Page 1
Cooker Hood User Manual HCP91030X 01M-8850823200-0116-02...
Page 2
Please read this manual first! Dear Customers! Thank you for preferring a Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Important safety and environmental instructions This section contains safety in- If the power cable is faulty, it • structions that will help protect should be replaced by a qualified from risk of personal injury or prop- person certified by the manufac- erty damage.
Important safety and environmental instructions 1.1.2 Product safety Therefore, be careful about cloths and curtains. You can use a pipe with a diameter • Never leave the cooker unat- of 120 mm or 150 mm on the flue • tended when frying foods; other- connection of the hood.
Important safety and environmental instructions Simultaneous and smooth op- This appliance can be used by the • • eration of the hood and another children who are at the age of 8 or device that require air is only pos- over and by the people who have sible when a low pressure of 4 Pa limited physical, sensory or men-...
Important safety and environmental instructions 1.3 Compliance with WEEE Directive and disposing of the waste product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling.
Technical specifıcations of your appliance 2.1 Controls and parts 1. Chimney Mounting Bracket 2. Upper Chimney Cover 3. Lower Chimney Cover 4. Canopy Section 5. Aluminum Filters 2.2 Technical data 220-240V ~50Hz Power con- sumption 260 W Absorption Markings on the product or the values stated in other documents supplied with the product are values obtained under laboratory conditions as per relevant standards.
Installing your appliance 3.1 Wall drilling and bracket fixing 101 101 min. 750 mm 3.1.1 Wall mounting • Mark a reference point as indicated at 101 mm from the vertical reference line and Y mm above • Draw a vertical line on the supporting wall up to the horizontal reference line.
Installing your appliance 3.2 Mounting the hood body • Before attaching the hood body, tighten the two screws Vr located on the hood body mounting points. • Hook the hood body onto the support screws. • Fully tighten the support screws. •...
Installing your appliance 3.4 Chimney assembly • Ducted mode (Vented mode) In the ducted mode, air is drawn into the hood, fat are trapped by aluminum filters. Odors, fumes and condensation are then expelled to the outside. In this mode, only the aluminum filters are installed. •...
Operating your appliance The hood is equipped with 3 speed control. Electronic control buttons are located on the front edge of the range hood canopy or enrichment panel. Light On/Off Button Switches the lighting system on and off. Blower On and Low Speed Button Switches the extractor motor on at low speed.
Cleaning and maintenance 5.1 Surfaces Wash with warm soapy water and a soft sponge. Never use abrasive detergent, scouring pads, steel wool or solvents on any part of this appliance as this will cause irreparable damage. Dry the kitchen hood using a cloth that does not produce fluff. 5.2 Aluminium filters Wash in the dishwasher, it is advisable to stack them vertically to avoid food residue sticking to...
Troubleshooting Symptoms Possible Cause Action Motor does not working No electrical supply Ensure the plug is connected properly. Reset circuit breaker. Poor airflow Aluminum filters clogged Clean the filters and replace when dry Charcoal filters clogged Replace charcoal the new filters charcoal with new filterssets Motor running but no airflow Butterfly valve jammed...