Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beko WCB 78127
Summary of Contents for Beko WCB 78127
-
Page 5: Selecting A Program And Operating Your Machine
4 Selecting a Program and Operating Your Machine Control panel Figure 1 Spin Speed Adjustment button On / Off button Display Delayed Start buttons (+ / -) Temperature Adjustment button Auxiliary Function buttons Programme Selection knob Start / Pause / Cancel button Display symbols - Spin Speed indicator Figure 2... - Page 6 contain any stains or dirt. • Eco clean Use this programme, which is much more sensitive to environment and natural resources, to wash your lightly soiled and unstained cotton laundry (max. 3.5 kg) in a short time and economically. • Self Clean Use this programme regularly (once in every 1-2 months) to clean the drum and provide the required hygiene.
-
Page 7: Program Selection And Consumption Table
the rinse hold function in order to prevent your Program resumes. Your machine drains the clothes become wrinkled in an anhydrous water and spins your laundry. condition. With this function, your laundry is You can use no spin function in order to drain kept in the final rinsing water. -
Page 8: Auxiliary Functions
Auxiliary functions and amount of laundry, auxiliary functions selected, and changes in the supply voltage. Auxiliary Function Selection Buttons Select the required auxiliary functions Time delay before starting the program. With the “Time delay” function you can delay Some combinations cannot be selected the program start up to 24 hours. Setting can together. (Ex.: Pre-wash) (Figure 1-5a) and be made in intervals of 30 minutes. Quick Wash (Figure 1-5b). 1. Press “Time delaying” buttons “+” and “-” Auxiliary function selection to set your desired time delay. 2. Press “Start/Pause/Cancel” button. Then If an auxiliary function that should not be the time delay starts to count down. selected together with a previously selected function is chosen, the first selected function More laundry may be loaded or taken out during the time delay period. will be cancelled and the last auxiliary function Changing the delay time selection will remain active. If you want to change the time during the (Ex.: If you want to select pre-wash first and countdown: then quick wash, pre-wash will be cancelled 1. Press “Start/Pause/Cancel” button. -
Page 9: Childproof Lock
Switching the machine to standby 5 Maintenance and cleaning mode Detergent Drawer Press “Start/Pause/Cancel” button Remove any powder residue buildup in the momentarily to switch your machine to the drawer. To do this; standby mode. Auxiliary functions can be 1. Press the dotted point on the siphon in the cancelled or selected in accordance with softener compartment and pull towards the step the program is at. - Page 10 Draining any remaining water and hose. If the amount of water to be drained off is greater than the volume of the cleaning the pump filter container, replace the plug, pour the water Your product is equipped with a filter system out, then resume the draining process. which ensures a cleaner water discharge that • After draining process is completed, extends pump life by preventing solid items replace the plug into the end of the hose such as buttons, coins and fabric fibers from and fit the hose back into its place. clogging the pump propeller during discharge If your product is not supplied with an of the washing water. emergency drain hose, do the following as • If your machine fails to drain the water, shown in the figure below: the pump filter may be clogged. You may have to clean it every 2 years or whenever it is plugged. Water must be drained off to clean the pump filter. In addition, water may have to be drained off completely in the following cases: • before transporting the machine (e.g. when moving house) • when there is the danger of frost In order to clean the dirty filter and discharge • Place a large container in front of the filter the water;...
-
Page 11: Solution Suggestions For Problems
6 Solution suggestions for problems Cause Explanation / Suggestion Program cannot be started or selected. • Machine may have switched to self • Reset your machine by pressing “Start/ protection mode due to an infrastructure Pause/Cancel” button for 3 seconds. (see, problem (such as line voltage, water Canceling a Program) pressure, etc.). There is water coming from the bottom of the machine. • Be sure the seals of the water inlet hoses are securely fitted. • There might be problems with hoses or • Tightly attach the drain hose to the tap. the pump filter. • Make sure that the pump filter is completely closed. Machine stopped shortly after the program started. • Machine can stop temporarily due to low • It will resume operating when the voltage is voltage. back to the normal level. It continuously spins. Remaining time does not count down. (For models with a display) • The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum. -
Page 12: Specifications
7 Specifications Models WCB 78127 Maximum dry laundry capacity (kg) Height (cm) 59.7 Width (cm) 56.5 Depth (cm) Net Weight (±4kg) 230V ~ 50 Hz Electricity (V/Hz.) Total Current (A) 2200 Total Power (W) 1200 Spinning cycle (rpm max.) Specifications of this appliance may change without notice to improve the quality of the product.