Leveling The Washer - LG WT7000C Series Owner's Manual

Hide thumbs Also See for WT7000C Series:

Owner's manual (160 pages)

Owner's manual (52 pages)

Owner's manual (106 pages)

Table Of Contents

Table of Contents

hose can result in flooding and property

damage.

NOTE

• The drain must be installed in accordance with

any applicable local codes and regulations.

• Make sure that the drain hose is not stretched,

pinched, crushed, or kinked.

• The end of the drain hose should be located a

minimum of 29.5 inches (75 cm) and a

maximum of 96 inches (244 cm) above the

bottom of the washer.

• For best results, locate the end of the drain hose

no higher than 66 inches (168 cm) above the

bottom of the washer. As the drain outlet is

raised beyond 66 inches (168 cm), the drain

function will be increasingly affected.

• Never create an airtight seal between the hose

and the drain with tape or other means. If no air

gap is present, water can be siphoned out of the

tub resulting in poor wash/rinse performance or

clothing damage.

Using a Standpipe to Drain

Insert the end of the drain hose into the

standpipe.

Use the provided tie strap

drain hose in place.

If the water valves and drain are built into the

wall, fasten the drain hose to one of the water

hoses with the provided tie strap

side on inside).

CAUTION

• Do not insert the end of the drain hose into the

standpipe more than 8 inches (20 cm). Doing so

can cause siphoning, odors, or improper

draining.

to secure the

(ribbed

NOTE

• If the drain is large enough for the flange on the

hose to fit inside, then do not insert the flange

more than 1 - 2 inches into the drain.

29.5 - 96 "

(75 - 244 cm)

Using a Laundry Tub to Drain

Hang the end of the drain hose over the side

of the laundry tub.

Use the provided tie strap to secure the drain

hose in place.