18. ENVIRONMENTAL CONCERNS..............45 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
This appliance is intended to be used in household • and similar applications such as: staff kitchen areas in shops, offices and other – working environments; by clients in hotels, motels, bed & breakfast and – other residential type environments;...
Page 5
ENGLISH future they must be reattached to lock be replaced, this must be carried out the drum to prevent an internal by our Authorised Service Centre. damage. • Connect the mains plug to the mains • Always take care when moving the socket only at the end of the appliance as it is heavy.
• Do not wash fabrics which are heavily hinge and seals, other seals, door soiled with oil, grease or other greasy locking assembly, plastic peripherals substances. It can damage rubber such as detergent dispensers. Please parts of the washing machine.
ENGLISH • Thanks to the Soft Plus option, the the fabric fibres favouring a perfect fabric softener is uniformly spread out softness. in the laundry and deeply penetrates 3.2 Appliance overview 11 12 Worktop Drain hose Detergent dispenser Inlet hose connection Control panel Mains cable Door handle...
Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against mois‐ ture Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa)
Page 9
ENGLISH 5. Carefully put the appliance down on It is possible to see its rear side. water flowing from the 6. Put the front polystyrene packaging drain hose. This is due element on the floor under the to the testing with water appliance.
Page 10
Make sure that carpets do not stop the air circulation below the appliance. Make sure that the appliance does not touch the wall or other units. 2. Loosen or tighten the feet to adjust the level. WARNING! Do not put cardboard, wood 5.3 The inlet hose...
Page 11
ENGLISH CAUTION! Make sure that there are no leaks from the couplings. Do not use an extension hose if the inlet hose is too short. Contact the service centre for the replacement of the inlet hose. 2. On the edge of a sink - Fasten the guide to the water tap or to the wall.
6. ACCESSORIES 6.1 Available in Only appropriate www.aeg.com/shop or from accessories approved by authorised dealer AEG ensure the safety standards of the appliance. If Read carefully the instructions supplied unapproved parts are used, with the accessory. any claims will be...
If you install the appliance on a plinth under the washing machine. that is not an accessory supplied by Verify the compatible AEG, secure the appliance in the fixing stacking kit by checking the plates. depth of your appliances. Read carefully the instructions supplied with the accessory.
ENGLISH Washing phase indicator. It flashes during pre-wash and wash phase. Rinsing phase indicator. It flashes during rinse phase. When the Soft Plus option is activated, the indicator appears. Spinning and draining phase indicator. It flashes during spin and drain phase.
Page 16
Touch this button repeatedly until the If you touch the Start/Pause button, desired temperature value appears on the appliance performs the only the display. draining phase. When the display shows the indicators The appliance empties the water out , the appliance does not heat automatically after 18 the water.
Page 17
ENGLISH Pour the stain remover into • Turning the programme dial in another position. compartment . The stain remover will be added in the appropriate phase A small laundry load helps to of the washing programme. reach better results. This option is not available with a 8.7 Delay Start temperature lower than...
• In case of smaller load, touch this Follow the Pods manufacturer's dosage button twice to set an extra quick and storage recommendations. programme. Put maximum two tablets or single-dose The display shows the indicator detergents in the Pods® compartment in the detergent dispenser drawer.
Page 19
ENGLISH Programme Programme description Cotton, synthetics and mixed items. Special steam cycle without washing that can be used to prepare your dried laundry Steam for ironing or refreshing garments worn once . This pro‐ gramme reduces creases and odours and relaxes the fibres. When the programme is completed, quickly remove the laun‐...
Page 20
Programme Programme description White cotton items. This high-performance wash program combined with steam vapour, removes more than 99,99% of Anti-allergy bacteria and viruses keeping the temperature above 60°C throughout the washing phase; with an additional action on the fibers thanks to a vapour phase, an enhanced rinsing phase ensures a proper removal of detergent and micro-organism residues.
Page 21
ENGLISH Programme Default tempera‐ Reference spin speed Maximum ture Spin speed range load Temperature range 30 °C 1200 rpm 3 kg 40 °C - 30 °C 1200 rpm - 400 rpm 20 min.-3kg 30 °C 1200 rpm 2.5 kg 40 °C - Cold 1200 rpm - 400 rpm Outdoor 1 kg...
ENGLISH 9.2 Woolmark Wool Care - Blue The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool garments labelled as «hand wash» provided that the products are washed according to the instructions on the garment label and those issued by the manu‐...
This option increases slightly the programme duration. comes on/goes off above the indicator. To activate/deactivate this option touch button and the button 11. BEFORE FIRST USE 3. Pour 2 litres of water into the During installation or before...
Page 25
ENGLISH CAUTION! Washing heavily oiled, - Always follow the instructions that greasy stains could cause you find on the packaging of the detergent damage rubber parts of the products, but we recommend that you do washing machine. not exceed the maximum indicated level ).
Page 26
(when available) and an indicative programme duration. 2. To change the temperature and/or the spin speed, touch the related buttons. 3. If desired, set one or more options by touching the related buttons. The...
Page 27
ENGLISH In this case, for 30 seconds, it is possible 1. Touch the Start/Pause button to to pause the appliance and remove the pause the appliance. The related exceeding garments. indicator flashes. Once removed the exceeding garments, 2. Touch the Delay Start button touch the Start/Pause button to start...
Page 28
The anti-crease phase is running: If the temperature and level of the water in the drum are too high and/or the drum still rotates you cannot open the 12.9 Interrupting a door. programme and changing the options 1. Touch the Start/Pause button.
ENGLISH 5. Close the water tap. 4. Press the On/Off button a few seconds to deactivate the appliance. 12.13 Draining water out after In any case, the appliance end of cycle empties the water out automatically after If you have chosen a programme or an approximately 18 hours.
Page 30
• A very small load can cause balance problems with the spin phase leading to excessive vibration. If this occurs: a. interrupt the programme and open the door (refer to "Daily Use" chapter); b. manually redistribute the load so that the items are spaced evenly around the tub;...
ENGLISH Excessive detergent may cause: • Set the maximum possible spin • sudsing, speed for the selected washing • reduced washing effect, programme before drying your • inadequate rinsing, laundry in a tumble dryer. This will • a greater impact for the environment. save energy during drying! 13.4 Ecological hints 13.5 Water hardness...
Page 32
14.3 External cleaning available, run the Machine Clean programme. Clean the appliance with mild soap and warm water only. Fully dry all the 14.6 Door seal surfaces. This appliance is designed with a self Do not use a scouring pads or any cleaning draining system, allowing light scratching material.
Page 33
ENGLISH Always follow the instructions that you find on the packaging of the product. 2. Run a short cotton programme at high temperature with empty drum and with a small quantity of powder detergent or, if available, run the Machine Clean programme. 14.8 Cleaning the detergent dispenser 4.
Page 34
CLICK 7. Make sure that all detergent residue is removed from the conveyor. Use only soft damp clothes. 8. Put bottom cover back to its position 9. Reassembly the drawer as follows: by aligning its holes on drawer hooks a.
Page 35
ENGLISH • The appliance makes an unusual noise because of the blockage of the drain pump. • The display shows the alarm code WARNING! • Do not remove the filter while the appliance operates. • Do not clean the pump if the water in the appliance is hot.
Page 36
1. Remove the inlet hose from the tap and clean the filter. 11. Put the filter back into the special guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages.
ENGLISH 14.12 Frost precautions If the appliance is installed in an area where the temperature can reach the values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket.
Page 38
With some problems, the display shows an alarm code and the Start/Pause button may flash continuously: If the appliance is overloaded, remove some items from the drum and/or keep pressed the door while touching the Start/Pause button until the indicator stops flashing (see the picture below).
Page 39
ENGLISH • The programme was not finished properly or the appliance stopped too early. Switch the appliance off and on again. Internal fail. No com‐ • If the alarm code appears again, contact the Authorised Serv‐ munication between ice Centre. electronic elements of the appliance.
Page 40
Problem Possible solution • Make sure that a washing programme that ends with water in tub, has not been selected. • Make sure that the washing programme is finished. • Set the drain or the spin programme if there is water in the You cannot open the drum.
ENGLISH 2. Disconnect the mains plug from the CAUTION! mains socket. Risk of burns! Make sure 3. Open the filter flap. that the water temperature 4. Pull the emergency unlock trigger is not too high and the downward once. Pull it downward laundry is not hot.
Page 42
16.2 Legend Laundry load. h:mm Programme duration. Energy consumption. °C Temperature in the laundry. Litres Water consumption. Spin speed. Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture.
ENGLISH Programme Litres h:mm °C Cottons 1.60 3:50 1400 60°C Cottons 0.35 3:00 1400 20°C Synthetics 0.80 2:15 1200 40°C Delicates 0.40 1:05 1200 30°C Wool 0.30 1:05 1200 30°C 1) Reference indicator of the spin speed. 2) Suitable for washing heavily soiled textiles. 3) Suitable for washing lightly soiled cottons, synthetic and mixed fabrics.
Page 44
17.2 Cleaning the drain pump filter 180˚ Clean the filter regularly and, especially, if the alarm code appears on the display. 17.3 Programmes Programmes Load Product description White and coloured cottons. Normally soiled 9 kg garments. Eco 40-60 9 kg White cotton and coloured cotton.
ENGLISH Programmes Load Product description White cotton items. This program removes 9 kg more than 99,99% of bacteria and viruses . It Anti-allergy also ensure a proper reduction of allergens. 1) Washing programme. 2) Washing programme and waterproofing phase. 3) Tested for Staphylococcus aureus, Enterococcus faecium, Candida albicans, Pseudomonas aerugino‐ sa and MS2 Bacteriophage in external test performed by Swissatest Testmaterialien AG in 2021 (Test Report No.