SPECIFICATIONS Model DVF104 DVF154 Pump type Ceramic gear system Chemical tank capacity Tank drain Without With Spray valve Integral grip lever Dimension (W X L X H) 315 mm x 225mm x 415 mm 345 mm x 235 mm x 525 mm Net weight 3.8 kg...
The followings show the symbols used for the equipment. The vibration total value (tri-axial vector sum) deter- Be sure that you understand their meaning before use. mined according to EN60745, EN50580: Model DVF104 Read instruction manual. Vibration emission (a ) : 2.5 m/s or less Uncertainty (K) : 1.5 m/s...
Page 4
Do not abuse the cord. Never use the cord for 21. Maintain power tools. Check for misalignment carrying, pulling or unplugging the power tool. or binding of moving parts, breakage of parts Keep cord away from heat, oil, sharp edges and any other condition that may affect the or moving parts.
Page 5
24. Avoid prolonged operation of sprayer. Firmly close chemical tank lid to prevent leaking. Whenever possible, rotate operators. Never transfer chemical to another container. 25. If even a slight headache or dizziness, etc., occurs, stop spraying work immediately, Always thoroughly wash empty chemical and consult a doctor.
It will red part cannot be seen. If not, it may accidentally fall out of also void the Makita warranty for the Makita tool and the tool, causing injury to you or someone around you.
Page 7
Press the check button on the battery cartridge to indi- NOTE: cate the remaining battery capacity. The indicator lamps • All connector units use packing. Before assem- light up for a few seconds. bly, always check to see that the units have packing.
Page 8
Back strap attaching method DVF104 DVF154 ► 1. Pass the belt part of the back strap through the slot on the sprayer. 2. Clip on back strap hooks 3. Clip on back strap hooks Use the figure pointers to attach the back strap at top and bottom, making sure there are no twists in the strap.
OPERATION NOTE: • Check to make sure the tank is loaded with chemical or clean water when operating the CAUTION: sprayer, as continued operation of the sprayer with an empty tank may burn out the pump. • Before inserting the battery cartridge into •...
Chemical replenishment NOTE: When shortening the strap, it will move rela- tively easily if there is no weight exerted on the strap. WARNING: • When changing chemical, be sure to carefully MAINTENANCE wash the tank, pump, and nozzle, etc. with clean water.
Cleaning lever cock strainer Useful Tips Spray pipe holder Be sure to attach the holder in the right direction. ► 1. Lever cock cap 2. Strainer ► 1. Spray pipe holder Remove lever cock cap and clean strainer. NOTE: NOTE: Water absorption strainer •...
Page 12
Chemical tank holder post The holder post also serves as a temporary holder for the chemical tank lid, so please hook it onto this post. Tank strainer Hands can be freed up by inserting the water hose in the useful notched section of the tank strainer. ►...
Page 13
What to do if you think there is a breakdown Before asking for repairs, first, conduct your own inspection. If you find a problem that is not explained in the manual, do not rashly dismantle the sprayer. Instead, ask Makita Authorized Service Centers, always using Makita replace- ment parts.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: •...