hit counter script
Sony XAV-AX200 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo Receiver
  5. XAV-AX200
  6. Service manual

Sony XAV-AX200 Service Manual

Hide thumbs Also See for XAV-AX200:
Table of Contents

Advertisement

Quick Links

2018/04/20 05:09:38 (GMT+09:00)
XAV-AX200/AX200C2
SERVICE MANUAL
Ver. 1.1 2018.03
(US, CND)
FOR THE CUSTOMERS IN THE USA. NOT
APPLICABLE IN CANADA, INCLUDING IN THE
PROVINCE OF QUEBEC.
POUR LES CLIENTS AUX ÉTATS-UNIS. NON
APPLICABLE AU CANADA, Y COMPRIS LA
PROVINCE DE QUÉBEC.
AUDIO POWER SPECIFICATIONS
CTA2006 Standard
Power Output: 20 Watts RMS × 4 at
4 Ohms < 1% THD+N
SN Ratio: 80 dBA (reference: 1 Watt into
4 Ohms)
Monitor section
Display type: Wide LCD color monitor
Dimensions: 6.4 in
System: TFT active matrix
Number of pixels:
1,152,000 pixels (800 × 3 (RGB) × 480)
Color system:
PAL/NTSC/SECAM/PAL-M automatic select for
CAMERA IN terminal
Tuner section
FM
(US, CND)
Tuning range: 87.5 MHz – 107.9 MHz
(AEP, UK, E17, IND)
Tuning range: 87.5 MHz – 108.0 MHz
(AUS, LA)
Tuning range:
87.5 MHz – 108.0 MHz (at 50 kHz step)
87.5 MHz – 108.0 MHz (at 100 kHz step)
87.5 MHz – 107.9 MHz (at 200 kHz step)
FM tuning step:
50 kHz/100 kHz/200 kHz switchable
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 150 kHz
Usable sensitivity: 10 dBf
Selectivity: 70 dB at 400 kHz
Signal-to-noise ratio: 70 dB (mono)
Separation at 1 kHz: 30 dB
Frequency response: 20 Hz – 15,000 Hz
9-896-430-02
2018C33-1
©
2018.03
AM
(US, CND)
Tuning range: 530 kHz – 1,710 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency:
9,267.5 kHz or 9,257.5 kHz/5 kHz
Sensitivity: 44 μV
(AEP, UK, E17, IND)
Tuning range: 531 kHz – 1,602 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency:
9,267 kHz or 9,258 kHz/4.5 kHz
Sensitivity: 44 μV
(AUS, LA)
Tuning range:
531 kHz – 1,602 kHz (at 9 kHz step)
530 kHz – 1,710 kHz (at 10 kHz step)
AM tuning step:
9 kHz/10 kHz switchable
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency:
9,267 kHz or 9,258 kHz/4.5 kHz (at 9 kHz step)
9,267.5 kHz or 9,257.5 kHz/5 kHz (at 10 kHz step)
Sensitivity: 44 μV
DVD/CD Player section
Signal-to-noise ratio: 80 dB
Frequency response: 20 Hz – 20,000 Hz
Wow and flutter: Below measurable limit
Harmonic distortion: 0.05%
Region code: Labeled on the bottom of the unit
USB player section
Interface: USB (High-speed)
Maximum current: 1.5 A
Sony Video & Sound Products Inc.
Photo: XAV-AX200
Model Name Using Similar Mechanism
Mechanism Type
SPECIFICATIONS
Wireless communication
Communication System:
BLUETOOTH Standard version 2.1
Output:
BLUETOOTH Standard Power Class 2
(Max. +4 dBm)
Maximum communication range*
Line of sight approx. 10 m (33 ft)
Frequency band:
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method: FHSS
Compatible BLUETOOTH Profiles*
A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (Audio Video Remote Control Profile) 1.5
HFP (Handsfree Profile) 1.6
PBAP (Phone Book Access Profile) 1.1
Corresponding codec: SBC (.sbc)
*1 The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a
microwave oven, static electricity, reception sensitivity,
antenna (aerial)'s performance, operating system,
software application, etc.
*2 BLUETOOTH standard profiles indicate the purpose of
BLUETOOTH communication between devices.
Power amplifier section
Outputs: Speaker outputs
Speaker impedance: 4
Maximum power output: 55 W × 4 (at 4 )
General
Outputs:
Audio output terminals (FRONT, REAR, SUB)
Power antenna (aerial)/Power amplifier control
terminal (REM OUT)
Inputs:
SiriusXM input terminal (US, CND only)
Illumination control terminal
Steering control input terminal
Antenna (aerial) input terminal
Microphone input terminal
Parking brake control terminal
Reverse input terminal
Camera input terminals
USB port
External input terminal
Canadian Model
AEP Model
Australian Model
Latin American Model
XAV-AX200/AX200C2
Power requirements: 12 V DC car battery
(negative ground (earth))
Rated current consumption: 10 A
Dimensions: Approx. 178 mm × 102 mm × 168 mm
(7
1
/
in × 4
1
/
8
8
Mounting dimensions:
Approx. 178 mm × 100 mm × 164 mm
1
:
(7
1
/
in × 4 in × 6
8
Mass: Approx. 1.7 kg (3 lb 12 oz)
Package contents:
Main unit (1)
Parts for installation and connections (1 set)
2
:
Remote Commander (1): RM-X170
(Except AEP, UK only)
Microphone (1)
Design and specifications are subject to change
without notice.
Region code
The region system is used to protect software
copyrights.
The region code is located on the bottom of the
unit, and only DVDs labeled with an identical region
code can be played on this unit.
DVDs labeled
– 8
If you try to play any other DVD, the message [Disc
playback prohibited by region code.] will appear on
the monitor screen. Depending on the DVD, no
region code may be labeled even though playing
the DVD is prohibited by area restrictions.
AV RECEIVER
US Model
UK Model
E Model
XAV-AX200
NEW
DL-C35D2
in) (w/h/d)
in × 6
5
/
8
1
/
in) (w/h/d)
2
can also be played.
SYS SET

Advertisement

Table of Contents
loading

Related Manuals for Sony XAV-AX200

Summary of Contents for Sony XAV-AX200

  • Page 1 Selectivity: 70 dB at 400 kHz USB port Signal-to-noise ratio: 70 dB (mono) External input terminal Separation at 1 kHz: 30 dB Frequency response: 20 Hz – 15,000 Hz AV RECEIVER 9-896-430-02 2018C33-1 Sony Video & Sound Products Inc. © 2018.03 SYS SET...
  • Page 2 THIS PRODUCT IS LICENSED UNDER THE AVC PATENT licensed from Fraunhofer IIS and Thomson. HTTP://WWW.MPEGLA.COM any use of such marks by Sony Corporation is under PORTFOLIO LICENSE AND VC-1 PATENT PORTFOLIO license. Other trademarks and trade names are THIS PRODUCT IS LICENSED UNDER THE AVC PATENT LICENSE FOR THE PERSONAL AND NON- those of their respective owners.

  • Page 3: Table Of Contents

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 TABLE OF CONTENTS SERVICING NOTES 5-18. Schematic Diagram ..........- TFT Board (2/8) (XAV-AX200) - ......... 41 5-19. Schematic Diagram GENERAL ..............11 - TFT Board (3/8) (XAV-AX200) - ......... 42 5-20. Schematic Diagram DISASSEMBLY - TFT Board (4/8) (XAV-AX200) - ......... 43 3-1.

  • Page 4: Servicing Notes

    Unleaded solder is more viscous (sticky, less prone to fl ow) MODEL IDENTIFICATION than ordinary solder so use caution not to let solder bridges The XAV-AX200 and XAV-AX200C2 can not be identifi ed by the occur such as on IC pins, etc. model name printed on the front panel top.
  • Page 5 2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 DESTINATION SETTING METHOD 3. Connect the power cord to the regulated DC power supply, and turn the power on this unit. When the MAIN board or U310 on the MAIN board is replaced, Note 2: It is not necessary to install the top cover and mechanism deck the destination setting is necessary.
  • Page 6 2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 9. Unsolder the shortland (SL001) on the MAIN board short- Operation method: circuited in step 2, and open the short-circuit. 1. Press the [ V ] or [ v ] button, and select the alphanumeric char- Note 4: Be sure to open the short-circuit of shortland (SL001).
  • Page 7 3166000615800021 – DEST: Destination Checking procedure: XAV-AX200: AEP, UK (EUR) 1. Refer to “Connection”, and connect the iPhone or Android XAV-AX200: US, CND (UC) phone to the main unit with USB cable. XAV-AX200: AUS, LA (LA) 2. Press the [HOME] button on the main unit, and touch the Ap- XAV-AX200C2: LA (LA) ple CarPlay icon or Android Auto icon.
  • Page 8 Picture check Sound check 7. Check that this unit restarts and the logo of “SONY” is dis- played on the screen, then turn the power off. (Displayed screen in the above fi gure are example) – Continued on next page –...
  • Page 9 Cancel Complete 6. Touch the [Complete] on the touch panel to end the calibration. 7. Check that this unit restarts and the logo of “SONY” is dis- Touch the [Complete] played on the screen, then turn the power off. Complete NOTE FOR SECURITY FUNCTION This unit does not use security function by password lock.
  • Page 10 2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 HOW TO EJECT THE DISC WHEN POWER IS TURNED OFF When the unit cannot be turned the power on for ejecting the disc, perform the following method. Note 1: Refer to “3. DISASSEMBLY” on page 19, remove the mechanism deck from the main unit.

  • Page 11: General

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 SECTION 2 This section is extracted GENERAL from instruction manual. (US, CND) Connection Connection/Installation Subwoofer* Cautions • Do not install this unit in a car that has no ACC position. The display of the unit does not turn off even after turning the ignition off, and this causes battery drain.
  • Page 12 • If airbags or any other shock-absorbing Speaker connection equipment are in your car, contact the store where Japanese cars. In such a case, consult your Sony • Before connecting the speakers, turn the unit off. dealer. you purchased this unit or the car dealer before •...
  • Page 13 2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 (AEP, UK) Connection Connection/Installation Subwoofer* Cautions • Run all ground (earth) leads to a common ground (earth) point. • Do not get the leads trapped under a screw or caught in moving parts (e.g., seat railing). • Before making connections, turn the car ignition Power amplifier* off to avoid short circuits.
  • Page 14 [Steering Control Custom] to You may not be able to install this unit in some make the registration (page 14). Japanese cars. In such a case, consult your Sony When the registration is complete, the steering dealer. wheel remote control becomes available.
  • Page 15 2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 (E17, IND) Connection Connection/Installation Subwoofer* Cautions • Run all ground (earth) leads to a common ground (earth) point. • Do not get the leads trapped under a screw or caught in moving parts (e.g., seat railing).
  • Page 16 • If airbags or any other shock-absorbing Speaker connection equipment are in your car, contact the store where Japanese cars. In such a case, consult your Sony • Before connecting the speakers, turn the unit off. dealer. you purchased this unit or the car dealer before •...
  • Page 17 2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 (AUS, LA) Connection Connection/Installation Subwoofer* Cautions • Run all ground (earth) leads to a common ground (earth) point. • Do not get the leads trapped under a screw or caught in moving parts (e.g., seat railing).
  • Page 18 You may not be able to install this unit in some Installation of the rear view camera (not supplied) is power will always be supplied to the memory Japanese cars. In such a case, consult your Sony required before use. circuit even when the ignition switch is turned off.

  • Page 19: Disassembly

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW Note: Due to the structure of the unit, you cannot stably place it on flat surfaces. Stabilize the unit by placing a stand, etc. under it that is suitable for your work.

  • Page 20: Dvd Deck Assy

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 3-3. DVD DECK ASSY 2 Lift up the DVD deck assy 1 two screws in the direction of the arrow. 4 FFC (35 pin) (PTT2.6 5 DVD deck assy 3 Unlock the connector. (CCON2) terminal side – Bottom view –...

  • Page 21: Front Panel Block, Chassis Block

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 3-5. FRONT PANEL BLOCK, CHASSIS BLOCK 2 Draw the FFC (20 pin) out of the connector. terminal side Note: When installing the FFC (60 pin), align the position 1 Unlock the connector. of the boundary line of the blue area and the white line (CON102) on the MAIN board.

  • Page 22: Main Board

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 3-6. MAIN BOARD Note 1: When the MAIN board is replaced, be sure to refer the following, and perform them. • DESTINATION SETTING METHOD (page 5) • COMMUNICATION CHECK OF Apple CarPlay OR Android Auto (page 7) • FLICKER ADJUSTMENT (page 25)

  • Page 23: Knob Assy

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 3-8. KNOB ASSY Align the D-shaped parts of the rotary encoder and knob assy and insert. top side knob assy rotary encoder rear side 1 knob assy front panel block front side 3-9. DISC GUIDE ASSY top side...

  • Page 24: 3-10. Tft Board

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 3-10. TFT BOARD Note 1: Replaced old TFT board is destroyed with Note 2: When the TFT board is replaced, be sure to refer the following, and perform them. the hammer, and throw out it. • COMMUNICATION CHECK OF Apple CarPlay OR Android Auto (page 7) •...

  • Page 25: 3-11. Bt Antenna, Tft (6.4), Touch Panel

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 SECTION 4 ELECTRICAL ADJUSTMENT 5. Press the [VOL +] or [VOL −] button on the remote command- 3-11. BT ANTENNA, TFT (6.4), TOUCH PANEL MONITOR SECTION er to adjust so that the fl icker becomes minimum in the sight.

  • Page 26: Diagrams

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 SECTION 5 DIAGRAMS 5-1. BLOCK DIAGRAM - OVERALL Section (XAV-AX200) - iPod CVBS chip Camera1 in X4: 27MHz TOUCH CVBS DRGB24bit + H/V/CLK Camera 2 in Y1: 26MHz CVBS Camera3 in UART CVBS CDT-BTB8880 -00 Video out TFT PWB (in 4 Layers)

  • Page 27: Block Diagram - Power Supply Section (Xav-Ax200)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 5-2. BLOCK DIAGRAM - POWER SUPPLY Section (XAV-AX200) - Power Input Main PWB TFT PWB POWER ANTENNA REAR USB TDA7703 5V,1.5A NJM2816 7805_5V V U104 U101 BD00C0 P-AMP 8.5V NJU4558 PURE5001H URE5001 1117-ADJ ML86V7675 1.5V 1.5V FLT-USB FLT USB...

  • Page 28: Block Diagram - Overall Section (Xav-Ax200C2)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 5-3. BLOCK DIAGRAM - OVERALL Section (XAV-AX200C2) - CVBS X4: 27MHz Camera1 in TOUCH CVBS DRGB24bit + H/V/CLK Camera 2 in Y1: 26MHz CVBS Camera3 in UART CVBS SPHE888 Video out REAR USB TFT PWB (in 4 Layers)

  • Page 29: Block Diagram - Power Supply Section (Xav-Ax200C2)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 5-4. BLOCK DIAGRAM - POWER SUPPLY Section (XAV-AX200C2) - Power Input Main PWB TFT PWB POWER ANTENNA REAR USB TDA7703 5V,1.5A NJM2816 7805_5V V U104 U101 BD00C0 P-AMP 8.5V NJU4558 PURE5001H URE5001 1117 -ADJ ML86V7675 1.5V 1.5V...

  • Page 30: Printed Wiring Board - Sxm Board (Us, Cnd)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. 5-5. PRINTED WIRING BOARD - SXM Board (US, CND) - • See the left for Circuit Boards Location. (In addition to this, the necessary note is printed in each block.) •...

  • Page 31: Printed Wiring Board - Tuner Board

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 5-7. PRINTED WIRING BOARD - TUNER Board - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. TUNER BOARD TUNER BOARD (SIDE A) (SIDE B) 5-8. SCHEMATIC DIAGRAM - TUNER Board -...

  • Page 32: Printed Wiring Board - Servo Board

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 5-9. PRINTED WIRING BOARD - SERVO Board - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. SERVO BOARD SERVO BOARD (SIDE A) (SIDE B) XAV-AX200/AX200C2 SYS SET...

  • Page 33: 5-10. Schematic Diagram - Servo Board

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 5-10. SCHEMATIC DIAGRAM - SERVO Board - SERVO BOARD XAV-AX200/AX200C2 SYS SET...

  • Page 34: Printed Wiring Board - Main Board (Side A)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 5-11. PRINTED WIRING BOARD - MAIN Board (Side A) - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. MAIN BOARD (SIDE A) Note: When the U310 on the MAIN board is replaced, be sure to refer the “DESTINATION SETTING METHOD”...

  • Page 35: Printed Wiring Board - Main Board (Side B)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 5-12. PRINTED WIRING BOARD - MAIN Board (Side B) - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. MAIN BOARD (SIDE B) XAV-AX200/AX200C2 SYS SET...

  • Page 36: Schematic Diagram - Main Board (1/3)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 5-13. SCHEMATIC DIAGRAM - MAIN Board (1/3) - MAIN BOARD (1/3) XAV-AX200/AX200C2 SYS SET...

  • Page 37: Schematic Diagram - Main Board (2/3)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 5-14. SCHEMATIC DIAGRAM - MAIN Board (2/3) - • See page 56 for IC Pin Function Description. MAIN BOARD (2/3) Note: When the U310 on the MAIN board is replaced, be sure to refer the “DESTINATION SETTING METHOD” on page 5, and perform it.

  • Page 38: Schematic Diagram - Main Board (3/3)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 5-15. SCHEMATIC DIAGRAM - MAIN Board (3/3) - MAIN BOARD (3/3) XAV-AX200/AX200C2 SYS SET...

  • Page 39: 5-16. Printed Wiring Board - Tft Board

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 5-16. PRINTED WIRING BOARD - TFT Board - • See page 30 for Circuit Boards Location. • : Uses unleaded solder. TFT BOARD (SIDE A) TFT BOARD (SIDE B) XAV-AX200/AX200C2 SYS SET...

  • Page 40: Schematic Diagram

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 5-17. SCHEMATIC DIAGRAM - TFT Board (1/8) (XAV-AX200) - TFT BOARD (1/8) [1,2,8] R122 PWR_3V3 MCU_SCL R111 [1,2] VLED+ MCU_SDA DVDD_3V3 R261 MCU_SCL ML86_SCL VLED- [2,6,8] TFT_6V 0.1R AK_SCL R208 TFT_VS R207 MCU_SDA ML86_SDA TFT_HS VCOM_3V8 R265 R119...

  • Page 41: Schematic Diagram - Tft Board (2/8) (Xav-Ax200)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 5-18. SCHEMATIC DIAGRAM - TFT Board (2/8) (XAV-AX200) - TFT BOARD (2/8) [6,7] AK_VDD_3V3 TFT VGL & VGH & AVDD_10V4 C157 C153 C161 C160 BAV99 C349 10uF 10uF TP10 ASP_GND VGH_16V VGL_-7V 1117-3.3A 560R C143 ASP_GND C149 HL_GND...

  • Page 42: Tft Board (3/8) (Xav-Ax200)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 5-19. SCHEMATIC DIAGRAM - TFT Board (3/8) (XAV-AX200) - TFT BOARD (3/8) [3,5,6,7] [3,5,6,7] CORE_3V3 3.3uH TP14 CORE_3V3 CORE_1V1 PWR_1V1 FB17 TPS_5V VIN1 [3,4] R206 75K_1% AVDD33 [3,4,5] 10uH VIN2 BST1 USB0VDD33 10K/1% C342 C341 C340 C339 C338...

  • Page 43: Tft Board (4/8) (Xav-Ax200)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 5-20. SCHEMATIC DIAGRAM - TFT Board (4/8) (XAV-AX200) - TFT BOARD (4/8) RN11 A_RMD4 DDR_D4 [3,4] [3,4] DDR_1V5 DDR_1V5 A_RMD6 DDR_D6 R238 A_RMA0 A_A0 A_D0 A_RMD0 A_RMD2 DDR_D2 R236 A_A1 A_D1 A_RMA1 A_RMD1 R226 DDR_D0 A_RMD0 A_RMA2 A_A2...

  • Page 44: Schematic Diagram - Tft Board (5/8) (Xav-Ax200)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 5-21. SCHEMATIC DIAGRAM - TFT Board (5/8) (XAV-AX200) - TFT BOARD (5/8) R305 CORE_3V3 Debug C364 [3,5,6,7] C146 C145 CON10 R300 [5] NF_R/B1 15pF 15pF R308 100R R301 [5] NF_/RE C365 R302 32MHz 100R [5] NF_/CE0 R307 4Pin-2.0...

  • Page 45: Tft Board (6/8) (Xav-Ax200)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 5-22. SCHEMATIC DIAGRAM - TFT Board (6/8) (XAV-AX200) - TFT BOARD (6/8) C361 C362 AA21 DP_R[0] DP_R[0] C363 AB13 I2C0_SCL SCL0/GPIO[22] DP_R[1] DP_R[1] ASP_GND AA13 AB15 I2C0_SDA SDA0/GPIO[23] R2/LVDS_TXB0 DP_R[2] AA15 CORE_MUTE R3LVDS_TX0 DP_R[3] AB16 R4/LVDS_TXB1 DP_R[4] ASP_GND...

  • Page 46: Tft Board (7/8) (Xav-Ax200)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 5-23. SCHEMATIC DIAGRAM - TFT Board (7/8) (XAV-AX200) - TFT BOARD (7/8) C243 AOUT_L0 C232 AIN_L0 ADAC_VLPC0L C215 AIN_R0 AOUT_R0 C220 C387 C386 AIN_L1 ADAC_VLPC0R AUOUT_L1 DISC_DET AIN_R1 C229 SRV_5V AIN_L2 AOUT_L1 C235 AIN_R2 ADAC_VLPC1L C225 AIN_L3 AOUT_R1...

  • Page 47: Tft Board (8/8) (Xav-Ax200)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 5-24. SCHEMATIC DIAGRAM - TFT Board (8/8) (XAV-AX200) - TFT BOARD (8/8) PWR_3V3 L24 5.6nH 0.5P GPIO55 [1,2,6] R130 R131 TFT_6V C392 CON9 DLW21SZ900HQ2L C128 330R FAULT USB_FLT USB_CTL VOADJ CONT ESDA-ULP ESDA-ULP VOUT FM_ANT R152 2U2F TP35...

  • Page 48: Tft Board (1/8) (Xav-Ax200C2)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 5-25. SCHEMATIC DIAGRAM - TFT Board (1/8) (XAV-AX200C2) - TFT BOARD (1/8) [1,2,8] R122 PWR_3V3 MCU_SCL R111 VLED+ [1,2] CON7 MCU_SDA DVDD_3V3 R261 MCU_SCL ML86_SCL VLED- TFT_6V [2,6,8] R208 0.1R AK_SCL TFT_VS R207 MCU_SDA ML86_SDA TFT_HS...

  • Page 49: Tft Board (2/8) (Xav-Ax200C2)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 5-26. SCHEMATIC DIAGRAM - TFT Board (2/8) (XAV-AX200C2) - TFT BOARD (2/8) [1,2,6,8] TFT_6V [6,7] AK_VDD_3V3 T F T V G L & V G H & A V D D _ 1 0 V 4...

  • Page 50: Tft Board (3/8) (Xav-Ax200C2)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 5-27. SCHEMATIC DIAGRAM - TFT Board (3/8) (XAV-AX200C2) - TFT BOARD (3/8) [3,5,6,7] [3,5,6,7] CORE_3V3 L9 3.3uH TP14 CORE_3V3 CORE_1V1 PWR_1V1 TPS_5V FB17 [3,4] VIN1 R206 75K_1% AVDD33 [3,4,5] 10uH VIN2 BST1 USB0VDD33 47nF 10K/1% FB60R...

  • Page 51: Tft Board (4/8) (Xav-Ax200C2)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 5-28. SCHEMATIC DIAGRAM - TFT Board (4/8) (XAV-AX200C2) - TFT BOARD (4/8) RN11 A_RMD4 DDR_D4 [3,4] [3,4] U1-A DDR_D6 DDR_1V5 DDR_1V5 A_RMD6 R238 A_RMA0 A_A0 A_D0 A_RMD0 R236 A_RMD2 DDR_D2 A_RMA1 A_A1 A_D1 A_RMD1 R226 A_RMD0...

  • Page 52: Schematic Diagram - Tft Board (5/8) (Xav-Ax200C2)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 5-29. SCHEMATIC DIAGRAM - TFT Board (5/8) (XAV-AX200C2) - TFT BOARD (5/8) R305 CORE_3V3 D ebug C146 C145 CON10 C364 [3,5,6,7] R300 [5] NF_R/B1 R308 100R 15pF 15pF R301 [5] NF_/RE R307 C365 100R R302 32MHz...

  • Page 53: Tft Board (6/8) (Xav-Ax200C2)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 5-30. SCHEMATIC DIAGRAM - TFT Board (6/8) (XAV-AX200C2) - TFT BOARD (6/8) C361 mode 30h (write) C362 U1-B AA21 31h (read) DP_R[0] DP_R[0] AB13 C363 I2C0_SCL SCL0/GPIO[22] DP_R[1] DP_R[1] ASP_GND AA13 AB15 I2C0_SDA SDA0/GPIO[23] R2/LVDS_TXB0 DP_R[2]...

  • Page 54: Tft Board (7/8) (Xav-Ax200C2)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 5-31. SCHEMATIC DIAGRAM - TFT Board (7/8) (XAV-AX200C2) - TFT BOARD (7/8) U1-C C243 AOUT_L0 C232 AIN_L0 ADAC_VLPC0L 22uF C215 AIN_R0 AOUT_R0 CON8 C220 AIN_L1 ADAC_VLPC0R C387 C386 AUOUT_L1 DISC_DET AIN_R1 SRV_12V C229 AIN_L2 AOUT_L1 C235...

  • Page 55: Tft Board (8/8) (Xav-Ax200C2)

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 5-32. SCHEMATIC DIAGRAM - TFT Board (8/8) (XAV-AX200C2) - TFT BOARD (8/8) PWR_3V3 TP37 C133 0.5P 5.6nH GPIO5 [55] [1,2,6] R130 TFT_6V R131 CON9 C129 DLW21SZ900HQ2L 5PIN/2.0MM NJM2816 C128 330R FAULT USB_FLT VOADJ CONT USB_CTL 1N4148...
  • Page 56 2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 • IC Pin Function Description Pin No. Pin Name Description Data communication terminal PE1 (T)/I2C_SCL MAIN BOARD U310 STM8S207RB (ST) (SYSTEM CONTROLLER) (AX200: US, CND, AEP, UK, E17, AUS, LA) (for Tuner (TDA7703R), DSP (AK7602) and Video decode (ML86V7675))

  • Page 57: Exploded Views

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 SECTION 6 EXPLODED VIEWS Note: • -XX and -X mean standardized parts, so • The mechanical parts with no reference The components identifi ed by mark 0 they may have some difference from the number in the exploded views are not sup- or dotted line with mark 0 are critical for original one.

  • Page 58: Chassis Section

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 6-2. CHASSIS SECTION FAN1 USB1 FFC2 (AX200: US, CND) board MAIN board TUNER board FFC1 not supplied not supplied Note: When the complete MAIN board (Ref. No. 51) is replaced, be sure to refer the following, and perform them.

  • Page 59: Front Panel Section

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 6-3. FRONT PANEL SECTION front side not supplied not supplied TFT board TPN1 not supplied LCD1 not supplied FFC3 rear side not supplied Note 1: Replaced old complete TFT board (Ref. No. 104) is destroyed Note 3: When the TFT (6.4) (Ref. No. LCD1) is replaced, refer to with the hammer, and throw out it.

  • Page 60: Electrical Parts List

    2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 SECTION 7 MAIN SERVO ELECTRICAL PARTS LIST TUNER Note: • Due to standardization, replacements in • CAPACITORS When indicating parts by reference num- uF: μF the parts list may be different from the ber, please include the board name.
  • Page 61 2018/04/20 05:09:38 (GMT+09:00) XAV-AX200/AX200C2 Ver. 1.1 Ref. No. Part No. Description Remark ACCESSORIES ************ (AX200: AEP, UK, AUS, LA/AX200C2) 4-723-407-12 OPERATING INSTRUCTION (ENGLISH, FRENCH, SPANISH) (AX200: US, CND) 4-723-407-22 OPERATING INSTRUCTION (ENGLISH, SPANISH) (AX200: AUS, LA) 4-723-407-32 OPERATING INSTRUCTION (ENGLISH) (AX200: E17)
  • Page 62 XAV-AX200/AX200C2 REVISION HISTORY Ver. Date Description of Revision 2017.08 2018.03 Addition of IND model (XAV-AX200) Addition of XAV-AX200C2 Change of printed wiring board Change of Part No. for OPERATING INSTRUCTION (XAV-AX200: US, CND, AEP, UK, E17, AUS, LA) (SMR-17048) SYS SET...

This manual is also suitable for:

Xav-ax200c2

Table of Contents