Safety Recommendations; Maintain Safety With Electricity - Cisco Threat Grid M5 Hardware Installation Manual

Hide thumbs Also See for Threat Grid M5:

Table of Contents

Installation Preparation

Warning

Statement 1040 Product Disposal

Ultimate disposal of this product should be handled according to all national laws and regulations.

Warning

Statement 1074 Comply with Local and National Electrical Codes

To reduce risk of electric shock or fire, installation of the equipment must comply with local and national

electrical codes.

Warning

Statement 19 TN Power Warning

The device is designed to work with TN power systems.

Safety Recommendations

Use the information in the following sections to help ensure your safety and to protect the chassis. This

information may not address all potentially hazardous situations in your working environment, so be alert and

exercise good judgment at all times.

Observe these safety guidelines:

• Keep the area clear and dust free before, during, and after installation.

• Keep tools away from walkways, where you and others might trip over them.

• Do not wear loose clothing or jewelry, such as earrings, bracelets, or chains that could get caught in the

• Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.

• Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.

• Never attempt to lift an object that is too heavy for one person.

Warning

Before working on a chassis, be sure the power cord is unplugged.

Be sure to read the REGULATORY & COMPLIANCE SAFETY INFORMATION document before installing

the Threat Grid chassis.

Follow these guidelines when working on equipment powered by electricity:

chassis.

Cisco Threat Grid M5 Hardware Installation Guide

Safety Recommendations

Table of Contents