hit counter script
Download
Share
Print this page
Husqvarna LF 160Dl Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Construction Equipment
  5. LF 160Dl
  6. Operator's manual
Husqvarna LF 160Dl Operator's Manual

Husqvarna LF 160Dl Operator's Manual

Plate compactor
Hide thumbs

Advertisement

Quick Links

Download this manual
LF 160Dl
EN
Operator's manual
2-20

Advertisement

loading

Related Manuals for Husqvarna LF 160Dl

Summary of Contents for Husqvarna LF 160Dl

  • Page 1 LF 160Dl Operator's manual 2-20...

  • Page 2: Table Of Contents

    Contents Introduction..............2 Maintenance..............11 Safety................4 Transportation, storage and disposal......17 Operation................ 8 Technical data.............. 19 Introduction Product description Intended use The product is a walk-behind forward plate compactor The product is for professional operation only. Use the with a combustion engine. The product is used for product for repairs and maintenance of driveways, paths compaction of thin to moderately thick layers of granular and parking lots.
  • Page 3 Product overview 1. Upper handle 14. Oil dipstick 2. Throttle control 15. Muffler 3. Starter rope handle 16. Lift handle 4. Oil drain plug for the engine oil 17. Vibration damping units 5. Type plate 18. Operator's manual 6. Eccentric element Symbols on the product 7.

  • Page 4: Safety

    Lifting point on the safety frame. Do not attach the lifting equipment at this point. (LF 160Dl) Safety Safety definitions CAUTION: Used if there is a risk of...
  • Page 5 General safety instructions • Use personal protective equipment. Refer to Personal protective equipment on page 6 . WARNING: • Make sure that only approved persons are in the Read the warning work area. instructions that follow before you use the •...
  • Page 6 Exhaust fumes safety • Numbness, loss of feeling, tingling, pricking, pain, burning, throbbing, stiffness, clumsiness, loss of strength, changes in skin color or WARNING: Read the warning condition. instructions that follow before you use the • Symptoms can increase in cold temperatures. Use product.
  • Page 7 • Do not breathe in the fuel fumes. The fuel fumes are poisonous and can cause injury. Make sure that the Husqvarna service agent. airflow is sufficient. Muffler • Do not remove the fuel tank cap or fill the fuel tank when the engine is on.

  • Page 8: Operation

    Safety instructions for maintenance • Examine the engine for leaks regularly. If there are leaks in the fuel system, do not start the engine until the leaks are repaired. WARNING: Read the warning • Do not use your fingers to examine the engine for instructions that follow before you use the leaks.
  • Page 9 To start the product Technical data on page the product. Refer to 19 for the correct fuel. 1. Set the throttle control to low speed. For more information about the fuel, refer to the engine manual supplied by the engine manufacturer. 1.
  • Page 10 4. Pull the decompression lever (A) up. Make sure that the decompression lever is in vertical position. 2. Carefully push the product forward. 5. Pull the starter rope quickly. CAUTION: 6. Release the starter rope handle to let the starter Do not push the product rope go back.

  • Page 11: Maintenance

    To stop the product • Push the stop lever until the engine stops. Maintenance Introduction Maintenance schedule * = General maintenance done by the operator. The WARNING: Read and understand the instructions are not given in this operator's manual. safety chapter before you do maintenance X = The instructions are given in this operator's manual.
  • Page 12 General product maintenance Before use, each After the first 20 Weekly, each After 6 months 10 h 100 h or, each 250 h Replace the recoil spring, thrust spring and tooth of recoil. Engine maintenance Before use, After the first Weekly, each After 6 months Yearly, each...
  • Page 13 • Remove grease and oil from the handle. WARNING: Engine oil is very hot To do a general inspection directly after the engine stops. Let the engine become cool before you drain the • Make sure that all nuts and screws on the product engine oil.
  • Page 14 To replace the oil filter 3. Fill with new oil for the eccentric element (B). Refer Technical data on page 19 . 1. Remove the cap (A). 4. Install the oil drain plug and tighten it. 5. Do a check of the oil level for the eccentric element. To drain the oil for the eccentric element 1.
  • Page 15 To do a check of the vibration damping 2. Remove the air filter (B). system 1. Loosen the 4 nuts and washers that hold the vibration damping units. 3. Clean the air filter housing with a brush. 4. Examine the air filter for damage. 5.
  • Page 16 3. Make sure that there are no cracks or deformation 3. Examine the V-belt for damages and wear. Replace on the 4 vibration damping units. the V-belt if it is necessary. 4. Examine the tension of the V-belt. 4. Replace the vibration damping units if they are damaged.

  • Page 17: Transportation, Storage And Disposal

    To replace the recoil spring, the thrust b) Move the engine rearward. spring and the teeth of the recoil 1. Remove the 4 screws (A). 2. Remove the starter assembly (B). c) Make sure that the V-belt pulleys align and 3.
  • Page 18 • When the product is no longer in use, send it to WARNING: Do not use metal a Husqvarna dealer or discard it at a recycling hooks, chains or other lifting equipment location. with rough edges that can cause damage to the lifting eye.

  • Page 19: Technical Data

    Technical data Technical data Weight, without water tank, kg/lb 160/352.7 Operation weight, kg/lb 162/385.8 Engine brand, type Greaves 1520, 4 stroke Engine power, kW/hp @rpm 3.2/4.4 @3000 Vibration frequency, Hz/rpm 85/5100 Amplitude, mm/in. 1.27/0.05 Centrifugal force, kN/lbf 25/5620 Operation speed, m/min or ft./min 20 or 65.6 Max.
  • Page 20 Product dimensions Length including handle, 1212/47.7 Handle height, mm/in. 1130/44.5 mm/in. Length bottom plate, 1114/43.8 Width 500/19.7 mm/in. Length bottom plate con- 0.22/2.39 Hight, mm/in. 738/29 nact area, m²/sq.ft 1742 - 002 - 04.02.2022...
  • Page 21 1742 - 002 - 04.02.2022...
  • Page 22 1742 - 002 - 04.02.2022...
  • Page 23 1742 - 002 - 04.02.2022...
  • Page 24 www.husqvarnacp.com Original instructions 1143009-26 2022-02-11...