Replace The Usb Flash Memory Module; Remove And Replace An Sfp Module - Cisco 7201 Quick Start Manual
Cisco 7201: quick start
Hide thumbs
Also See for 7201:
- Regulatory compliance and safety information manual (76 pages) ,
- Installation and configuration manual (166 pages) ,
- Datasheet (10 pages)
Table of Contents
Advertisement
Replace the USB Flash Memory Module
Figure 32
Installing a USB Flash Memory Module
L IN K /A C T
T X
G E 0 /3
Note
For detailed information about the Cisco IOS commands that support USB Flash memory modules, see the USB Storage
document at http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gt_etokn.html.
Do not remove a USB Flash memory module when a read or write operation to the USB Flash memory module is
Caution
in progress. The router might reload, or the USB Flash memory module can be damaged.
To remove a USB Flash memory module or Aladdin eToken Pro key, pull it from the USB port.
Step 1
Only Cisco USB Flash memory modules and the Aladdin USB eToken Pro key are supported by Cisco routers.
Note
Insert a Cisco USB Flash memory module or the Aladdin USB eToken Pro key into the Cisco 7201 USB port as shown
Step 2
in
Figure
32. The USB Flash memory module can be inserted in only one way, and can be inserted or removed regardless
of whether the router is powered on or not.
Remove and Replace an SFP Module
Warning
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view
directly with optical instruments. Statement 1051
Warning
Class 1 laser product. Statement 1008
Warning
Class 1 LED product. Statement 1027
Warning
During these procedures, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the
backplane with your hand or any metal tool, or you could shock yourself. Statement 94
44
C O N S O L E
V
S F P
R X
M N G M N T
U S E O N LY
A U X
F E 0 /0
0
F E
L IN K
Advertisement
Chapters
Table of Contents
