hit counter script

Sound Pressure Level; All Models; Sound Power Level; Models 04052 And 04060 - Toro 04060 Operator's Manual

Hide thumbs Also See for 04060:
Table of Contents

Advertisement

Wearing safety shoes and long pants is advisable and
required by some local ordinances and insurance
regulations.
Handle gasoline carefully. Wipe up any spills.
Check the safety interlock switches daily for proper
operation. If a switch should fail, replace the switch
before operating the machine. After every two years,
replace all four interlock switches in the safety system,
regardless if they are working properly or not.
Using the machine demands attention. To prevent loss
of control:
– Do not drive close to sand traps, ditches, creeks, or
other hazards.
– Reduce speed when making sharp turns. Avoid
sudden stops and starts.
– When near or crossing roads, always yield the
right-of-way.
– Apply the service brakes when going downhill to
keep forward speed slow and to maintain control of
the machine.
The grass basket must be in place during operation of
the reels or thatchers for maximum safety. Shut the
engine off before emptying the baskets.
Do not touch the engine, muffler, or exhaust pipe while
the engine is running or soon after it has stopped
because these areas could be hot enough to cause burns.
Stay clear of the rotating screen at the side of the engine
to prevent direct contact with your body or clothing.
When a person or pet appears unexpectedly in or near
the mowing area, stop mowing. Careless operation,
combined with terrain angles, ricochets, or improperly
positioned guards can lead to thrown object injuries. Do
not resume mowing until the area is cleared.
Maintenance and Storage
Check all fuel lines for tightness and wear on a regular
basis. Tighten or repair them as needed.
If the engine must be running to perform a maintenance
adjustment, keep hands, feet, clothing, and any parts of
the body away from the cutting unit, attachments, and
any moving parts, especially the screen at the side of the
engine. Keep everyone away.
To ensure safety and accuracy, have an Authorized Toro
Distributor check the maximum engine speed with a
tachometer. Maximum governed engine speed should be
3600 RPM.
If major repairs are ever needed or if assistance is
desired, contact an Authorized Toro Distributor.
Use only Toro-approved attachments and replacement
parts. The warranty may be voided if used with
unapproved attachments.

Sound Pressure Level

All Models

This unit has an equivalent continuous A-weighted sound
pressure at the operator ear of: 84 dB(A), based on
measurements of identical machines per procedures
outlined in Directive 98/37/EC and amendments.

Sound Power Level

Models 04052 and 04060

This unit has a guaranteed sound power level of: 95 dBA/1
pW, based on measurements of identical machines per
Directive 2000/14/EC and amendments.
Sound Power Level

Model 04048

This unit has a guaranteed sound power level of:
96 dBA/1 pW, based on measurements of identical
machines per Directive 2000/14/EC and amendments.

Vibration Level

Models 04048 and 04052

This unit has a hand–arm vibration level of 7.00 m/s
on measurements of identical machines per ISO 5349
procedures.
Vibration Level

Model 04060

This unit has a hand–arm vibration level of 4.50 m/s
on measurements of identical machines per ISO 5349
procedures.
5
2,
based
2,
based

Advertisement

Table of Contents
loading

Table of Contents