Table of Contents
Advertisement
1. From the Library Ops menu, press the Down (↓) button to select Release
2. Press the Down button to select the magazine that you want to release, and
Park for shipping
To park the robotics for shipping, complete the following steps:
1. Remove all cartridges from the library.
2. From the Library Ops menu, press the Down (↓) button to select Park for
Find tape
To search for a tape according to its cartridge label, complete the following steps:
1. From the Ops menu, press the Down (↓) button to select Find tape, and press
2. Press the Up or Down button to cycle through the available characters. Note
3. Repeat step 2 until the cartridge that you want to select is displayed.
4. Press the Down button to select the cartridge that you are trying to find, and
5. Press Exit to return to the Ops menu.
Move tape
To move a tape cartridge, complete the following steps:
1. From the Ops menu, press the Down (↓) button to select Move tape, and press
2. Press the Down button to select a magazine, tape drive, or fixed slot group (if it
3. Press the Down button to select the tape cartridge that you want to move, and
4. Press the Down button to select the empty bin that you want to move the tape
5. Press the Exit button to return to the Ops menu.
Drive operations
To perform a drive operation, complete the following steps:
1. From the Ops menu, press the Down (↓) button to select Drive operations, and
2. Press the Down button to select the tape drive (if it is not already selected), and
20
Universal Tape Library User's Guide
magazines (if it is not already selected), and press the Enter button. A list of
magazines is displayed.
press the Enter button. The magazine is released and the door opens.
shipping, and press the Enter button. The robotics are parked, and the library
is turned off.
the Enter button.
that the wildcard character is a question mark (?). When the character that you
want to use is displayed, press the Enter button.
press the Enter button. The cartridge type and location are displayed.
the Enter button. The Move from menu is displayed.
is not already selected), and press the Enter button. The Move from menu
displays a list of storage bins.
press the Enter button. The Move to menu displays a list of magazines, tape
drives, and fixed slots.
to, and press the Enter button. The Move in progress screen is displayed.
When the move is completed, the Move done screen is displayed.
press the Enter button. The Drive operations menu is displayed.
press the Enter button. Information about the tape drive is displayed, and the
following drive options are available:
v Pwr off
v Pwr on
v Reset
Advertisement
Table of Contents
