Filler And Blank Cards - Cisco ONS 15454 Hardware Installation Manual

Hide thumbs Also See for ONS 15454:

Table of Contents

Installing the ONS 15454 M12 (ANSI and ETSI) Shelf

Filler and Blank Cards

The filler card (15454- FILLER) is designed to occupy empty multiservice and AIC-I slots in the Cisco ONS

15454 (Slots 1 to 6, 9, and 12 to17). The filler card cannot operate in the cross-connect (XC) slots (Slots 8

and 10) or TCC2/TCC2P/TCC3 slots (Slots 7 and 11). The filler card is detected by CTC.

When installed, the filler card aids in maintaining proper air flow and EMI requirements.

Do not use 15454-M-FILLER or 15454-M-T-FILLER filler cards in the Cisco ONS 15454 M12 shelf.

The following figure shows the card faceplate. The filler card has no card-level LED indicators.

Blank cards (15454-BLANK) can be installed in any empty slot in the shelf. CTC does not detect blank cards.

Cisco ONS 15454 Hardware Installation Guide