Rear Panel Leds - Cisco Threat Grid M5 Hardware Installation Manual

Hide thumbs Also See for Threat Grid M5:

Table of Contents

Overview

Rear Panel LEDs

The following figure shows the rear panel LEDs and describes their states.

Figure 7: Rear Panel LEDs and Their States

SFP interface

Used for cluster interconnect (Clust)

10-Gigabit Ethernet SFP+ support

SFP-10G-SR and SFP-10G-LR are qualified for

use on the Threat Grid M5.

SFP interface

Not supported

100-Mbps/1-Gbps/10-Gbps Ethernet link (speed

on both LAN 1 and LAN 2):

• Off—Link speed is 100 Mbps.

• Amber—Link speed is 1 Gbps.

• Green—Link speed is 10 Gbps.

1-Gbps Ethernet dedicated management link:

• Off—Link speed is 10 Mbps.

• Amber—Link speed is 100 Gbps.

• Green—Link speed is 1 Gbps.

SFP interface

Not supported

Riser handle

Not supported

100-Mbps/1-Gbps/10-Gbps Ethernet link status

(speed on both LAN 1 and LAN 2):

• Off—No link is present.

• Green—Link is active.

• Green, flashing—Traffic is present on the

active link.

1-Gbps Ethernet dedicated management link:

• Off—No link is present.

• Amber—Link is active.

• Green, flashing—Traffic is present on the

active link.

Cisco Threat Grid M5 Hardware Installation Guide

Rear Panel LEDs

Table of Contents