How To Use Configuration Replace And Configuration Rollback; Creating A Configuration Archive - Cisco Catalyst 9400 System Management Configuration Manual
Cisco ios xe bengaluru 17.4.x
Hide thumbs
Also See for Catalyst 9400:
- Hardware installation manual (192 pages) ,
- Installation note (32 pages) ,
- Troubleshooting manual (14 pages)
Table of Contents
Advertisement
Configuration Replace and Configuration Rollback
How to Use Configuration Replace and Configuration Rollback
Creating a Configuration Archive
No prerequisite configuration is needed to use the configure replace command. Using the configure replace
command in conjunction with the Cisco IOS configuration archive and the archive config command is optional
but offers significant benefit for configuration rollback scenarios. Before using the archive config command,
the configuration archive must be configured. Perform this task to configure the characteristics of the
configuration archive.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Command or Action
enable
Example:
Device> enable
configure terminal
Example:
Device# configure terminal
archive
Example:
Device(config)# archive
path url
Example:
Device(config-archive)# path
flash:myconfiguration
maximum number
Example:
Device(config-archive)# maximum 14
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
How to Use Configuration Replace and Configuration Rollback
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Enters archive configuration mode.
Specifies the location and filename prefix for
the files in the Cisco IOS configuration archive.
Note
If a directory is specified in the path
instead of file, the directory name
must be followed by a forward slash
as follows: path flash:/directory/.
The forward slash is not necessary
after a filename; it is only necessary
when specifying a directory.
(Optional) Sets the maximum number of archive
files of the running configuration to be saved
in the Cisco IOS configuration archive.
• The number argument is the maximum
number of archive files of the running
configuration to be saved in the Cisco IOS
configuration archive. Valid values are
from 1 to 14. The default is 10.
329
Advertisement
Table of Contents
Troubleshooting
