2000 metres above sea Additional information on products, accessories, replacement parts and services can be found at level. www.bosch-home.com and in the online shop This appliance may be used by children over www.bosch-eshop.com the age of 8 years old and by persons with...
Page 4
Important safety information (Important safety information Warning – Danger of suffocation! I m p o r t a n t s a f e t y i n f o r m a t i o n Packaging material is dangerous to children. Never allow children to play with packaging In any case, consult your responsible Master material.
Important safety information Causes of damage Warning – Risk of burns! The accessible parts become very hot when ■ Caution! in operation. Never touch hot parts. Keep Risk of damage due to corrosion. Always children at a safe distance. switch on the appliance while cooking to avoid Risk of burns! The appliance becomes hot during ■...
Environmental protection 7Environmental protection ÇOperating modes E xhaust air mode Y our new appliance is particularly energy-efficient. E n v i r o n m e n t a l p r o t e c t i o n O p e r a t i n g m o d e s Here you can find tips on how to save even more The air which is drawn in is cleaned...
Operating the appliance Note: Switch on the extractor hood when you start 1Operating the appliance cooking and switch it off again several minutes after you have finished cooking. This is the most effective way of removing the kitchen fumes. T hese instructions apply to several appliance variants. O p e r a t i n g t h e a p p l i a n c e It is possible that individual features are described which do not apply to your appliance.
Page 8
Operating the appliance Saturation display If the metal grease filters or the activated charcoal filter are/is saturated, the corresponding symbols flashes after the appliance is switched off: Metal grease filters: and 1 ■ Activated charcoal filter: and 2 ■ Metal grease filter and activated charcoal filter: ■...
Page 9
Operating the appliance Control panel model 2 Fan run-on time Symbol Explanation Fan on/off Switching on Fan settings Touch the symbol. Intensive mode 1 The fan will run at fan setting 1. Intensive mode 2 After approximately 10 minutes, the fan will switch itself off automatically.
Page 10
Cleaning and maintenance Lighting 2Cleaning and maintenance The lighting can be switched on and off independently of the fan. Warning – Risk of burns! C l e a n i n g a n d m a i n t e n a n c e Touch the symbol.
Cleaning and maintenance Cleaning the metal mesh grease filters Area Cleaning products These instructions apply to several appliance variants. It Stainless steel Hot soapy water: is possible that individual features are described which Clean with a dish cloth and then dry with a do not apply to your appliance.
Page 12
Trouble shooting Installing the metal mesh grease filter 3Trouble shooting Warning – Risk of injury! Components inside the appliance may have sharp M alfunctions often have simple explanations. Please T r o u b l e s h o o t i n g edges.
Page 13
Customer service Accessories 4Customer service (not included in the scope of delivery) W hen calling us, please give the product number (E Note: These instructions apply to several appliance C u s t o m e r s e r v i c e no.) and the production number (FD no.) so that we can models.
Installation instructions INSTALLATION INSTRUCTIONS I n s t a l l a t i o n i n s t r u c t i o n s (Important safety information R ead these instructions carefully. Only then I m p o r t a n t s a f e t y i n f o r m a t i o n will you be able to operate your appliance safely and correctly.
Important safety information Warning – Risk of death! Risk of poisoning from flue gases that are drawn back in. The exhaust air must not be conveyed into a functioning smoke or exhaust gas flue or into a shaft which is used to ventilate installation rooms that contain heating appliances.
Page 16
Important safety information Warning – Risk of electric shock! Components inside the appliance may have ■ sharp edges. These may damage the connecting cable. Do not kink or pinch the connecting cable during installation. Risk of electric shock! It must always be possible to disconnect ■...
General information Checking the wall KGeneral information The wall must be level, vertical and adequately load- ■ bearing. The depth of the bore holes must be the same ■ E xhaust air mode length as the screws. The wall plugs must have a G e n e r a l i n f o r m a t i o n secure grip.
Installation Installation 5Installation ¨ Screw on the fixing bracket for the flue duct. P reparing the installation I n s t a l l a t i o n Caution! Ensure that there are no electrical wires, gas pipes or water pipes in the area where holes are to be drilled.
Page 19
Installation Attaching and aligning the appliance Connecting the pipes First, remove the protective foil from the back of the Note: If using an aluminium pipe, smooth the appliance and, following installation, remove the foil connection area beforehand. completely. Exhaust-air pipe Ø 150 mm (recommended size) When attaching the appliance, ensure that it «...
Page 20
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom *9001358963* 9001358963 980615...