Optional Boss S1 Card; Removing The M.2 Boss Riser; Installing The M.2 Boss Riser - Dell PowerEdge R450 Installation And Service Manual
Hide thumbs
Also See for PowerEdge R450:
- Reference manual (25 pages) ,
- Installation and service manual (121 pages) ,
- Installation and service manual (121 pages)
Table of Contents
Advertisement
Optional BOSS S1 card
Removing the M.2 BOSS riser
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
Steps
Hold the blue touch points, and lift the M.2 BOSS riser from the riser connector on the system board.
Figure 76. Removing the M.2 BOSS riser
Next steps
Replace the M.2 BOSS
riser.
Installing the M.2 BOSS riser
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Align the M.2 BOSS riser connector with the connectors on the system board and the guide on the M.2 BOSS riser with the
guiding slot on the system board.
2. Lower the M.2 BOSS riser into place until the M.2 BOSS riser connector is fully seated in the connector.
76
Installing and removing system components
Safety
instructions.
Before working inside your
Safety
instructions.
Before working inside your
system.
system.
Hide quick links:
Advertisement
Table of Contents
