Table of Contents
Advertisement
SET-UP
Place the heater on a firm, level, open surface free from obstructions and at least 3 feet (0.9 m) away from
any wall or combustible material. DO NOT use on an unstable surface such as bedding or deep carpeting.
BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE A TRIPPING HAZARD.
MOVING THE HEATER
Turn off the heater.
Allow it to cool for ten minutes.
Unplug heater and move it to the desired location. This heater is equipped with a Cool Touch Handle for your
convenience.
OPERATION
NOTE: NEVER LEAVE AN OPERATING HEATER UNATTENDED
VersaHeat™ can either operate in the upright position or on its side.
All Purpose Heater Operation
• Plug the heater into a polarized 120V outlet.
DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET;
it will only fit one way.
• The Power Button is equipped with three (3) settings: Fan Only
(
), Low ( ) and High (
watts of power and the High ( ) heat setting uses 1100 Watts of
power. The Fan only (
provide heat. You can select the proper setting to accommodate
your comfort level with the Power Button (
any setting, the red Power Light will come on. Because the Low
( ) heat setting does not require as much electricity to operate,
it is more energy efficient and may be a better option if you are
concerned about amperage draw on a circuit when the heater is on
the High setting.
• The Timer Button (
minutes (30m) one hour (1h) and two hours (2h). The timer option
will illuminate once selected. The timer is not on if none of those
three (3) timer settings are illuminated.
• To turn the unit off, press the power until none of the heat settings
are illuminated and the red power light is off. Unplug the heater
when you are finished using it.
). The Low ( ) heat setting uses 750
) setting uses very low power and does not
). When you choose
) is equipped with three (3) settings: 30
4
Advertisement
Table of Contents
