Table of Contents
Advertisement
Available languages
Available languages
SET UP
• The Honeywell ComfortTemp™ Ceramic Heater requires no assembly. Simply unpack heater and save all
packaging materials for off-season storage.
• Place the heater on a firm, level, open surface free from obstructions and at least 3 feet (0.9m) away from any
wall or combustible material.
• DO NOT use on an unstable surface such as bedding or deep carpeting.
• BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE A TRIPPING HAZARD.
MOVING THE HEATER
• This heater is equipped with a Cool Touch handle for your convenience.
• Turn off the heater.
• Allow the heater to cool down.
• Unplug heater and move.
OPERATION
• NOTE: NEVER LEAVE AN OPERATING HEATER
UNATTENDED
• Plug the heater into a polarized 120V outlet.
DO NOT FORCE THE POLARIZED PLUG INTO
THE OUTLET; it will only fit one way.
• With wide range oscillation, the Honeywell
ComfortTemp™ Ceramic Heater is versatile and
designed to be placed in the center of the room or
closer to the wall (at least 3 feet away/0.9 meters)
for maximum convection room heating.
• Turn heater on by pressing the Power Button ( ).
The Power Indicator will illuminate and the heater
will start in the highest level setting.
• The heater has two operational modes, which can
be chosen using the red switch on the back of the
unit (Fig. 2):
- Continuous heating (
is manually shut off, by pressing the power button
( ).
- Auto Shut-Off (
automatically shut off after 8 hours each time that
you use the heater. This built-in feature can help
ensure that the heater is not accidentally left on.
NOTE: See the SafeGuard® Auto Shut-Off Feature section for more information on this feature.
• This heater comes pre-set from the factory with the Auto Shut-Off mode engaged. When the unit is turned on, the
Auto Shut-Off icon (
the Auto Shut-Off mode.
• Should you NOT want the heater to automatically shut off after 8 hours, switch to Continuous heating by simply
pressing the red switch on the back of the unit. Once selected, the Continuous heat icon (
the top of the control panel.
) – heater will run until it
) mode - heater will
) will be illuminated on the top of the controls. All features are functional while operating in
Fig. 1
Continuous
Oscillate
Power
Button
NOTE: Controls/features will vary slightly by model
Fig. 2
Auto Shut-Off
3
Auto
Shut-Off
Heat
Level
Indicator
Timer
Heat
Setting
Continuous
) will illuminate on
Advertisement
Table of Contents
