Page 1
1. Material, printing and exterier size are refer to work tables. P/NO. 다 2. Printing, text size and line are based on LG design film. 3. Exterier size on the drawing is cutting line. 4. Before product controlled by criteria sample.
Page 2
OWNER’S MANUAL WASHING MACHINE Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference. T2735NTWV www.lg.com MFL69482502...
TABLE OF CONTENTS This manual is produced for a group of products and may contain images or content different from the purchased model. This manual is subject to revision by the manufacturer. IMPORTANT SAFETY INSTRUCTIONS ....03 Safety Messages .................03 Basic Safety Precautions..............03 READ ALL INSTRUCTIONS BEFORE USE ........05 GROUNDING REQUIREMENTS ............05 SAFETY INSTRUCTIONS FOR INSTALLATION ........05...
IMPORTANT SAFETY INSTRUCTIONS SAFETY MESSAGES For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death. Your safety and the safety of others is very important.
Page 5
has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas.
READ ALL INSTRUCTIONS BEFORE USE WARNING : For your safety, the information in this manual must be followed to minimize the risk of fire, explosion or electric shock, or to prevent property damage, injury to persons, or death. GROUNDING REQUIREMENTS This appliance must be grounded.
Page 7
electric shock from this appliance. • Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. Failure to follow this warning can cause serious injury, fire, electric shock, or death. • For personal safety, this appliance must be properly grounded. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
• The pedestal washer is for installation and use only underneath an LG manufactured front-loading washer. The pedestal washer is not designed to operate as a standalone unit, under an LG top-loading washer, under a dryer, or under a non-LG manufactured washer.
Page 9
• Disconnect this appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply. Failure to follow this warning can cause serious injury, fire, electric shock, or death. •...
Page 10
serious injury. SAVE THESE INSTRUCTIONS...
INSTALLATION Part names Washer Door Drum Dust Net Control Panel Drawer Water Supply Hose Power Plug Water Drain Hose Leveling Feet • Different accessories may apply depending on the model. Accesorios 1 water supply hose Water supply hose (for Water drain hose Water supply hose connector (for cold water) connecting to 2 washers)
• The pedestal washer must be stacked under an LG brand appliance in order to operate properly. Power outlet The power outlet must be within 1.5 m of either side of the washer. The appliance and outlet must be positioned...
Unpacking and removing shipping material • After removing the carton and shipping material, 132.9 cm lift the washer off the foam base. Make sure the plastic tub support comes off with the base and is not stuck to the bottom of the washer. 2.5 cm 2.5 cm 68.9 cm...
Tools you will need Short screws Top cover • Adjustable Pliers • Carpenter's Level • Screwdriver WARNING • The top cover must be installed to avoid the risk of electric shock or short circuit. Failure to do so can cause serious injury, fire, electric shock or death. •...
Leveling the washing machine Check again that the washing machine is level. • Push or rock the top edges of the washing The washer tub of your new washing machine spins machine gently to make sure that the washing at very high speeds. To minimize vibration, noise, and machine does not rock.
Using non-skid pads (optional) Connecting Inlet Hose If you install the washing machine on a slippery surface, • Water supply pressure must be between (1.0 ‒ 8.0 it may move because of excessive vibration. Incorrect kgf/cm leveling may cause malfunction through noise and •...
Page 17
Connecting one touch type hose to tap without NOTE thread • After connecting the inlet hose to the water tap, turn on the water tap to flush out foreign Unscrew the adapter ring plate and loose the four substances (dirt, sand, sawdust, etc.) in the water fixing screws.
Connecting Water Supply Hoses Connect the water supply hose connected to the washer you wish to install and the water supply to Two Washers hose connected to the water faucet to the water In case you need to install an additional washer, you supply hose connector.
Installing the Water Drain Hoses CAUTION • Incorrectly connecting the water drain or supply • You need to install the water drain hose on firm and hose may cause the following problems. flat ground by smoothly lowering it. The height of the –...
Connecting to the power supply WARNING • Do not use a worn or damaged power cord or • The washer should be plugged into a 220 VAC, 50 power plug. Replace or repair it immediately. Hz, 2-prong (grounded) outlet. Plug in the washer. •...
Opening the Washer Door Use Related Hold and pull the drawer handle forward • LG Electronics' washer models support the capacity completely. set forth in. Depending on the type or volume of laundry, the nominal capacity may differ from the Hold and lift the washer door handle upward to actual capacity.
Provide • Shoes, leather products, neck ties, suits, and electricity again or contact the LG service center. coats (in case of boiling washing, the washer door may • Laundry with artificial wrinkles not open after electricity is provided again due to •...
Page 23
Removing Alien Substances Metallic objects inside the washer can damage laundry, break the drum, and generate loud noises. Check each pocket of your laundry for coins, hairpins, or keys. Load the laundry up to this line • Before using the washer, shake off dust, soil, and sand from your laundry as they may dirty other clean clothes.
Using Detergents or Fabric NOTE • Stains on inner wear (cotton) or baby clothes are Softeners mostly fats or proteins. Instead of using a large Using Detergents amount of detergent, it is more effective to use a cycle that washes at high temperature such as •...
Page 25
Using Bleach NOTE • If the power is cut off forcibly while draining, • Mix bleach with water and add to the drum directly. ensure water has drained completely. Operating • Make sure to use oxygen bleach. the washer while water has not been drained completely may cause water to be drained and CAUTION supplied at the same time.
Control Panel Features POWER (ON/OFF) BUTTON START/PAUSE BUTTON • Press to turn the washer ON. Press again to • Press this button to start the selected cycle. If turn the washer OFF. Pressing the POWER the washer is running, use this button to pause button during a cycle will cancel that cycle and the cycle without losing the current settings.
Page 27
Washing Cycles Normal Cycle You can select a washing cycle optimized for your type Use this cycle for general washing. of laundry and its degree of soiling. Read the following NOTE descriptions and select the appropriate washing cycle. • If you press the Start/Pause button without •...
Page 28
Boil Wash Baby Wear cycle Select this boiling washing cycle to sterilize and whiten Select this cycle to wash your baby clothes hygienically. cotton inner wears or baby clothes. NOTE NOTE • Select a proper type of neutral detergent. • In this cycle, laundry is washed thoroughly due •...
Using the Optional Functions Tub Clean Use this option to keep the drum clean by sterilizing Child Lock Function germs within the drum. Use this option to prevent accidents caused by children NOTE manipulating the buttons while washing is in progress. •...
Maintanence If the hose is frozen • Pour hot water (not exceeding 50 °C) onto the water Winterizing the washer faucet and disconnect the water supply hose. • Turn off the water supply, disconnect the water supply • Soak the disconnected water supply hose in hot water hose, hold the water supply hose with the end part (not exceeding 50 °C) facing down, and drain water from the hose.
Page 31
Cleaning the Drum Cleaning the Water Supply Inlet Net Dilute drum cleaner (200 ml) or liquid chlorine When water is supplied to the drum weakly or the net bleach (200 ml) in water and pour the mixture in is clogged by waste, mark will appear on the the the drum.
Page 32
• Clean the dust net after using it 2 or 3 times. • If it is torn or damaged, purchase a new one from the LG Electronics service center. Separate the dust net from the drum by pressing the net separation button on both sides of the dust net.
• The communication performance will improve and Use this function if you need an accurate diagnosis you can receive better service if you use the home by an LG Electronics service centre when the product phone. malfunctions or fails. Use this function only to contact •...
Can the pedestal washer and the front-loading washer be run at the same time? Yes. The pedestal washer is designed to operate simultaneously under LG manufactured front- loading washers produced after 2009. It is not designed for operation under LG toploading washers, LG dryers, non-LG manufactured appliances, or as a standalone unit.
Page 35
NORMAL SOUNDS YOU MAY HEAR WATER SLOSHING SOUND: The following sounds may be heard while the washer A liquid in the balance ring around the wash basket helps the basket spin smoothly. is operating. They are normal. SOUND OF WATER BEING ADDED AFTER THE CLICKING: WASHER HAS ALREADY BEEN IN OPERATION Lid lock relay when the lid locks and unlocks.
Page 36
Problem Possible Cause Solutions Water leaking Inlet hose connection is • Check hoses and Y-connectors for leaks, cracks and loose at faucet, washer, or splits. Y-connector. • Check and tighten hose connections. House drain pipes are • The washer pumps out water very rapidly. Check for clogged.
Page 37
Problem Possible Cause Solutions Wash cycle time The washer automatically • This is normal. The washer adjusts cycle time is longer than adjusts the wash time for automatically to provide optimal results for the selected usual the amount of laundry, cycle.
Page 38
Problem Possible Cause Solutions Washer will not Control panel has powered • This is normal. Press the POWER button to turn the operate off due to inactivity. washer on. Washer is unplugged. • Make sure cord is plugged securely into a working outlet.
Page 39
Problem Possible Cause Solutions Washer not filling Filter clogged. • Make sure the inlet filters on the fill valves are not properly clogged. Refer to the filter cleaning instructions. Inlet hoses may be kinked. • Check that inlet hoses are not kinked or clogged. Energy efficiency.
Error codes Problem Possible Cause Solutions The display shows: Drawer is not closed properly • Close the drawer and press START/ PAUSE button to start the cycle. • If the drawer is closed and the drawer lock error message is displayed, call for service The display shows: Lid is not closed properly...
Page 41
The display shows: Control error. • Unplug the power cord and contact your nearest LG service center. The display shows: Water level is too high due to a • Close the water faucets, unplug the faulty water valve.
Page 42
It must be stacked under washer. a full-size LG appliance. Stacking switch is not working • The stacking switch will not operate properly. properly if the unit is stacked under a non-LG appliance, or an LG appliance manufactured before 2009.