Table of Contents
Advertisement
Available languages
Available languages
ADVANCED FUNCTIONS
14
Auto operation
(Artificial intelligence)
Cooling-only models
In this mode, the fan speed and the tempera-
ture adjust automatically, based on the room
temperature.
|
1
Press
to turn on the power.
f
2
Press
repeatedly to select auto opera-
tion.
E
F
3
Press
or
to select the desired op-
eration code if the temperature is higher or
lower than the desired temperature.
NOTE
!
• In this mode, you cannot adjust the fan
speed, but you can set the air deflector
to rotate automatically.
• This function may not be supported, de-
pending on the model.
Auto Changeover operation
This mode changes the operation mode auto-
matically to maintain the set temperature
at ±2°C.
|
1
Press
to turn on the power.
f
2
Press
repeatedly to select the auto
changeover operation.
C
-
is displayed on the display screen.
Code Description
2
Cool
1
Cool slightly
0
Maintain
room
temperature
-1
Heat slightly
-2
Heat
E
F
3
Press
or
to set the desired tem-
perature.
- The temperature range is 18°C - 30°C.
g
4
Press
repeatedly to select the fan
speed.
NOTE
!
This function may not be supported,
depending on the model.
Silent mode
It is to prevent potential claims by neighbors,
reducing noise from outdoor units.
The outdoor unit sound pressure in cooling
and heating mode is decreased by 3dB com-
pared to the rated sound pressure
|
1
Press
to turn the power on.
C
2
Press
.
I
-
is displayed on the display screen.
Silent Mode Function available under the
below temperature set
- Cooling-possible temperature range: Indoor
18°C (64°F) ~ 30°C (86°F), Outdoor 18°C
(64°F) ~ 43°C (109°F)
- Heating-possible temperature range: Indoor
16°C (60°F) ~ 30°C (86°F), Outdoor 6°C
(43°F) ~ 24°C (75°F)
NOTE
!
• Setting available only under operation-ON
Silent Mode and E/Control are not avail-
able at the same time. If E/Control is
pressed under Silent Mode, Silent Mode is
released and E/Control works.
• Capacity may decrease when outdoor
unit silent mode is selected.
• In Air Circulation, Humidity mode, this
function cannot be used.
Advertisement
Chapters
Table of Contents
