Table of Contents
Advertisement
Using the Reset Cisco IMC to Defaults Header (J39, Pins 5 - 6)
Step 7
Return the server to main power mode by pressing the Power button on the front panel. The server is in main power
mode when the Power LED is green.
When you next log in to Cisco IMC, you see a message similar to the following:
Note
'CIMC reset to factory defaults' debug functionality is enabled.
On input power cycle, CIMC will be reset to factory defaults.
Step 8
To remove the jumper, press the Power button to shut down the server to standby power mode, and then remove AC
power cords from the server to remove all power.
Step 9
Remove the top cover from the server.
Step 10
Remove the jumper that you installed.
If you do not remove the jumper, the server will reset the Cisco IMC to the default settiings every time that
Note
you power cycle the server. The jumper has no effect if you reboot Cisco IMC.
Step 11
Replace the top cover, replace the server in the rack, replace power cords and any other cables, and then power on the
server by pressing the Power button.
Maintaining the Server
86
Maintaining the Server
- Quick Links:
- Rear Panel Leds
- Replacing Fan Modules
Hide quick links:
Advertisement
Table of Contents
