Cisco 7201 Quick Start Manual page 11

Cisco 7201: quick start

Hide thumbs Also See for 7201:

Table of Contents

Figure 8

Attaching a Grounding Lug to the Chassis Ground Connector

Chassis ground connector

Grounding lug

Locate the chassis ground connector on the rear of your router chassis.

Step 5

Step 6

Insert the two screws through the holes in the grounding lug.

Use the Number 2 Phillips screwdriver to carefully tighten the screws until the grounding lug is held firmly to the

Step 7

chassis. Do not overtighten the screws.

Connect the opposite end of the grounding wire to the appropriate grounding point at your site to ensure an adequate

Step 8

chassis ground.

This completes the procedure for attaching a chassis ground connection. Go to the

on page 12

for information on attaching cables.

Screws

Wire

"Connect the Router to the Network" section

Table of Contents

Chapters

Table of Contents