Table of Contents
Advertisement
Installing on a Wall
(Only for **XS2B model)
For proper ventilation, allow a clearance of 100
mm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
100 mm
100 mm
100 mm
CAUTION
•
Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock.
•
If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall
mount and contact your local dealer or qualified personnel to assist with the installation.
•
Do not over tighten the screws as this may damage the monitor and void your warranty.
•
Use only screws and wall mounting brackets that meet the VESA standard. Any damage or injuries caused by
misuse or use of improper accessories are not covered by the warranty.
•
To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation
instructions. (This pertains only to Australia and New Zealand.)
NOTE
•
The wall mount kit includes the installation guide and all necessary parts.
•
The wall mounting bracket is optional. You can obtain additional accessories from your local dealer.
•
The length of screws required may differ depending on the wall mount. Be sure to use the correct length.
•
For more information, please refer to the guide provided with the wall mount.
To install your monitor on a wall, attach a wall
mounting bracket (optional part) to the back of the
monitor.
Make sure that the wall mounting bracket is
securely fixed to the monitor and to the wall.
1
Use only screws and wall mounting brackets
that conform to VESA standards.
2
Screws which are longer than standard length
may damage the inside of the monitor.
3
A non-VESA standard screw may damage
the product and cause the monitor to fall. LG
Electronics is not liable for any accidents related
to the use of non-standard screws.
4
Please use VESA standard as below.
100 mm
•
785 mm and above
100 mm
* Fixing screws: Diameter 8.0 mm x Pitch
* Fixing screws: Diameter 6.0 mm x Pitch
1.25 mm x Length 12 mm
(55XS2B)
1.0 mm x Length 12 mm
(49XS2B)
785 mm
11
Advertisement
Table of Contents
