Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch SMS2ITW41G
Summary of Contents for Bosch SMS2ITW41G
- Page 1 Dishwasher SMS2ITW41G [en] User manual...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Basket heights........ 22 General information...... 4 Before using for the first time .. 22 Intended use........ 4 Performing the initial configura- Restriction on user group.... 4 tion.......... 22 Safe installation ........ 4 Safe use ........... 6 Water softening system.... 23 Damaged appliance ...... 7 Overview of water hardness set- Risk to children ........ 8... - Page 3 Technical specifications.... 54 Terminate programme.... 32 Information regarding Free and Switching off appliance .... 32 Open Source Software .... 55 Basic settings........ 33 Declaration of Conformity .... 55 Overview of basic settings ..... 33 Changing basic settings.... 34 Home Connect ...... 34 Home Connect quick start ..... 35 Home Connect settings.... 35 Remote Start ...... 35...
-
Page 4: Safety
en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing. ▶...
-
Page 6: Safe Use
en Safety Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause serious harm to health. ▶ Follow the safety instructions and directions for use on the packagings of detergent and rinse aid products. -
Page 7: Damaged Appliance
Safety en WARNING ‒ Risk of tipping! Overfilling the Baskets may cause the appliance to tip up. ▶ Never overfill the Baskets with free-standing appliances. WARNING ‒ Risk of electric shock! ¡ An ingress of moisture can cause an electric shock. ▶ Only use the appliance in enclosed spaces. ▶... -
Page 8: Risk To Children
en Safety ¡ Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be replaced with a special connection cable, which is available from the manufacturer or his Customer Service. - Page 9 Safety en WARNING ‒ Risk of chemical burns! Rinse aid and detergent may cause chemical burns to the mouth, throat and eyes. ▶ Keep children away from detergent and rinse aid products. ▶ Keep children away from the appliance when open. The wa- ter in the interior of the dishwasher is not drinking water.
-
Page 10: Preventing Material Damage
en Preventing material damage Only use the water hoses sup- ▶ Preventing material damage Preventing material dam- plied with the appliance or genu- ine spare hoses. Never re-use water hoses that ▶ have been used before. Preventing material damage Safe installation ¡... -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en So as not to scratch the finish AquaSensor ▶ on the appliance, do not use The AquaSensor is an optical meas- sponges with a rough surface or uring device (light barrier) which abrasive cleaning agents. measures the turbidity of the rinsing To prevent corrosion, do not use ▶... -
Page 12: Installing And Connecting The Appliance
en Installation and connection ¡ Mains cable Connect the wastewater hose to the outlet connection of the siphon ¡ Quick reference guide using the enclosed parts. Installing and connecting the When doing so, check that the wastewater hose is not kinked, appliance crushed or twisted. - Page 13 Installation and connection en ¡ Please note that the water safety system is only functional if there is a power supply. Insert the non-heating appliance plug of the power cable into the appliance. Insert the mains plug of the appli- ance into a nearby socket. The connection data for the appli- ance can be found on the rating plate.
-
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 54. -
Page 15: Controls
Familiarising yourself with your appliance en "Detergent" → Page 26 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 20 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 23 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 16 en Familiarising yourself with your appliance 3 4 5 6 7 8 9 "Switching on the appliance" → Page 31 ON/OFF button and reset button "Switching off the appliance" → Page 32 "Terminating the programme" → Page 32 "Programmes" → Page 17 Programme button "Water softening system" → Page 23 Special salt refill indicator "Rinse aid system"...
-
Page 17: Programmes
Programmes en Programmes Programmes You can find an overview of the pro- ning time will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 18: Information For Test Institutes
en Additional functions Programme Programme sequence Additional func- tions Tableware: Time-optimised: Extra Dry → "Additional ¡ Cleaning mixed table- ¡ Cleaning 65 °C Express 65° - 1h ware and cutlery. functions", ¡ Intermediate rinse Level of soiling: Page 18 ¡ Final rinse 69 °C ¡ Removing common ¡... -
Page 19: Features
Features en panel of your appliance, are available Features Features depending on the appliance configur- ation. You can find an overview of the pos- Features Additional func- sible features of your appliance and tion how to use them here. These features depend on the model ¡... -
Page 20: Bottom Basket
en Features Re-attach the basket to the upper rollers (setting 3) or lower rollers (setting 1). → "Basket heights", Page 22 Cutlery basket Arrange cutlery in the cutlery basket, always without sorting it and with the Check that the basket is level on sharp points downwards. both sides. -
Page 21: Folding Prongs
Features en Folding prongs Baking sheet spray head Use the folding prongs to position Use the baking sheet spray head to tableware securely, e.g. plates. clean large items of tableware, e.g. trays, grilles and plates. You can fold the prongs down to po- sition pans, bowls and glasses Arrange max. -
Page 22: Basket Heights
en Before using for the first time Insert the baking sheet spray head Removing baking sheet spray head in the holder and turn to the If you no longer require the baking right . sheet spray head, remove it from the appliance. -
Page 23: Water Softening System
Water softening system en Start the Programme with the Water softening system Water softening system highest cleaning temperature without tableware. Hard water leaves limescale on the Water softening system To remove any marks from water tableware as well as the washing or other residues, we recommend tank and parts of the appliance may you operate the appliance without... -
Page 24: Special Salt
en Water softening system Press repeatedly until the Note: Only use special salt for right water hardness has been set. dishwashers. Do not use salt tablets. The value H04 is set at the factory. Do not use table salt. To save the settings, press Add the special salt to the dis- for 3 seconds. -
Page 25: Regeneration Of The Water Softening System
Rinse aid system en erally only be used up to a water Additional power consumption in 0.05 hardness of 26 °E without adding special salt. The consumption values specified ¡ The water hardness is 0 - 8 °E. are laboratory measurements determ- You do not need to use special ined in accordance with the currently salt. -
Page 26: Setting The Amount Of Rinse Aid
en Detergent Add rinse aid up to the max mark. To save the settings, press for 3 seconds. Switching the rinse aid sys- tem off If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid compon- ent, you can switch the rinse aid sys- tem off. - Page 27 Detergent en Modern, powerful detergents mainly Tip: Suitable detergents are available use a low-alkaline formulation with online via our website or from "Cus- enzymes. Enzymes break down tomer Service" → Page 53. starch and remove protein. Oxygen- Separate detergents based bleaching agents are generally used to remove coloured marks, e.g.
-
Page 28: Unsuitable Detergents
en Detergent ¡ The function of rinse aid is limited Unsuitable detergents with combined detergents. You will Do not use detergent which could generally get better results using cause damage to the appliance or rinse aid. present a risk to health. ¡... -
Page 29: Tableware
Tableware en Close the lid of the detergent dis- Damage to glass and table- penser. ware Avoid damage to glass and table- ware. Cause Recommendation The following table- Only put tableware in ware is not dish- the dishwasher if it is washer-safe: marked as dish- ¡... -
Page 30: Arrange Tableware
en Tableware To save resources, do not pre- Cause Recommendation rinse tableware under running wa- The water temperat- Select a programme ter. ure of the programme with lower temperat- Observe the following when arran- is too high. ures. ging tableware: After the programme –... -
Page 31: Removing Tableware
Basic operation en Removing tableware Setting a programme To adjust the wash cycle to the soil- WARNING ing level of the tableware, select a Risk of injury! suitable programme. Hot tableware can cause burns to the Press the programme button re- skin. -
Page 32: Starting The Programme
en Basic operation few minutes and then close it. This Starting the programme will help prevent excess pressure Press building up in the appliance and stop ▶ a The programme has ended when the appliance door bursting open. the display shows "0h:00m". Press ... -
Page 33: Basic Settings
Basic settings en Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H00 - H07 Set the water softening system to your water hardness. -
Page 34: Changing Basic Settings
en Home Connect Basic setting Display text Selection Description Remote Start rc0 - rc2 Activate or deactivate → "Remote Start ", Page 35. The following settings are possible: ¡ With the setting "rc0", the func- tion is permanently deactivated. ¡ With the setting "rc1", the func- tion can be selected via the button. -
Page 35: Home Connect Quick Start
Home Connect en The Home Connect app guides you With the help of the Home Connect through the entire login process. Fol- App scan the QR code. low the instructions in the Home Con- nect app to configure the settings. Tips ¡ Please consult the documents sup- plied by Home Connect. -
Page 36: Remote Diagnostics
en Cleaning and servicing Press . ¡ Security certificate of the Wi-Fi ▶ communication module (to ensure If you open the appliance door, the a secure data connection). function is automatically deactiv- ¡ The current software and hardware ated. version of your appliance. button lights up. -
Page 37: Cleaning Products
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.bosch-home.com/ mend cleaning your appliance at reg- store or from customer service. ular intervals. Machine Care is a programme which... -
Page 38: Filter System
en Cleaning and servicing Notes Filter system ¡ Run the Machine Care programme The filter system removes coarse without any tableware in the dish- soiling from the dishwashing cycle. washer. ¡ Only use machine care products and machine cleaners specially designed for dishwashers. ¡... -
Page 39: Cleaning Spray Arms
Cleaning and servicing en Pull down the micro filter to re- Cleaning spray arms move. Limescale and soiling in the dish- washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove ... -
Page 40: Troubleshooting
en Troubleshooting Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 41 Troubleshooting en Fault Cause Troubleshooting E:32-00 will light up altern- Unscrew the water connection. ately or indicator for water Remove the filter from the supply supply lights up. hose Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
-
Page 42: Washing Results
en Troubleshooting Fault Cause Troubleshooting E:90-01 will light up altern- Mains voltage is too low. This is not a fault on the appliance. ately. Contact an electrician. Have the mains voltage and elec- trical installation checked by an electrician. A different error code ap- A technical fault is present. - Page 43 Troubleshooting en Fault Cause Troubleshooting Tableware is not dry. Water collects in recesses of Position tableware at an angle ▶ the tableware or cutlery. where possible. The combined detergent Use rinse aid to improve drying per- used has a poor drying per- formance.
- Page 44 en Troubleshooting Fault Cause Troubleshooting Remnants of food on table- Tableware is placed too Arrange tableware with sufficient ware. close together or basket is space in between. overfilled. The spray jets must reach the sur- faces of the tableware. Avoid points of contact. Spray arm rotation is Arrange tableware so that it does ▶...
- Page 45 Troubleshooting en Fault Cause Troubleshooting Detergent residue in the ap- Tabs are used in the quick Select a more intensive "Pro- ▶ gramme" → Page 17 or use pliance or short programme. Dissolv- "Powder detergent" → Page 26. ing time of the tab is not at- tained.
- Page 46 en Troubleshooting Fault Cause Troubleshooting Stubborn white coatings are Too little detergent is being Increase the amount of detergent ▶ present on tableware, inside used. used or change "Detergent " → Page 26. the appliance or the door. Washing programme selec- Select a more intensive washing ▶...
- Page 47 Troubleshooting en Fault Cause Troubleshooting Coloured deposits (yellow, The formation of films is due Check the setting of the water orange, brown) that are easy to ingredients of food rem- softening system. to remove are present inside nants and tap water (limes- Add special salt.
- Page 48 en Troubleshooting Fault Cause Troubleshooting Irreversible clouding of Glasses are not dishwasher- Use dishwasher-proof glasses. ▶ glassware. proof, only suitable for dish- Glasses are usually only suitable for washers. use in a dishwasher, i.e. long-term wear or long-term changes must be expected.
-
Page 49: Home Connect Problem
Troubleshooting en Home Connect problem Fault Cause Troubleshooting Connection to home net- WLAN on router is not act- Check the wireless network con- ▶ work is not established. ive. nection of your router. WLAN display is flashing. Connection to home net- Activate the wireless network con- ▶... -
Page 50: Mechanical Damage
en Troubleshooting Fault Cause Troubleshooting Water is left in the appliance Programme has not yet Wait until the programme ends or ▶ at the end of the pro- ended. cancel the programme with Reset. gramme. → "Terminate programme", ▶ Page 32 Appliance cannot be Software update is taking Wait until the software update has ▶... -
Page 51: Noise
Troubleshooting en Fault Cause Troubleshooting Appliance door cannot be Door cannot be closed due Check whether the appliance has ▶ closed. to installation method. been installed properly. When closed, the appliance door, its decor or attached parts should not knock against adjacent cabin- ets or the worktop. -
Page 52: Clean Wastewater Pump
en Transportation, storage and disposal Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 53: Protect Appliance From Frost
Customer Service en Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 54: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
en Technical specifications which your appliance was placed on Power rating 2000 - 2400 W the market within the European Eco- Fuse 10 - 16 A nomic Area. Power consumption Off mode/standby Note: Under the terms of the manu- mode: 0.50 W facturer's warranty the use of Cus- Left-on mode: 0.50 W tomer Service is free of charge. - Page 55 You Declaration of Conformity can also access the applicable li- cence information via your Home Robert Bosch Hausgeräte GmbH Connect App: "Profile -> Legal inform- hereby declares that the appliance ation -> Licence Information". You...
- Page 56 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.