Page 1
All Rights Reserved No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
Table of Contents What Is in Your Package ..........1 Getting to Know Your K3565 ........2 Preparation ............. 4 Installation/Removal Guide ........6 Safety Information ........... 9 Acronyms and Abbreviations ........14...
K3565, you can access the Internet through wireless network at a high speed. Note: This manual describes the appearance, installation and removal of the K3565. For the operation of the management program, refer to the User Manual. What Is in Your Package...
Getting to Know Your K3565 The following figure shows the appearance of the K3565. It is only for your reference. The actual product may differ. Œ USB Interface It connects the K3565 to a computer.
Page 5
(SIM/USIM) card. Ž Micro SD Card Slot It is where you insert the Micro Secure Digital Memory (SD) card • Indicator It indicates the status of the K3565. Colour Status Meaning Green Blinking (on for 100ms and The K3565 is powered on.
Preparation Requirements for the Computer To use the K3565, the computer should meet the following requirements: USB Type A Receptacle, Compatible with USB 2. 0 High Speed. Windows 2000 SP4, Windows XP SP2, Windows Vista. Your computer’s hardware system should meet or exceed the recommended system requirements for the installed version of OS.
Page 7
Inserting the Micro SD Card (Optional) Insert the micro SD card into the K3565, as shown in the following figure. Note: Do not remove the micro SD card when it is being used. Removing the card during an operation may damage the micro SD card as well as...
Otherwise, the K3565 cannot be installed as normal. Plug the K3565 into the USB interface of the laptop or desktop computer. You can connect the K3565 to a laptop or desktop computer using the USB cable for better signals.
Page 9
Starting the Management Program After the K3565 is installed, the management program is launched automatically. Then every time the K3565 is connected to the PC, the management program is launched automatically. You can also double-click the shortcut icon on the desktop to launch the management program.
Page 10
Removing the Management Program Click Start Menu. Click Control Panel. Click Add/Remove Program to remove the management program of the K3565. Note: Before removing the management program, exit the management program.
Safety Information Read the safety information carefully to ensure the correct and safe use of your wireless device. Interference Do not use your wireless device if using the device is prohibited or when it cause danger or interference with electric devices. Medical Device Do not use your wireless device and follow the rules and regulations set forth by the hospitals and health care facilities.
Page 12
Area where the air contains chemical substances and particles (such as granule, dust, or metal powder) Area indicated with the "Explosives" sign Area indicated with the "Power off bi-direction wireless equipment" sign Area where you are generally suggested to stop the engine of a vehicle Traffic Security Observe local laws and regulations while using the wireless device.
Page 13
WEEE Approval The wireless device is in compliance with the essential requirements and other relevant provisions of the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE Directive). RoHS Approval The wireless device is in compliance with the restriction of the use of certain hazardous substances in electrical and electronic equipment Directive 2002/95/EC (RoHS Directive).
Page 14
Do not leave your wireless device and accessories in a place with a considerably low or high temperature. Use only accessories of the wireless device approved by the manufacture. Contact the authorized service center for any abnormity of the wireless device or accessories.
Page 15
15.21 NOTICE: Changes or modifications made to this equipment not expressly approved by (HUAWEI) may void the FCC authorization to operate this equipment. 15.105 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
Page 17
Subscriber Identity Module UMTS Universal Mobile Telecommunications System Universal Serial Bus USIM UMTS Subscriber Identity Module WCDMA Wideband Code Division Multiple Access Version: V100R001_01 Part Number: 3101****...