Page 1 Satellite ® Series User’s Guide If you need assistance: ❖ Toshiba’s Support Web site pcsupport.toshiba.com ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 176 in this guide.
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port port and microphone jack.
Page 4: Industry Canada Requirement
Contact either: ❖ Toshiba’s Support Web site at pcsupport.toshiba.com. ❖ Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Wireless Lan And Your Health
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. In normal operating configuration, the LCD in the upright position, the distance between the antenna and the user should not be less than 20 cm.
Page 9 documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population;...
Page 10 EU Declaration of Conformity TOSHIBA declares, that this product conforms to the following Standards: This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm 8, 41460 Neuss, Germany. VCCI Class B Information...
Page 11 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 12: Device Authorization
The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048...
Page 13: Radio Approvals For Wireless Devices
The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only. Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer.
Page 14 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 15 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Lichtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK...
Page 16 ❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 17 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 18: Bluetooth Wireless Technology Interoperability
Bluetooth Wireless Technology Interoperability ® Bluetooth Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖ Bluetooth Specification as defined and approved by The Bluetooth Special Interest Group.
Page 19: Bluetooth Wireless Technology And Your Health
Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.
Page 20: Regulatory Statements
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 21 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 22 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048 Direct Dial: 03-3457-4850...
Page 23 Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 24 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 25 TouchPad is a trademark of Synaptics, Inc. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 26: Table Of Contents
Keeping yourself comfortable ...40 Precautions...40 Important information on your computer’s Setting up your computer ...43 Setting up your software...44 Registering your computer with Toshiba ...45 Adding external devices ...46 Connecting to a power source ...47 Using the main battery...50 cooling fan ...43...
Page 27 Using the computer for the first time ...51 Opening the display panel ...51 Your computer’s features and specifications ...52 Turning on the power ...52 Adding memory (optional) ...53 Installing a memory module ...54 Removing a memory module...59 Using the Dual Mode Pad ...61 Scrolling with the Dual Mode Pad ...62 Using the Control buttons ...63 Using Tap Zones ...63...
Page 28 Removing a disc with the computer on...98 Removing a disc with the computer off ...99 Caring for CD or DVD Discs ...99 Toshiba’s online resources ...100 Chapter 3: Mobile Computing...101 Toshiba’s energy-saver design...101 Running the computer on battery power ...101 Battery Notice ...102...
Page 29 Charging batteries...104 Charging the main battery...104 Charging the RTC battery...105 Monitoring main battery power...106 Determining remaining main battery power ...108 What to do when the main battery runs low ...109 Setting battery alarms...110 Conserving battery power ...111 Power Schemes ...112 Using a hot key to set the Power Scheme...113 Changing the main battery ...113 Removing the battery from the computer ...114...
Page 30 TOSHIBA Assist ...144 Connect...145 Secure...145 Protect & Fix ...146 Optimize...147 TOSHIBA SD™ Memory Card Format Utility ...148 Setting passwords ...149 Using an instant password...149 Using a supervisor or user password ...150 TOSHIBA Password Utility ...152 PC Diagnostic Tool Utility ...154 TOSHIBA Hotkey Utility ...155...
Page 31 TOSHIBA Accessibility ...162 Fingerprint Authentication Utility...163 Fingerprint Enrollment ...163 Fingerprint Logon ...165 Power-on Security ...165 Control Center...167 Fingerprint utility limitations ...169 Password Bank ...169 Care and maintenance of your fingerprint Fingerprint sensor limitations ...175 Chapter 6: If Something Goes Wrong ...176 Problems that are easy to fix ...176...
Page 32 Develop good computing habits ...209 Data and system configuration backup in If you need further assistance...216 Before you contact Toshiba ...216 Contacting Toshiba ...217 Other Toshiba Internet Web sites ...218 Toshiba’s worldwide offices...218 Appendix A: Hot Keys...220 Volume Mute ...220 Password security ...221 Without a password ...221...
Page 33 Appendix C: Using ConfigFree™ with your Toshiba Computer... 230 Getting Started...231 Starting ConfigFree ...231 ConfigFree Utilities...233 Connectivity Doctor ...233 Search for Wireless Devices ...236 Profile Settings ...241 ConfigFree SUMMIT...245 Quick Connect...249 Using the Automatic Switch...252 Semi-Automatic Switch Feature ...252 Glossary... 254 Index...
Page 34: Introduction
2002/95/EC, Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its notebook component suppliers to meet RoHS requirementsand verifies its suppliers’ commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process.
Page 35: This Guide
Toshiba's Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/ component/options availability are all subject to change without notice.
Page 36: Safety Icons
Introduction Safety icons ❖ Skim through and stop when a topic interests you. ❖ Use the table of contents and the index to find specific information. Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data.
Page 37: Other Icons Used
Your computer comes with the following documentation: ❖ An electronic version of the user’s guide ❖ It may also contain guides for other programs that may come with your system. For accessory information, visit Toshiba's Web site at accessories.toshiba.com. Introduction Other documentation...
Page 38: Service Options
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see Something Goes Wrong” on page 176. “If...
Page 39: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 40: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. ❖ Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 41 Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately: 1.
Page 42: Important Information On Your Computer's Cooling Fan
Getting Started Selecting a place to work Information on disks is stored magnetically. Placing a magnet too close to a disk can erase important files. Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its center hole and edge. If you handle the disc incorrectly, you could damage the disc and possibly lose data.
Page 43: Setting Up Your Computer
Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Standby mode). In this condition, observe the following: Never cover your computer or AC adaptor with any object.
Page 44: Setting Up Your Software
Getting Started Setting up your computer To register your computer online or to sign up for an Internet account, you must either connect the built-in modem to a telephone line or establish a Local Area Network (LAN) connection. See on page 126.
Page 45: Registering Your Computer With Toshiba
If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba Web site at register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.
Page 46: Adding External Devices
Getting Started Adding external devices Adding external devices NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See software” on page After starting your computer for the first time you may want ❖ Add more memory (see page 53).
Page 47: Connecting To A Power Source
Toshiba Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by Toshiba to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury.
Page 48 Getting Started Connecting to a power source AC adaptor Power cord/cable (Sample Illustration) Power cord/cable and AC adaptor To connect AC power to the computer: Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects...
Page 49 (Sample Illustration) Connecting the AC adaptor to the computer Connect the power cord/cable to a live electrical outlet. The AC power light on the indicator panel glows blue. Never attempt to connect or disconnect a power plug with wet hands. Failure to follow this instruction could result in an electric shock, possibly resulting in serious injury.
Page 50: Using The Main Battery
Getting Started Using the main battery ❖ Flashes amber when the main battery charge is low and it is time to recharge the main battery or plug in the AC adaptor NOTE If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving correct input from the AC power supply.
Page 51: Using The Computer For The First Time
Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel Slide the display latch to the right. Lift the display panel. (Sample Illustration) Opening the display panel To avoid damaging the display panel, do not force it beyond the point where it moves easily, and never lift the computer by the display panel.
Page 52: Your Computer's Features And Specifications
Getting Started Using the computer for the first time Your computer’s features and specifications Certain notebook chassis are designed to accommodate all possible configurations for an entire product Series. Your select model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
Page 53: Adding Memory (Optional)
Adding memory (optional) HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit accessories.toshiba.com. Your computer comes with enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process large amounts of data.
Page 54: Installing A Memory Module
Getting Started Adding memory (optional) NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See software” on page Installing a memory module Additional memory modules can be installed in the memory module slots on the base of the computer. You will need a standard Phillips screwdriver for this procedure.
Page 55 If the computer is on, begin at step 1; otherwise, skip to step Click Start, and then Turn off or Shut Down (depending on the system). The Turn off computer or Shut Down window appears. Click Turn Off or Shut Down. The operating system turns off the computer.
Page 56 Getting Started Adding memory (optional) (Sample Illustration) Unscrewing the memory module slot cover Remove the memory slot cover. Place the screws and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 57 If no memory slot is available, you must remove a module by NOTE performing steps page Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connector’s notch with the matching key in the socket.
Page 58 Getting Started Adding memory (optional) corresponding cutouts in the side of the module. If the latches and cutouts do not line up correctly, repeat steps 12-13. latch (Sample Illustration) Pressing down on the memory module Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place.
Page 59: Removing A Memory Module
Replace the memory module slot cover and secure it using the screws. Re-insert the main battery. For more information on inserting the main battery, see battery” on page Turn the computer right side up. Reconnect the cables. Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work.
Page 60 Getting Started Adding memory (optional) Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module. Do not remove the memory module while the computer is in Standby or Hibernation mode. The computer could hang up the next time you turn it on and data in memory will be lost.
Page 61: Using The Dual Mode Pad
Replace the memory module slot cover and tighten the screws. Re-insert the main battery. For more information on inserting the main battery, see battery” on page Turn the computer right side up. Reconnect the cables. Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work.
Page 62: Scrolling With The Dual Mode Pad
Getting Started Using the Dual Mode Pad ❖ To move the cursor to the top of the page, push your finger forward on the Dual Mode Pad. ❖ To move the cursor to the bottom of the page, drag your finger toward yourself.
Page 63: Using The Control Buttons
The scrolling and coasting features can be disabled or changed in the Mouse Properties dialog box. Using the Control buttons When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary (left-hand) button.
Page 64 Getting Started Using the Dual Mode Pad Virtual buttons Virtual buttons (Sample Illustration) Virtual buttons on the Dual Mode Pad The virtual buttons at the top of the Dual Mode Pad have the following default settings: ❖ Left button: Opens the default email application ❖...
Page 65: Disabling Or Enabling The Dual Mode Pad
Disabling or enabling the Dual Mode Pad The Dual Mode Pad is enabled by default. To change the Dual Mode Pad setting: Click Start, Control Panel. The Control Panel window appears. Click Printers and Other Hardware. Click Mouse Properties. The Mouse Properties window appears. Click the TouchPad ON/OFF tab.
Page 66: Directing The Display Output When You Turn On The Computer
Getting Started Using external display devices ❖ A standard television, projector, or VCR/DVD recorder/ player via the S-video Out port. ❖ A projector or a monitor via the DVI video port (DVI video port is available on some models). DVI stands for Digital Visual Interface, and is a standard for NOTE connecting computers to digital monitors.
Page 67 While holding down setting you want takes effect. Briefly pause between pressing the key to allow time for the display to change. This hot key cycles through the settings in the following order: ❖ Built-in display only ❖ Built-in display and external monitor simultaneously ❖...
Page 68: Adjusting The Quality Of The External Display
Getting Started Using an external keyboard Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps.
Page 69: Connecting A Printer
Connecting a printer Your printer documentation may require you to install the printer NOTE software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly. Read the documentation that came with your printer.
Page 70: Setting Up Your Printer
Getting Started Connecting a printer Setting up your printer Some printers require a specific installation process. Refer to NOTE your printer installation guide for instructions before completing the following procedure. If your printer does not support Plug and Play, follow these steps to set it up for the first time.
Page 71: Connecting An Optional External Diskette Drive
Getting Started Connecting an optional external diskette drive Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5- inch diskettes. (Sample Illustration) Optional external USB diskette drive To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports.
Page 72: Turning Off The Computer
Getting Started Turning off the computer Turning off the computer Pressing the power button before shutting down the Windows work. Make sure the system indicator panel’s disk light and the drive-in-use light are off. If you turn off the power while a disk is being accessed, you may lose data or damage the disk and/ or drive.
Page 73: Hibernation Mode
❖ If you have work in progress and are not connected to a network, use the Windows commands to save your system settings so that when you turn on the computer again, you will automatically return to where you left off. TECHNICAL NOTE: Before using any of these options to shut down or turn off your computer, save your files and make sure the disk activity lights are off.
Page 74: Standby Mode
Getting Started Turning off the computer For information on placing your computer into, and configuring your computer for Hibernation mode, see and configuring Hibernation mode” on page Standby mode The Standby command places the computer into a power- saving mode. Standby holds the current state of the computer in system memory (RAM) so that, when you restart the computer, you can continue working from where you left off.
Page 75: Using The Turn Off Computer Or Shut Down Commands
Using the Turn Off Computer or Shut Down commands Depending on the operating system installed, use the following steps to turn off your computer. Turn Off For Windows domain server, follow these steps to turn off the computer: Click Start, select Turn off computer. The Turn off computer dialog box appears.
Page 76: Using And Configuring Hibernation Mode
Getting Started Turning off the computer Restarting your computer To start the computer up again, press the power button until the on/off light glows blue. If you turn off the computer by closing the display panel, you can start it again by opening the display panel. Using and configuring Hibernation mode To turn off the computer using the Hibernation command, click Start, Turn off computer, and select Hibernate.
Page 77: Using And Configuring Standby Mode
Getting Started Turning off the computer Once the computer is configured, you can place it into Hibernation mode by either pressing the power button or closing the display panel, depending on the Hibernation options set. Starting again from Hibernation mode To start up the computer from Hibernation mode, press the power button until the on/off light glows blue.
Page 78: Closing The Display Panel
Getting Started Caring for your computer Configuring Standby mode options You can place the computer into Standby mode by either pressing the power button or closing the display panel. You can also specify an amount of time after which the computer automatically goes into Standby mode.
Page 79: Cleaning The Computer
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock. visit accessories.toshiba.com. (Sample Illustration) Computer lock cable Getting Started...
Page 80 Getting Started Caring for your computer To secure the computer: Wrap the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. Pass the locking end through the loop. Insert the cable’s locking end into the security lock slot on the back of your computer, then engage the locking device.
Page 81: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 82 Learning the Basics Computing tips ❖ Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 83: Using The Keyboard
Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows the functionality of a full-size keyboard. (Sample Illustration) Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖...
Page 84: Function Keys
Used in combination with the specific functions on the computer. For example, off the Dual Mode Pad. For more information, see “TOSHIBA Hotkey Utility” on page page 220. Windows special keys (Sample Illustration) Windows special keys Your computer’s keyboard has two keys that have special...
Page 85: Starting A Program
Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows If you prefer to open the program first, you have four options. You can: ❖...
Page 86: Starting A Program From Windows Explorer
Learning the Basics Starting a program If a program is not listed in the All Programs menu, you can start it from Windows gives you a view of your computer’s contents as a hierarchy or “tree.” You can easily see the content of each drive and folder on your computer.
Page 87: Starting A Program From The Run Dialog Box
Windows Files folder on the right side of the window. The left side of the window shows all the folders contained within the Program Files folder. In the left part of the window, click Windows NT. Click Accessories. Windows Accessories folder on the right side of the window. In the right part of the window, double-click WordPad.
Page 88: Saving Your Work
Learning the Basics Saving your work ❖ If you do not know the program’s location, you can search for it by clicking Start, and then Search. When the Search screen displays, follow the displayed instructions. Type WordPad in the Open text box and press HINT: To run the same program again, click the arrow to the right of the text box and select the command line from the drop-down list.
Page 89: File Names
Use this dialog box to specify where to store the document and to give it a file name. (Sample Illustration) Save As dialog box Choose the drive and folder where you want your file to be stored. Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 90: Printing Your Work
Learning the Basics Printing your work Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft Word saves files with a .doc extension. Any file name with an extension of “.doc”...
Page 91: Backing Up Your Work
The program displays a Print dialog box. (Sample Illustration) Print dialog box Specify the print parameters. For example, the range of pages and number of copies to print. Click Print. Backing up your work Back up all the files you create in case something happens to your computer.
Page 92: Restoring Your Work
Learning the Basics Using the Optical Drive Restoring your work To restore information from your backup media to your hard disk, use the Restore page in the backup program. Look in the online Help or your operating system documentation for information on restoring files.
Page 93: Optical Drive Drive Components
For optimum DVD performance, it is recommended that you NOTE play DVDs while running the computer on AC power. Optical Drive components The Optical Drive is located on the right side of the computer. Your Optical Drive may look like this: Drive in-use indicator light Eject button Manual eject hole...
Page 94: Inserting A Compact Disc
Learning the Basics Using the Optical Drive Manual eject hole—Use if you need to release the disc tray when the power is off. Use a straightened paper clip or other narrow object to press the manual eject button located inside the hole.
Page 95 If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 96: Playing An Audio Cd
Learning the Basics Using the Optical Drive Playing an audio CD Insert an audio CD and close the disc tray. If the computer is turned on, Windows Media and the CD begins to play. You can use the Windows Media Player program to control the CD.
Page 97: Playing Cds Using Auto-Run
❖ To stop the CD, click the Stop button. Before putting on headphones to listen to an audio CD, turn the volume dial down. Do not set the volume too high when using the headphones. Continuous exposure to loud sound can harm your hearing.
Page 98: Removing A Disc With The Computer On
These problems are not due to any defect in your Toshiba computer or optical drive. Please refer to your computer's product specification for listing of specific format compatibilities.
Page 99: Removing A Disc With The Computer Off
Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject hole. The disc tray slides partially out of the drive (about 1 inch). Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.
Page 100: Toshiba's Online Resources
Let the disc dry completely before inserting it in the drive. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 101: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 102: Battery Notice
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. See "Detailed Specs" for specific battery measurement test. Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power.
Page 103: Power Management
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries In addition to the main battery, you may also have an optional second battery (not included with your computer).
Page 104: Charging Batteries
Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Always use the battery charger specified by Toshiba. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com.
Page 105: Charging The Rtc Battery
The main battery may not start charging immediately under the following conditions: ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius).
Page 106: Monitoring Main Battery Power
Mobile Computing Monitoring main battery power The above error message may vary by computer model. NOTE The RTC battery does not charge while the computer is turned off even when the AC adaptor is charging the computer. The RTC battery charges when the computer is powered on.
Page 107 ❖ Is unlit when the battery has discharged, the battery is not charging, or the AC adaptor is not plugged into the computer or AC outlet. Battery life and charge time may vary, depending upon power NOTE management settings, applications and features used. ❖...
Page 108: Determining Remaining Main Battery Power
Mobile Computing Monitoring main battery power Power button (Sample Illustration) Power and main battery light locations Determining remaining main battery power Wait at least 16 seconds after turning on the computer before NOTE trying to monitor the remaining battery power. The computer needs this time to check the battery’s remaining capacity and perform its calculations.
Page 109: What To Do When The Main Battery Runs Low
The value displays as a percentage of remaining battery charge. (Sample Illustration) Power Meter tab of Power Options Properties TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.
Page 110: Setting Battery Alarms
Mobile Computing Monitoring main battery power ❖ Connect the computer to an optional high capacity battery (if available for your computer) ❖ Save your work and turn off the computer If you do not manage to do any of these things before the main battery completely runs out of power, the computer automatically enters Hibernation mode and turns itself off.
Page 111: Conserving Battery Power
The Power Options Properties window appears. Click the Alarms tab and set the alarm as desired. (Sample Illustration) Alarms tab in Power Options Properties Conserving battery power How long a fully charged battery pack lasts when you are using the computer depends on a number of factors, such as: ❖...
Page 112: Power Schemes
Mobile Computing Monitoring main battery power These power-saving options control the way in which the computer is configured. By using them, you can greatly increase the length of time you can use the computer before you need to recharge the battery. These options are combined into preset power schemes that let you choose between maximum power savings and peak system performance.
Page 113: Using A Hot Key To Set The Power Scheme
You can configure your computer’s power usage using the drop down lists. You can choose one of the provided power schemes or select your own custom settings. For more information, see your Windows documentation. Using a hot key to set the Power Scheme You may use a hot key to set the power scheme.
Page 114: Removing The Battery From The Computer
Mobile Computing Changing the main battery When your main battery has run out of power, you have two options: plug in the AC adaptor or install a fresh main battery. TECHNICAL NOTE: To avoid losing any data, save your files and then either completely shut down your computer, or put it into Hibernation mode before changing the main battery.
Page 115: Inserting A Charged Battery
If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock.
Page 116: Taking Care Of Your Battery
Mobile Computing Taking care of your battery (Sample Illustration) Inserting the battery Turn the computer right side up. Reconnect any cables that were removed in step 3 of “Removing the battery from the computer” on page Restart the computer. Taking care of your battery The following sections offer tips on how to take care of your battery and prolong its life.
Page 117: Maximizing Battery Life
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. ❖ A reverse polarity condition should be avoided with all batteries.
Page 118: Disposing Of Used Batteries
Mobile Computing Disposing of used batteries there is some other warning to indicate a low battery, go to step 4. Connect the AC adaptor to the computer and the power cord/cable to a power outlet. The DC-IN or AC power-light should glow blue, and the battery light should glow amber to indicate that the battery pack is being charged.
Page 119 If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777. Toshiba is dedicated to preserving the environment by sponsoring Call2Recycle, a program of Rechargeable Battery Recycling Corporation. For more information and for drop- off locations, visit www.rbrc.org...
Page 120: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information.
Page 121: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in the Windows start programs, find documents, set up system components, and perform most other computing tasks.
Page 122: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, system tray, and background pattern. Icons Start button (Sample Illustration) Windows Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 123 TECHNICAL NOTE: If you delete a file from a diskette, it does not go into the Recycle Bin. For more information on the Recycle Bin, see Windows online Help. Internet Explorer — The Microsoft access to the Internet. If you place the cursor over an icon, a popup description of the NOTE file contents appears.
Page 124: Setting Up For Communications
Exploring Your Computer’s Features Setting up for communications Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 125 Exploring Your Computer’s Features Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings.
Page 126: Connecting The Modem To A Telephone Line
Exploring Your Computer’s Features Setting up for communications Click OK to close the properties dialog box for that specific modem. Click OK to close the Modem Properties dialog box. Close the Control Panel. Connecting the modem to a telephone line Before you can communicate using the modem, you need to connect it to a telephone line.
Page 127: Connecting Your Computer To A Network
Now you are ready to send a fax or use the modem to connect to an online service or the Internet. For more detailed information regarding your computer’s modem, visit Toshiba’s Web site at accessories.toshiba.com. Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports.
Page 128 Exploring Your Computer’s Features Setting up for communications Setting up the connection To set up an office connection, consult your network administrator for network settings and additional considerations. To set up a dial-up connection, use the New Connection Wizard: Click Start, All Programs, Accessories, Communications, and then New Connection Wizard.
Page 129: An Overview Of Using The Internet
To enable the Ethernet LAN port, repeat steps one through four. Select the Use this device (enable) check box, and click Using Wireless LAN Connectivity Wireless connectivity and some features may require you to NOTE purchase additional software, external hardware or services. Availability of public wireless LAN access points may be limited.
Page 130: The Internet
Exploring Your Computer’s Features An overview of using the Internet ❖ The World Wide Web ❖ Internet Service Providers ❖ Connecting to the Internet ❖ Surfing the Internet ❖ Internet features ❖ Uploading to, and downloading files from, the Internet The Internet The Internet is an association of thousands of networks and millions of computers around the world connected by...
Page 131: Surfing The Internet
You can connect to the Internet by using a telephone and modem or through other higher-speed communication methods such as Digital Subscriber Lines (DSL), cable, and satellite links. Connecting to the Internet To connect to the Internet, you need: ❖ A modem and telephone line, or a LAN connection ❖...
Page 132: Internet Features
Exploring Your Computer’s Features An overview of using the Internet To visit a desired Web site, type in the Web address. The Web address, or Uniform Resource Locator (URL), is a unique identifier for that computer system linked to the Internet. Web addresses can also appear within a Web page’s text, and are known as links.
Page 133: Uploading To, And Downloading Files From, The Internet
Uploading to, and downloading files from, the Internet Transferring files from one computer to another is termed uploading (transferring data from your computer to a site on the Web), or downloading (transferring data from a site on the Web to your computer). There are several ways to upload or download data.
Page 134 Exploring Your Computer’s Features Exploring audio features Positioning (Sample Illustration) Sound Recorder screen Click the Record button. Speak normally into the microphone. When you have finished recording, click the Stop button. The Sound Recorder window displays the new sound file as a waveform.
Page 135: Using External Speakers Or Headphones
Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect an external audio device to one of the jacks on the front of the computer. These jacks and the types of audio devices they support are: ❖...
Page 136: Using The I.link ® Port
Exploring Your Computer’s Features Using the i.LINK® port To play back sound files through external speakers or headphones: Locate the headphone or audio out jack on the front of the computer. Using any necessary adaptors, plug the cable from the headphones or external speakers into the jack.
Page 137: Inserting A Pc Card
TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up and use. Inserting a PC Card Before you insert a PC Card, refer to the documentation that comes with the card to see if you need to do anything before...
Page 138: Removing A Pc Card
Exploring Your Computer’s Features Using PC Cards Removing a PC Card Prepare the card for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove. If the system is unable to prepare the card for safe removal, a message will tell you to try again later.
Page 139: Using An Expresscard
Using an ExpressCard™ The ExpressCard slot supports the use of ExpressCard media. The slot also supports hot swapping, which allows you to replace one ExpressCard with another while the computer is Inserting an ExpressCard Before you insert an ExpressCard, refer to the documentation that comes with the card to see if you need to do anything before you insert it.
Page 140: Removing An Expresscard
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot Removing an ExpressCard Prepare the card for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove. If the system is unable to prepare the card for safe removal, a message will tell you to try again later.
Page 141: Inserting Memory Media
NOTE Do not use the Copy Disk function for this type of media. To copy data from one media to another, use the drag-and-drop feature of Windows. Inserting memory media The following instructions apply to all media devices. Turn the media so that the contacts (metal areas) are face down.
Page 142 Exploring Your Computer’s Features Using the Bridge Media Adapter Slot The card pops out slightly. Grasp the card and pull it straight out. (Sample Illustration) Removing a memory media card Do not remove memory media while data is being written or read.
Page 143: Chapter 5: Toshiba Utilities
Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options, or change default options. This chapter describes the utilities supplied by Toshiba: ❖ TOSHIBA Assist ❖...
Page 144: Toshiba Assist
TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, do one of the following: ❖ Double-click the TOSHIBA Assist shortcut icon on the desktop.
Page 145: Connect
❖ ConfigFree™ ❖ ConfigFree ❖ Bluetooth ❖ Bluetooth Local COM Settings (available on some models) (Sample Illustration) TOSHIBA Assist – Connect tab Secure The features available in this category are: ❖ User password ❖ Supervisor password ❖ TOSHIBA Password Utility...
Page 146: Protect & Fix
TOSHIBA Assist (Sample Illustration) TOSHIBA Assist window – Secure tab Protect & Fix The feature available in this category is: ❖ PC Diagnostic Tool Utility (Sample Illustration) TOSHIBA Assist window – Protect & Fix tab...
Page 147: Optimize
The features available in this category are: ❖ TOSHIBA SD™ Memory Card Format Utility ❖ Mouse Utility ❖ TOSHIBA Accessibility ❖ TOSHIBA Zooming Utility ❖ CD/DVD Drive Acoustic Silencer ❖ TOSHIBA Hardware Setup (Sample Illustration) TOSHIBA Assist window – Optimize tab TOSHIBA Assist...
Page 148: Toshiba Sd™ Memory Card Format Utility
This utility is used to format SD cards used with the Bridge Media Adapter Slot. To format an SD memory card using this utility: Click Start, All Programs, Toshiba, Utilities, SD Memory Card Format utility, or double-click the SD Memory Card icon in the Optimize tab of TOSHIBA Assist.
Page 149: Setting Passwords
When you set a password, you must enter the password before you can work on your computer again. Toshiba supports several types of passwords on your computer: ❖ An instant password—Secures your open programs and files when leaving the computer temporarily (the user password supports this function).
Page 150: Using A Supervisor Or User Password
Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer.
Page 151 Type the correct password. Click OK. Setting a user password If you choose to set a user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer.
Page 152: Toshiba Password Utility
Select the User Password icon. Select Not Registered. Type the correct password. Click OK. TOSHIBA Password Utility The TOSHIBA Password Utility allows you to set a user- level password in TOSHIBA Assist or in System Setup. To use the TOSHIBA Password utility: Start TOSHIBA Click the Secure tab, then double-click the User Password icon.
Page 153 Click OK to exit. If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it.
Page 154: Pc Diagnostic Tool Utility
Refer to the online help documentation within the application for additional help. To use the PC Diagnostic Tool utility: Click Start, All Programs, Toshiba, Utilities, then PC Diagnostic Tool, or double-click the PC Diagnostic Tool icon in the Protect & Fix tab of The PC Diagnostic Tool window appears.
Page 155: Toshiba Hotkey Utility
TOSHIBA Hotkey Utility The TOSHIBA Hotkey utility allows you to receive a confirmation message when you use the Hotkey combination for Standby [ To activate the Hotkey utility: Click Start, All Programs, Toshiba, Utilities, Hotkey utility, or double-click the Hotkey icon in the Optimize tab TOSHIBA The Toshiba Hotkey window appears.
Page 156: Mouse Utility
To access the Mouse utility: Click Start, Control Panel, Mouse, or double-click the Mouse icon in the Optimize tab of TOSHIBA Assist. The Mouse Properties screen appears. (Sample Illustration) Mouse Properties screen The settings you can change are divided into these categories: ❖...
Page 157: Toshiba Hardware Setup
The TOSHIBA HW Setup screen appears. (Sample Illustration) TOSHIBA HW Setup screen – General tab options The TOSHIBA HW Setup screen has the following tabs: ❖ General—Allows you to view the current BIOS version or change certain settings back to their default values ❖...
Page 158 TOSHIBA Hardware Setup ❖ Display—Allows you to change various default settings for the built-in LCD display When the computer restarts, it remembers the last NOTE configuration. If data does not appear on the display you are using after starting in Standby Mode, press Fn + F5.
Page 159: Toshiba Zooming Utility
Adobe ❖ Icons on the desktop To access the Zooming utility: Click Start, All Programs, Toshiba, Utilities, TOSHIBA Zooming Utility, or double-click the Zooming Utility icon in the Optimize tab of The TOSHIBA Zooming Utility Properties screen appears. (Sample Illustration) TOSHIBA Zooming Utility Properties...
Page 160: Cd/Dvd Drive Acoustic Silencer
The zoom in and zoom out hot keys will now work with the applications you selected. To zoom in, hold down the hold down the For more information about how to use the TOSHIBA Zooming utility, right click the then click Help. CD/DVD Drive Acoustic Silencer This utility can slow the speed of your optical drive to make it run more quietly.
Page 161 The CD/DVD Drive Acoustic Silencer screen appears. Click Set Quiet Mode to make the drive run more slowly and quietly, for listening to music or audio files on a CD. Click Set Normal Mode to run the drive at normal speed, for transferring data. TOSHIBA Assist.
Page 162: Toshiba Accessibility
TOSHIBA Accessibility TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the a sticky key, meaning you can press it once, release it, and then press a function key to activate the hot key function.
Page 163: Fingerprint Authentication Utility
Toshiba does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.
Page 164 Fingerprint Authentication Utility Click the button above the finger you want to enroll. Swipe your finger on the sensor. A sample will be created and indicated by a Fingerprint icon. Repeat the previous step. Swipe the same finger on the sensor two more times to create two more samples.
Page 165: Fingerprint Logon
❖ Error reading fingerprint—the movement was skewed. Swipe your finger again in a straight line. ❖ Error reading fingerprint—the movement was too fast. Swipe your finger again at a slower speed. ❖ Error reading fingerprint—the movement was too short. Swipe your finger again using a longer motion. Fingerprint Logon The fingerprint utility enables logon to your computer using fingerprints.
Page 166 Fingerprint Authentication Utility Enabling Power-on Security Options for power-on security are displayed only if your computer supports this feature. In most configurations, power-on security is enabled automatically after the first user fingerprints are enrolled. To disable/enable power-on security: Open the Control Center and go to Settings - Power-on Security.
Page 167: Control Center
Fingerprint Management Fingerprints are stored in memory during enrollment. After a fingerprint is enrolled, it is displayed with a power-on button above it. The button appears “pressed in” by default, indicating that the corresponding finger will be used for power-on security. If you do not want to use a fingerprint for power-on security but only for logon, click the Boot button to delete the fingerprint from the fingerprint device memory.
Page 168 Fingerprint Authentication Utility Settings ❖ System Settings—Opens the Settings dialog containing various options for setting up the product. Most of these settings can be modified only by administrators and affect all users. ❖ User Settings—Opens the User Settings dialog containing user-specific options for setting up the product.
Page 169: Fingerprint Utility Limitations
Password Bank The Password Bank stores registration and logon information for Web sites and dialogs, helping to automate the task of entering this information. You enter the required information only once, during Web site or dialog registration. When the window is displayed again, all the data is entered automatically when you scan your fingerprint on the sensor.
Page 170 Fingerprint Authentication Utility Registering a new Web page or dialog You are logged on to the computer and want to register a new Web page. To create a new registration: Display a Web page you want to register. Fill in the data you want to replay the next time you access this Web page.
Page 171 Fingerprint Authentication Utility Replaying registrations with multiple forms Password Bank registers forms, not pages. If a page contains several forms, each form requires a separate registration. If a page contains several forms, replaying works as follows: ❖ If only one form is registered for the page (regardless of how many forms the page has), that registration is replayed.
Page 172 Select a registration. Click Delete. How to Delete the Fingerprint Data Fingerprint data is stored in the non-volatile memory. If the computer changes ownership, Toshiba recommends the following procedure: Click Start, All Programs, Protector Suite QL then click Control Center.
Page 173: Care And Maintenance Of Your Fingerprint Sensor
If other fingerprint data is still displayed on the list, hold down the are all selected, then click Remove. Click OK to make the changes permanent. Check that all Fingerprint data was deleted on the Fingerprint Storage Inspector screen. Care and maintenance of your fingerprint sensor Failure to follow these guidelines and/or procedures might result in (1) damage to the sensor or cause sensor failure, (2) finger recognition problems, or lower finger recognition...
Page 174 Fingerprint Authentication Utility ❖ Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate. ❖ Soaked or swollen finger (e.g. after taking bath) ❖ Injured finger ❖...
Page 175: Fingerprint Sensor Limitations
Toshiba does not guarantee that the fingerprint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.
Page 176: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 177 Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
Page 178: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer To record the details: Click the Details button and select the text the operating system displays. The Details button displays information that the software manufacturer needs to help you solve your problem. Press Ctrl clipboard.
Page 179 Problems when you turn on the computer The computer starts but when you press a key nothing happens. Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text and try typing again.
Page 180: The Windows Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working If you are running on battery power, it is recommended that you do not leave the computer in Standby mode for long periods of time. To charge the battery, leave the computer plugged into a live wall outlet for several hours.
Page 181: Using Startup Options To Fix Problems
The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.
Page 182: Internet Problems
If Something Goes Wrong The Windows® operating system is not working Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, telephone line conditions, time of day (when everyone else is surfing, your access can be slow) and popularity of the sites you are trying to access.
Page 183: Resolving A Hardware Conflict
The device most recently connected to the system is the one most likely to be causing a hardware conflict. If Something Goes Wrong Resolving a hardware conflict pcsupport.toshiba.com Help and Support to troubleshoot the problem...
Page 184: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works.
Page 185: Fixing A Problem With Device Manager
If you install an older (legacy) device that the operating system cannot recognize, the operating system may have difficulty assigning resources to it. As a result, a hardware conflict can occur. Resolving conflicts There are several things you can do to resolve hardware conflicts: ❖...
Page 186 If Something Goes Wrong Resolving a hardware conflict Disabling a device Click Start, Control Panel, then click Performance and Maintenance. Click the Administrative Tools icon. Double-click Computer Management, then click Device Manager. Select the specific device from the device category. To expand a device category, double-click the category.
Page 187: Memory Problems
The operating system displays the Device Properties dialog box, which provides an array of tabs. They may include: ❖ The General tab, which provides basic information about the device. ❖ The Resource tab, which lists resources assigned to the monitor, optional external Optical Drive, optional external diskette drive, and other power-using functions.
Page 188: Power And The Batteries
If Something Goes Wrong Resolving a hardware conflict Reinstall the memory module, following the instructions “Installing a memory module” on page sure the module is seated properly. Check for the error again. If the error recurs, remove the memory module entirely and check for the error again.
Page 189 The AC adaptor and power cord/cable work correctly, but the battery will not charge. The battery does not charge while the computer is consuming full power. Try turning off the computer. The battery may not be inserted correctly in the computer. Turn off the computer, remove the battery, clean the contacts with a soft dry cloth (if necessary) and replace the battery.
Page 190: Keyboard Problems
This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. current on the most recent software and hardware options for your computer, and for other product information.
Page 191: Display Problems
Nothing happens when you press the keys on the external keyboard. You may have plugged the external keyboard in while the computer was turned on. Click Start, Shut Down or Turn off computer, and Restart the computer using the Dual Mode Pad on the internal keyboard.
Page 192 If Something Goes Wrong Resolving a hardware conflict ❖ Try adjusting the contrast and brightness controls on the external monitor. ❖ Press priority is not set for the built-in screen. The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties.
Page 193: Disk Drive Problems
Click OK. The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode.
Page 194 If Something Goes Wrong Resolving a hardware conflict Error-checking Run Error-checking, which analyzes the directories, files and File Allocation Table (FAT) on the disk and repairs any damage it finds: To run Error-checking: Click Start, then click My Computer. Right-click the drive you want to check. On the pop-up menu, click Properties.
Page 195 Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software. Consult your network administrator. Some programs run correctly but others do not. This is probably a configuration problem.
Page 196: Optical Drive Problems
If Something Goes Wrong Resolving a hardware conflict Optical Drive problems You cannot access a disc in the drive. If the Optical Drive is an external drive, make sure that the drive’s cable is properly connected to the computer. Make sure the tray which holds the CD-ROM or DVD-ROM is closed properly.
Page 197: Sound System Problems
Some discs run correctly but others do not. Check the type of disc you are using. The CD-RW/ DVD-ROM or multi-function drive supports the Digital Versatile Disc (DVD) formats DVD-ROM, DVD-R (read- only), plus CD-ROM, CD-R (read-only), and CD-RW (read- only).
Page 198 If Something Goes Wrong Resolving a hardware conflict Most PC Card problems occur during installation and setup of new cards. If you are having trouble getting one or more of these devices to work together, several sections in this chapter may apply.
Page 199 Resolving PC Card problems Here are some common problems and their solutions: The slot appears to be dead. PC Cards that used to work no longer work. Check the PC Card status: Click Start. Click My Computer icon with the secondary button, then click Properties.
Page 200 If Something Goes Wrong Resolving a hardware conflict Hot swapping (removing one PC Card and inserting another without turning the computer off) fails. Follow this procedure before you remove a PC Card: Double-click the Safely Remove Hardware icon on the System tray.
Page 201: Printer Problems
Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray.
Page 202: Modem Problems
The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system's V.92 modem, visit the Toshiba Web site at 125. pcsupport.toshiba.com...
Page 203: Wireless Networking Problems
To determine if your computer has an internal Wi-Fi adapter, NOTE check the device list in Device Manager (part of the Windows Control Panel). Some Toshiba models may have a Wi-Fi antenna switch even though they do not have an internal Wi-Fi adapter.
Page 204 If Something Goes Wrong Resolving a hardware conflict ❖ Check Control Panel's Device Manager to verify that the Wi-Fi adapter is recognized by Windows driver is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technician at a later time.
Page 205 ❖ Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). ❖ Click Start, then click Run... ❖ Enter Cmd and press Enter. ❖ Enter PING 192.168.1.1 at the command prompt, and press Enter.
Page 206: Dvd Operating Problems
If Something Goes Wrong DVD operating problems The Windows XP wireless management facility does not work. If you are using an external Wi-Fi adapter (a PC Card, USB adapter, or other variety), check if the adapter comes with its own management utility. If it does, the utility may be disabling the Windows XP wireless management facility, in which case you must use the adapter's management utility.
Page 207 “Checking device properties” on page 186 instructions on using Device Manager to view the DVD- ROM properties. Check the Toshiba Web site for new information on Optical Drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 208 If Something Goes Wrong DVD operating problems Click OK. DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion. To disable Stretch, follow the instructions below: Right-click the Desktop, select Properties.
Page 209: Develop Good Computing Habits
Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See “Computing tips”...
Page 210: Data And System Configuration Backup In Windows Xp
If Something Goes Wrong Develop good computing habits Your local computer store or book store sells a variety of self- help books you can use to supplement the information in the manuals. Data and system configuration backup in Windows XP Windows XP offers some easy-to-use features for backing up your Windows settings and your data –...
Page 211 Windows creates the Restore Point and automatically stamps it with the current date and time. Then, at a later time, you can re-establish your Windows configuration using the saved Restore Point. To do this: Click Start. Click Help and Support. Under Pick a Task, click Undo changes to your computer with System Restore.
Page 212 CDs, a relatively high-capacity storage media. No additional software is required. Most of the CD and DVD drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from CDs.
Page 213 NOTE Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: ❖...
Page 214 If Something Goes Wrong Develop good computing habits Favorites (bookmarks) for Internet Explorer and other Web browsers Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): In Internet Explorer, click File, Import and Export. The Import/Export Wizard will appear.
Page 215 General tips for installing hardware and software Here are a few tips to help insure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office or utility software such as special toolbars for your web browser).
Page 216: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: ❖ Review the troubleshooting information in your operating system documentation.
Page 217: Contacting Toshiba
Go to the Tech Support Center, select your particular model from the list and go to the Detailed Specifications for that model. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba...
Page 218: Other Toshiba Internet Web Sites
If Something Goes Wrong Other Toshiba Internet Web sites Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com computers.toshiba.com accessories.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm http://servicio.toshiba.com Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited...
Page 219 United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. If Something Goes Wrong Toshiba’s worldwide offices Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome...
Page 220: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 221: Password Security
Password security This hot key blanks the display. Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user.
Page 222: Maintaining Security When The Battery Is Not Fully Charged
Hot Keys Password security If you clicked Choose a screen saver, the Screen Saver tab has already been selected. If it is not selected, click the Screen Saver tab. Click the On resume, password protected check box. Click OK. Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time.
Page 223: Power Usage
Hot Keys Power usage Power usage This hot key displays the Power Schemes tab of the Power Options Properties window. (Sample Illustration) Power Schemes tab in Power Options You can configure your computer’s power usage using the drop down lists. You can choose one of the provided power schemes or select your own custom settings.
Page 224: Standby Mode
Hot Keys Standby mode Standby mode This hot key places the computer into Standby mode. ❖ (Sample Illustration) Standby confirmation box ❖ A message box displays by default to confirm that the computer is entering Standby mode. You can choose not to display this message box.
Page 225: Hibernation Mode
Hibernation mode This hot key places the computer into Hibernation mode. ❖ (Sample Illustration) Hibernation confirmation ❖ Hibernation mode If Hibernation mode is enabled (the default) a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this message box.
Page 226: Display Modes
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: ❖ ❖ ❖ ❖ ❖ ❖ (Sample Illustration) Display options window In order to use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.
Page 227: Display Brightness
For more information, see Zooming Utility” on page This hot key turns the Zooming utility to zoom-in. For more information, see Utility” on page Display brightness “Disabling or enabling the Dual Mode 159. “TOSHIBA Zooming 159. Hot Keys “TOSHIBA...
Page 228: Keyboard Hot Keys
Hot Keys Keyboard hot keys Keyboard hot keys This hot key informs you when the Wireless antenna on-off switch is in the off position. (No message appears when the Wi-Fi antenna on-off switch is in the on position.) This hot key turns the cursor control overlay on and off.
Page 229: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved United Kingdom...
Page 230: Toshiba Computer
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 231: Getting Started
All Programs, TOSHIBA, Networking, ConfigFree. ❖ Double-click the ConfigFree icon ❖ Press the TOSHIBA Assist button (if applicable to your system) to open the TOSHIBA Assist, and then click the ConfigFree icon. ❖ Click the ConfigFree icon click the desired utility. 245.
Page 232: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer Getting Started If your computer is not connected to a network, the ConfigFree NOTE icon on the taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities.
Page 233: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer (Sample Illustration) ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 234 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ Location of wireless communication switch (identified with a yellow arrow) ❖ Status of wireless communication switch (on or off) (Sample Illustration) Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address.
Page 235 Using ConfigFree™ with your Toshiba Computer If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen and an orange frame describes the relevant location.
Page 236: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN and Bluetooth devices currently used in the neighborhood, and displays information about them on a virtual map. To search for wireless devices: Click the Click Search for Wireless Devices.
Page 237 Using ConfigFree™ with your Toshiba Computer (Sample Illustration) Viewing Wi-Fi devices Creating a new wireless connection This feature is only supported on systems running Windows NOTE XP SP2. To add a new wireless connection to an Access Point: Open the Search for Wireless Devices option from ConfigFree Launcher.
Page 238 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Illustration) Dragging a device to the Access Point (Sample Illustration) Wireless settings screen Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection...
Page 239 Using ConfigFree™ with your Toshiba Computer Creating a detected device wireless connection The following screen shows an example of Bluetooth devices that are detected using the Search for Wireless Devices option. Moving the mouse cursor over a device icon displays information about the device.
Page 240 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Illustration) Dragging the file to the Bluetooth device icon To be prompted for the device: Drag and drop the file to the Bluetooth radar icon on the ConfigFree Launcher. (Sample Illustration) Dragging the file to the Bluetooth radar icon Or, you can right click on the file and select Send to Bluetooth Devices.
Page 241: Profile Settings
Using ConfigFree™ with your Toshiba Computer (Sample Illustration) Selecting Send to Bluetooth Devices option Choose a file recipient. Click Send. During a file transfer, connecting and disconnecting to the NOTE selected device will occur automatically. Disconnecting from a Bluetooth device To disconnect from a Bluetooth device: Place the cursor on top of the connected line.
Page 242 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities If you visit a client company occasionally, for example, you can set up a profile to match that environment and connect to the network. Similarly, users who access networks in the office and at home can set up profiles to handle these networking environments.
Page 243 Using ConfigFree™ with your Toshiba Computer Enter any optional comments, if desired. Click Change Icon and select an icon for this profile. Click the more capture options. Under Captured Items, select the items you want to capture for this profile.
Page 244 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Illustration) Expanded Add Profile screen The online help provides real-world examples of setting up NOTE profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary.
Page 245: Configfree Summit
Using ConfigFree™ with your Toshiba Computer ConfigFree SUMMIT The ConfigFree SUMMIT utility is a convenient way to share files with other users and to transfer files between your computers at home and at work. This utility is faster and more dependable than sending the files via email.
Page 246 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Illustration) Users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. ❖ To share a file with one user, drag and drop the file on the user’s icon.
Page 247 Using ConfigFree™ with your Toshiba Computer (Sample Illustration) Sharing a file with one user ❖ To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired. If you are the Host of the summit, and drag a file to the center...
Page 248 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Participating users must be connected by LAN, wireless LAN, NOTE or Bluetooth (PAN). Firewall software may prevent ConfigFree SUMMIT from working. Using ConfigFree SUMMIT To host a ConfigFree SUMMIT: Click the Click SUMMIT. Other users appear on the SUMMIT main window.
Page 249: Quick Connect
(DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and re- established later.
Page 250 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities To review the current Toshiba Wireless Projector settings and change them if necessary: Click the Move the mouse pointer to Toshiba Wireless Projector (DPJ), then click Settings. The Quick Connect properties dialog box appears.
Page 251 Quick Connect function was started: ❖ If the Toshiba Wireless Projector utility is closed. ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection). ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device.
Page 252: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 253 Using ConfigFree™ with your Toshiba Computer To use the Semi-Automatic Switch feature: Right-click the Click Auto Switch. The Auto Switch dialog box appears. Select the Auto Switch (SSID) tab. Select the profile to be automatically selected when the SSID is detected, then click Add. The profile is moved to the List of target SSIDs and profiles.
Page 254: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory complementary metal-oxide semiconductor...
Page 255 direct current direct memory access DIMM dual inline memory module disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission gigabyte...
Page 256 Glossary SCSI DDRAM SRAM SVGA Terms These terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 257 application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 258 Glossary cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD —...
Page 259 controller — A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU — See central processing unit (CPU). CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs.
Page 260 Glossary disk — A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk. disk drive —...
Page 261 DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM. emulation — A technique in which a device or program imitates another device or program.
Page 262 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 263 icon — A small image displayed on the screen that represents a function, file, or program. interlaced — A method of refreshing a computer screen, in which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen image. Compare non-interlaced. internal device —...
Page 264 Glossary logical drive — A section of a disk that is recognized by the operating system as a separate disk drive. A system’s logical drives may differ from its physical drives. For example, a single hard disk drive may be partitioned into two or more logical drives. memory —...
Page 265 non-system disk — A disk for storing programs and data that cannot be used to start the computer. Compare system disk. online — Available through the computer. Online may refer to information being read from your own computer’s hard disk, such as online documentation or online help, or to information coming from another company on a company network or the Internet.
Page 266 Glossary processor — See central processing unit (CPU). program — A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility. See also operating system, application, utility. properties —...
Page 267 select — To highlight or otherwise specify text, data, or graphics with the intent to perform some operation on it. serial — Processes that occur one at a time. In communications, it means the transmission of one bit at a time sequentially over a single channel.
Page 268 Glossary utility — A computer program designed to perform a narrowly focused operation or solve a specific problem. Utilities are often related to computer system management. Web — See World Wide Web. Wi-Fi — A trademarked term by the Wi-Fi Alliance which stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components.
Page 269: Index
106 not charging 188 power schemes hot key 113 power usage mode 223 real-time clock (RTC) 103 removing 114 BIOS Setup see TOSHIBA Hardware Setup Bridge Media slot 140 button power 53 start 123 creating 97 playing an audio 96...
Page 270 Index character keys 83 charging the battery 50 checking device properties 186 click 63 communications network connection 127 system resources 184 compact disc positioning 95 compact discs handling 95 inserting 94 removing 98 computer non-system disk or disk error message 180 not accessing disk drives 179 running on battery power 101 setting up 43...
Page 271 environment computer-friendly 39 error messages device driver conflict 183 general hardware problem 183 non-system disk or disk error problem with display settings/ current settings working with hardware program has performed an illegal operation 177 warning resume failure 179 Error-checking 194 Ethernet LAN port 128 expansion memory slot 56 exploring the desktop 121...
Page 272 Index recycle bin 122 safety 36 Industry Canada requirement 4 installation memory module 54 installing memory modules 53 mouse 68 instant passwords, using 149 Internet bookmarked site not found 182 connecting to 130 features 132 slow connection 182 surfing 131 uploading and downloading files 132 URL address not found 182...
Page 273 195 changing display properties checking device properties 186 computer hangs when PC Card computer will not power up 178 contacting Toshiba 216 corrupted/damaged data files Device Manager 185 disabling a device 186 disk drive is slow 194...
Page 274 Index Internet connection is slow 182 keyboard not responding 179 missing files/trouble accessing a disk 193 modem transmitting 202 no sound 197 non-system disk or disk error PC Card 197 checklist 198 error occurs 200 hot swapping fails 200 not recognized 200 slot appears dead 199 power and batteries 188 printer 201...
Page 275 124 taskbar 124 television adjusting display 68 Toshiba registering computer 45 worldwide offices 218 Toshiba Assist 144 Toshiba Hardware Setup 157 Toshiba online resources 100 Toshiba utilities 143 traveling tips 120 troubleshooting DVD player general problems 206 DVD-ROM drive 196...

Toshiba P100-ST7211 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Toshiba Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree™ with Your Toshiba Computer

Quick Links

Related Manuals for Toshiba P100-ST7211

Summary of Contents for Toshiba P100-ST7211