handlebar extension (1)
5. Cable tie (3)
(model
(model
2
g018541
Advertisement
Related Manuals for Toro 02623
Summary of Contents for Toro 02623
- Page 1 Form No. 3371-527 Rev B Handlebar Extension Kit HoverPro 450/500/550 Model No. 02623 Installation Instructions Safety Vibration Measured vibration level for the left hand = 7.7 m/s (model The handlebar extension kit provides additional length to the 02602); 4.0 m/s (model 02604);...
- Page 2 4. Secure the upper handlebar to the handlebar extension 8. Push the lever to the full lock position (Figure 4). using the 2 handwheels and 2 U-bolts you removed in step 2 (Figure 1). 5. Use the mounting fasteners you removed in step 1 to secure the longer throttle control to the upper handlebar.