Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual page 196
Hide thumbs
Also See for SINUMERIK 808D ADVANCED Series:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Commissioning manual (508 pages)
Table of Contents
Advertisement
Alarm No.
Interface Address
700010
DB1600.DBX1.2
700011
DB1600.DBX1.3
700012
DB1600.DBX1.4
700013
DB1600.DBX1.5
700014
DB1600.DBX1.6
700015
DB1600.DBX1.7
700016
DB1600.DBX2.0
700017
DB1600.DBX2.1
700018
DB1600.DBX2.2
700019
DB1600.DBX2.3
700020
DB1600.DBX2.4
700021
DB1600.DBX2.5
700022
DB1600.DBX2.6
700023
DB1600.DBX2.7
700024
DB1600.DBX3.0
700025
DB1600.DBX3.1
700026
DB1600.DBX3.2
700028
DB1600.DBX3.4
700029
DB1600.DBX3.5
700030
DB1600.DBX3.6
700031
DB1600.DBX3.7
700032
DB1600.DBX4.0
700033
DB1600.DBX4.1
700034
DB1600.DBX4.2
700035
DB1600.DBX4.3
700036
DB1600.DBX4.4
700049
DB1600.DBX6.1
700050
DB1600.DBX6.2
700051
DB1600.DBX6.3
700052
DB1600.DBX6.4
700053
DB1600.DBX6.5
700054
DB1600.DBX6.6
700055
DB1600.DBX6.7
700056
DB1600.DBX7.0
700059
DB1600.DBX7.3
700060
DB1600.DBX7.4
700061
DB1600.DBX7.5
700062
DB1600.DBX7.6
196
Alarm Description
Handheld unit active
Tool clamping timeout
Spindle being braked
Operation not allowed: chuck unclamped
Gear stage change timeout
Gear position signal error
Drives not ready
Chuck operation not allowed: spindle/prog.
running
Cooling motor overload
Coolant level too low
Lubricating motor overload
Lubricant level too low
Turret motor overload
Prog. tool pos. number > max. tool pos. number
Max. tool position number illegal
No tool position signal from turret
Tool change timeout
Tool unclamped
Warning: the 1st maintenance task will expire
Alarm: the 1st maintenance task has expired
Magazine not in spindle pos. or original pos.
Magazine in spindle pos. and original pos.
Magazine rot. failed: magazine/spindle not
ready
Blk search finds tool on spindle <> tool pro-
grammed
Spindle positioning to unclamping position
timeout
Spindle positioning to clamping position timeout
Reference point of X axis not reached
Reference point of Z axis not reached
Spindle direction illegal
Monitoring time for JOG operation exceeded
Spindle override not 100%
Spindle not started
Feed override = 0%
Spindle dir. change not allowed in thread mach.
NC start not possible: safety door not closed
PRT/AFL change not possible: channel not
reset
Mgz. in maint. Read-in & rapid traverse disabled SBR60: Disk_MGZ_M
Tool on spindle <> tool prgd. mgz. must be
referenced
From SBR
SBR41: MINI_HHU
SBR53: Turret3_CODE_T
SBR42: SPINDLE
SBR56: Lock_unlock_T
SBR49: GearChg1_Auto
SBR33: EMG_STOP
SBR56: Lock_unlock_T
SBR44: COOLING
SBR45: LUBRICAT
SBR51: Turret1_HED_T
SBR52: Turret2_BIN_T
SBR53: Turret3_CODE_T
SBR53: Turret3_CODE_T
SBR48: ServPlan
SBR60: Disk_MGZ_M
SBR60: Disk_MGZ_M
SBR60: Disk_MGZ_M
SBR60: Disk_MGZ_M
SBR60: Disk_MGZ_M
SBR60: Disk_MGZ_M
SBR58: MM_MAIN
SBR58: MM_MAIN
SBR58: MM_MAIN
SBR58: MM_MAIN
SBR58: MM_MAIN
SBR58: MM_MAIN
SBR58: MM_MAIN
SBR58: MM_MAIN
SBR22:
AUX_SAFE_DOOR
SBR37: MCP_NCK
SBR60: Disk_MGZ_M
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
Advertisement
Table of Contents
