Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch SMS2ITW40G
Summary of Contents for Bosch SMS2ITW40G
- Page 1 Dishwasher SMS2ITW40G [en] User manual...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Basket heights........ 22 General information...... 4 Before using for the first time .. 22 Intended use........ 4 Performing the initial configura- Restriction on user group.... 4 tion.......... 22 Safe installation ........ 5 Safe use ........... 6 Water softening system.... 23 Damaged appliance ...... 7 Overview of water hardness set- Risk to children ........ 8... - Page 3 Customer Service...... 54 Terminate programme.... 32 Product number (E-Nr.), produc- Switching off appliance .... 32 tion number (FD) and consecut- Basic settings........ 33 ive numbering (Z-Nr.) ..... 55 Overview of basic settings ..... 33 Technical specifications.... 55 Changing basic settings.... 34 Information regarding Free and Open Source Software .... 56 Home Connect ......
-
Page 4: Safety
en Safety Safety Please read the safety information to ensure that you use the ap- pliance safely. General information You can find general information for this instruction manual here. ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡... -
Page 5: Safe Installation
Safety en Keep children under the age of 8 years away from the appliance and power cable. Safe installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of injury! Improper installation may cause injury. ▶ When installing and connecting the appliance, follow the in- structions in the manual and installation instructions. -
Page 6: Safe Use
en Safety WARNING ‒ Risk of burns! If the appliance is not installed properly, this may result in burns. ▶ With free-standing appliances, ensure that they are installed with the back panel against a wall. Safe use Follow these safety instructions when using the appliance. WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may... -
Page 7: Damaged Appliance
Safety en ¡ Knives and utensils with sharp points can cause injuries. ▶ Arrange knives and utensils with sharp points in the cutlery basket with the points downwards, on the knife shelf or in the cutlery drawer. WARNING ‒ Risk of scalding! If you open the appliance door while the programme is run- ning, hot water may splash out of the appliance. -
Page 8: Risk To Children
en Safety ▶ Never pull on the power cord to unplug the appliance. Al- ways unplug the appliance at the mains. ▶ If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box and turn off the water tap. - Page 9 Safety en WARNING ‒ Risk of crushing! With higher-level appliances, children can become crushed between the appliance door and cabinet doors underneath. ▶ Keep an eye on children when opening and closing the ap- pliance door. WARNING ‒ Risk of chemical burns! Rinse aid and detergent may cause chemical burns to the mouth, throat and eyes.
-
Page 10: Preventing Material Damage
en Preventing material damage ¡ Modified or damaged water hoses Preventing material damage Preventing material dam- may result in material damage and damage to the appliance. Never kink, crush, modify or cut ▶ through water hoses. Follow these instructions to prevent Preventing material damage Only use the water hoses sup- material damage to your appliance,... -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en ¡ Unsuitable cleaning agents may Saving energy damage the appliance. If you follow these instructions, your Do not use a steam cleaner. ▶ appliance will use less electricity and So as not to scratch the finish ▶... -
Page 12: Installation And Connection
en Installation and connection installing it under a continuous work- Installation and connection Installation and connec- top that is securely connected to ad- jacent cabinets. tion "Follow the safety instructions." To ensure proper operation, connect Installation and connection → Page 4 the appliance to the power and water "Follow the instructions for elec- supply correctly. -
Page 13: Drinking Water Connection
Installation and connection en The connection data for the appli- Drinking water connection ance can be found on the rating Connect your appliance to a drinking plate. water connection. Check that the mains plug is inser- ted properly. Installing the drinking water connection Note ¡... -
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarise yourself with the parts of your appliance. Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number"... -
Page 15: Controls
Familiarising yourself with your appliance en "Detergent" → Page 26 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 20 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 23 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 16 en Familiarising yourself with your appliance 3 4 5 6 7 8 9 "Switching on the appliance" → Page 31 ON/OFF button and reset button "Switching off the appliance" → Page 32 "Terminating the programme" → Page 32 "Programmes" → Page 17 Programme button "Water softening system" → Page 23 Special salt refill indicator "Rinse aid system"...
-
Page 17: Programmes
Programmes en Programmes Programmes You can find an overview of the pro- ted. The running time will change if Programmes grammes that can be selected here. the rinse aid system is switched off Different programmes, which can be or rinse aid needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 18: Information For Test Institutes
en Additional functions Programme Programme sequence Additional func- tions Tableware: Time-optimised: Extra Dry → "Additional ¡ Cleaning mixed table- ¡ Cleaning 65 °C Express 65° - 1h ware and cutlery. functions", ¡ Intermediate rinse Level of soiling: Page 18 ¡ Final rinse 69 °C ¡ Removing common ¡... -
Page 19: Features
Features en Top basket Additional func- tion Arrange cups and glasses in the top ¡ Switch on with small basket. loads. Half Load ¡ It is recommended adding less detergent to the detergent dis- penser than for a full machine load. ¡... -
Page 20: Bottom Basket
en Features Re-attach the basket to the upper rollers (setting 3) or lower rollers (setting 1). → "Basket heights", Page 22 Cutlery basket Arrange cutlery in the cutlery basket, always without sorting it and with the Check that the basket is level on sharp points downwards. both sides. -
Page 21: Folding Prongs
Features en Folding prongs Baking sheet spray head Use the folding prongs to position Use the baking sheet spray head to tableware securely, e.g. plates. clean large items of tableware, e.g. trays, grilles and plates. You can fold the prongs down to po- sition pans, bowls and glasses Arrange max. -
Page 22: Basket Heights
en Before using for the first time Insert the baking sheet spray head Removing baking sheet spray head in the holder and turn to the If you no longer require the baking right . sheet spray head, remove it from the appliance. -
Page 23: Water Softening System
Water softening system en Tip: You can change these settings Water softening system Water softening system and other "Basic settings" → Page 33 at any time. Hard water leaves limescale on the Water softening system tableware as well as the washing tank and parts of the appliance may become blocked. -
Page 24: Special Salt
en Water softening system Press repeatedly until the Note: Only use special salt for right water hardness has been set. dishwashers. Do not use salt tablets. The value H04 is set at the factory. Do not use table salt. To save the settings, press Add the special salt to the dis- for 3 seconds. -
Page 25: Regeneration Of The Water Softening System
Rinse aid system en erally only be used up to a water Additional power consumption in 0.05 hardness of 26 °E without adding special salt. The consumption values specified ¡ The water hardness is 0 - 8 °E. are laboratory measurements determ- You do not need to use special ined in accordance with the currently salt. -
Page 26: Setting The Amount Of Rinse Aid
en Detergent Add rinse aid up to the max mark. To save the settings, press for 3 seconds. Switching the rinse aid sys- tem off If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid compon- ent, you can switch the rinse aid sys- tem off. - Page 27 Detergent en Modern, powerful detergents mainly Tip: Suitable detergents are available use a low-alkaline formulation with online via our website or from "Cus- enzymes. Enzymes break down tomer Service" → Page 54. starch and remove protein. Oxygen- Separate detergents based bleaching agents are generally used to remove coloured marks, e.g.
-
Page 28: Unsuitable Detergents
en Detergent ¡ The function of rinse aid is limited Unsuitable detergents with combined detergents. You will Do not use detergent which could generally get better results using cause damage to the appliance or rinse aid. present a risk to health. ¡... -
Page 29: Tableware
Tableware en Close the lid of the detergent dis- Damage to glass and table- penser. ware Avoid damage to glass and table- ware. Cause Recommendation The following table- Only put tableware in ware is not dish- the dishwasher if it is washer-safe: marked as dish- ¡... -
Page 30: Arrange Tableware
en Tableware To save resources, do not pre- Cause Recommendation rinse tableware under running wa- The water temperat- Select a programme ter. ure of the programme with lower temperat- Observe the following when arran- is too high. ures. ging tableware: After the programme –... -
Page 31: Removing Tableware
Basic operation en Removing tableware Setting a programme To adjust the wash cycle to the soil- WARNING ing level of the tableware, select a Risk of injury! suitable programme. Hot tableware can cause burns to the Press the programme button re- skin. -
Page 32: Starting The Programme
en Basic operation few minutes and then close it. This Starting the programme will help prevent excess pressure Press building up in the appliance and stop ▶ a The programme has ended when the appliance door bursting open. the display shows "0h:00m". Press ... -
Page 33: Basic Settings
Basic settings en Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H00 - H07 Set the water softening system to your water hardness. -
Page 34: Changing Basic Settings
en Home Connect Basic setting Display text Selection Description Remote Start rc0 - rc2 Activate or deactivate → "Remote Start ", Page 35. The following settings are possible: ¡ With the setting "rc0", the func- tion is permanently deactivated. ¡ With the setting "rc1", the func- tion can be selected via the button. -
Page 35: Home Connect Quick Start
Home Connect en With the help of the Home Connect Tips ¡ Please consult the documents sup- App scan the QR code. plied by Home Connect. ¡ Please also follow the instructions in the Home Connect app. Note: Please note the safety precau- tions in this instruction manual and make sure that they are also ob- served when operating the appliance via the Home Connect app. -
Page 36: Remote Diagnostics
You can use this function to update Declaration of Conformity the software of your appliance, e.g. for optimisation, troubleshooting or Robert Bosch Hausgeräte GmbH safety-relevant updating. hereby declares that the appliance The Home Connect app informs you with Home Connect functionality about available software updates. -
Page 37: Cleaning And Servicing
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.bosch-home.com/ mend cleaning your appliance at reg- store or from customer service. ular intervals. Machine Care is a programme which... -
Page 38: Filter System
en Cleaning and servicing Phase Removal of Detergent Placement Food remnants and deposits Machine cleaner Detergent dispenser To ensure optimum cleaning perform- Remove any coarse soiling in the ance, the programme doses the de- interior with a damp cloth. tergents independently of each an- Clean the filters. - Page 39 Cleaning and servicing en Press the locking catches Cleaning filters gether and lift the coarse filter out Soiling in the dishwashing water may . block the filters. After each wash check the filters for residue. Turn the coarse filter anticlockwise and remove the filter system ...
-
Page 40: Cleaning Spray Arms
en Cleaning and servicing Cleaning spray arms Limescale and soiling in the dish- washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove . Pull up the lower spray arm to re- move. -
Page 41: Troubleshooting
Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 42 en Troubleshooting Fault Cause Troubleshooting E:32-00 will light up altern- Unscrew the water connection. ately or indicator for water Remove the filter from the supply supply lights up. hose Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
-
Page 43: Washing Results
Troubleshooting en Fault Cause Troubleshooting E:90-01 will light up altern- Mains voltage is too low. This is not a fault on the appliance. ately. Contact an electrician. Have the mains voltage and elec- trical installation checked by an electrician. A different error code ap- A technical fault is present. - Page 44 en Troubleshooting Fault Cause Troubleshooting Tableware is not dry. Water collects in recesses of Position tableware at an angle ▶ the tableware or cutlery. where possible. The combined detergent Use rinse aid to improve drying per- used has a poor drying per- formance.
- Page 45 Troubleshooting en Fault Cause Troubleshooting Remnants of food on table- Tableware is placed too Arrange tableware with sufficient ware. close together or basket is space in between. overfilled. The spray jets must reach the sur- faces of the tableware. Avoid points of contact. Spray arm rotation is Arrange tableware so that it does ▶...
- Page 46 en Troubleshooting Fault Cause Troubleshooting Detergent residue in the ap- Tabs are used in the quick Select a more intensive "Pro- ▶ gramme" → Page 17 or use pliance or short programme. Dissolv- "Powder detergent" → Page 26. ing time of the tab is not at- tained.
- Page 47 Troubleshooting en Fault Cause Troubleshooting Stubborn white coatings are Too little detergent is being Increase the amount of detergent ▶ present on tableware, inside used. used or change "Detergent " → Page 26. the appliance or the door. Washing programme selec- Select a more intensive washing ▶...
- Page 48 en Troubleshooting Fault Cause Troubleshooting Coloured deposits (yellow, The formation of films is due Check the setting of the water orange, brown) that are easy to ingredients of food rem- softening system. to remove are present inside nants and tap water (limes- Add special salt.
- Page 49 Troubleshooting en Fault Cause Troubleshooting Irreversible clouding of Glasses are not dishwasher- Use dishwasher-proof glasses. ▶ glassware. proof, only suitable for dish- Glasses are usually only suitable for washers. use in a dishwasher, i.e. long-term wear or long-term changes must be expected.
-
Page 50: Home Connect Problem
en Troubleshooting Home Connect problem Fault Cause Troubleshooting Connection to home net- WLAN on router is not act- Check the wireless network con- ▶ work is not established. ive. nection of your router. WLAN display is flashing. Connection to home net- Activate the wireless network con- ▶... -
Page 51: Mechanical Damage
Troubleshooting en Fault Cause Troubleshooting Water is left in the appliance Programme has not yet Wait until the programme ends or ▶ at the end of the pro- ended. cancel the programme with Reset. gramme. → "Terminate programme", ▶ Page 32 Appliance cannot be Software update is taking Wait until the software update has ▶... -
Page 52: Noise
en Troubleshooting Fault Cause Troubleshooting Appliance door cannot be Door cannot be closed due Check whether the appliance has ▶ closed. to installation method. been installed properly. When closed, the appliance door, its decor or attached parts should not knock against adjacent cabin- ets or the worktop. -
Page 53: Clean Wastewater Pump
Transportation, storage and disposal en Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 54: Protect Appliance From Frost
en Customer Service Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 55: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
Technical specifications en We will always find an appropriate Product number (E-Nr.), pro- solution and try to avoid unnecessary duction number (FD) and con- visits being made by a Customer Ser- secutive numbering (Z-Nr.) vice technician. With any warranty claims, we will You can find the product number (E- make sure that your appliance is re- Nr.), the production number (FD) and... -
Page 56: Information Regarding Free And Open Source Software
en Technical specifications request@bshg.com or to BSH Haus- Water pressure ¡ Min. 0.05 MPa geräte GmbH GmbH, Carl-Wery-Str. (0.5 bar) 34, D-81739 München, Germany. ¡ Max. 1 MPa The source code will be made avail- (10 bar) able to you on request. Inlet rate Min. 10 l/min To file a request, please email to oss- Water temperature Cold water. - Page 60 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.