Cabling Between Drive And Transformer; Drive With Integrated Transformer; Fig. 6-2 Drive With Integrated Transformer - ABB ACS5000 User Manual
Medium voltage ac drive air-cooled, 2 - 7 mva
Hide thumbs
Also See for ACS5000:
- User manual (186 pages) ,
- User manual (180 pages) ,
- User manual (186 pages)
Table of Contents
Advertisement
ABB
6.5
Cabling between drive and transformer
6.5.1
Drive with integrated transformer
5k A UM
1
1
Transformer
2
Terminal compartment
3
Drive
Fig. 6-2
Drive with integrated transformer
Cabling of a standard drive configuration includes the following
connections between the drive and the transformer:
■
Transformer secondary cables
■
Auxiliary power supply for the two transformer protection relays
■
Cable to the solenoid door lock in the transformer cabinet
■
Cable from the PT100 temperature sensor in the transformer cabinet
■
Three-phase power supply cable to each of the transformer fan units
■
Cable for several alarm and trip signals from transformer protection
relays, cooling fans, air filter and pressure monitoring
■
Heating cable from the drive control compartment to the transformer
cabinet (option)
■
FE busbars of transformer and drive cabinet
All cables are prepared for connection. Power cables are rolled up in the
transformer cabinet, control cables in the drive cabinet.
The cables can be identified by their specific number and are labeled with
the designation of the terminal where they are connected to.
For information on each individual connection, see
diagrams.
3BHS221906 ZAB E01 Rev. D
Chapter 6 - Electrical installation
2
3
Appendix D – Wiring
6-3 (22)
- Quick Links:
- Alarm / Fault Indications
Hide quick links:
Advertisement
Table of Contents
