Table of Contents
Advertisement
Installing the Cisco ASR 907 Router
Step 5
Connect the other end of the ground wire to a suitable grounding point at your site.
Installing the Fan Tray
The fan tray is a modular unit that provides cooling to the Cisco ASR 907 Router.
Note
Do not introduce body parts or objects in the fan tray slot when installing or removing the fan tray module.
Exposed circuitry is an energy hazard.
Follow these steps to install the fan tray in the chassis:
Procedure
Step 1
Orient the fan tray so that the captive screws are on the left side of the fan tray's front panel. The figure below
shows how to orient the fan tray.
Figure 44: Installing the Fan Tray
Step 2
Guide the fan tray into the chassis until it is fully seated.
Caution
The fans are exposed on the left side of the fan tray. Keep your fingers, clothing, and jewelry away
from the fans. Always handle the fan tray by the handle.
Cisco ASR 907 Router Hardware Installation Guide
Installing the Fan Tray
69
Advertisement
Table of Contents
