Mitsubishi Electric MELSEC Q Series Reference Manual page 324

Cc-link ie controller network

Hide thumbs Also See for MELSEC Q Series:

Table of Contents

(d) RRUN/RSTOP/RTMRD/RTMWR instruction

Create an interlock with the following link special relay (SB) and link special register (SW) before

executing an instruction.

• Baton pass status (own station) (SB0047)

• Baton pass status of each station (SB00A0) (When all stations are specified)

• Baton pass status of each station (SB00A0 to SW00A7)

If the instruction failed, an error code is stored in Send/receive instruction processing result

(SW0030 to SW0037) corresponding to the channel used by the own station.

Check the error and take corrective actions according to the error code. (

Baton pass status (own station)

Baton pass status of each station

(e) RIRD/RIWT instruction

Create an interlock with the following link special relay (SB) and link special register (SW) before executing an

instruction.

• Baton pass status (own station) (SB0047)

• Baton pass status of each station (SB00A0 to SW00A7)

Baton pass status (own station)

Send/receive instruction (1) processing result

Send/receive instruction (2) processing result

Send/receive instruction (3) processing result

Send/receive instruction (4) processing result

Send/receive instruction (5) processing result

Send/receive instruction (6) processing result

Send/receive instruction (7) processing result

Send/receive instruction (8) processing result

Baton pass status of each station

Baton pass status of each station

Page 511, Section 10.2)

Show Quick Links

Table of Contents

Melsec qj71gp21-sx Melsec qj71gp21s-sx