Page 3
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Page 4
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
CONTENTS 1 INSTRUCTIONS FOR SAFETY Upper basket height adjustable rack 23 Upper basket multipurpose service AND ENVIRONMENT rack ............23 General safety ........4 Intended use ..........4 5 OPERATING THE PRODUCT 24 Children’s safety ........5 Keys ............25 Disposing of packaging material ..5 Function keys ........
Instructions for safety and envIronment This section contains safety electric shock! instructions that will help to Never touch the plug with • give protection from risk of wet hands! Never unplug by personal injury or property pulling on the cable, always damage.
Instructions for safety and envIronment It must be used to do the Store all detergents and • • domestic type dishes only. additives in a safe place This appliance is intended away from the reach of the • to be used in household and children.
Instructions for safety and envIronment Compliance with WEEE collection points designated by the local authorities. Directive and Disposing of the Waste Product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation To make the product ready for use, Do not install the product at places • make sure that the electricity, tap water where temperature may fall below supply and water drainage systems are 0ºC. appropriate before calling the Authorised Place the product on a rigid floor.
Installation Connection to the drain Electrical connection Water discharge hose can directly be Before you insert the plug into the wall connected to the drain hole or sink’s socket make sure that the voltage and drainage. The length of this connection the frequency shown in the rating label must be min.
Installation Fitting a different plug Initial use As the colours of the wires in the mains Before starting to use the product, make lead of this appliance may not correspond sure that all preparations are made in with the coloured markings identifying the accordance with the instructions in terminals on your plug, proceed as follows: sections “Important safety instructions”...
Preparation Tips for energy saving Use the test strip supplied with the product according to the steps given below to Following information will help you use determine hardness level of your supply the product in an ecological and energy- water. efficient manner.
Page 15
Preparation 1 min. 1 Second 1 Minute Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
Preparation If the hardness level of the supply water is It is recommended to use above 90 °dF or if you are using well water, granule- or powder-formed then it is recommended to use water softening salts in the water purification devices and special filters.
Preparation 3. Add 1 litre of water to salt reservoir of Since different salt brands your machine only in initial use (C). in the market have different particle sizes and since the water hardness may vary, dissolution of the salt in water may take a couple of hours.
Preparation 3. Push the lid of the detergent dispenser Push the latch to right to open the to close it. A "click" will be heard when detergent dispenser lid (A). the lid is closed. 2. Put suggested amount of powder, liquid/gel or tablet detergent in the reservoir.
Preparation Rinse aid if the water hardness level is above the mentioned level. The rinse aid used in The best washing performance dishwashers is a special in dishwashers is obtained combination that aims to by using detergent, rinse increase drying efficiency and aid and water softening salt prevent water or lime stains individually.
Preparation Placing the dishes into the 4. If there are stains on tableware items after washing, level must be increased dishwasher and if there is a blue trace after wiping You can use your dishwasher in the them by hand, it must be decreased. optimum way with respect to energy This is set to position 3 as factory consumption and washing and drying...
Page 21
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware 19 / 43 EN Dishwasher / User’s Manual...
Preparation Adjusting the height of the Hold the upper basket wires with both hands, slightly lift up the basket and upper basket simultaneously push and release the The upper basket height adjustment latches shown in the figure (B). mechanism has been designed for you to 2.
Preparation Collapsible upper basket Cutlery basket wires Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an You can use collapsible wires when you efficient manner. need a larger space for your dishes in the Since the cutlery basket can be moved (A, upper basket of your machine.
Preparation Collapsible lower basket Bringing the tines to the horizontal position by holding tines them from the tips may cause There are foldable tines (A) located at them to bend. Therefore, it the lower basket of the machine are will be appropriate to bring the tines in the middle to horizontal designed for an easier placement of large or vertical position by holding...
Preparation Upper basket height Upper basket multipurpose adjustable rack service rack Use the lower and upper parts of the height This accessory located at the upper basket adjustable racks in the upper basket of of your machine allows you to easily wash the machine by sliding them down or up pieces such as extra long ladles and bread according to the heights of the glasses,...
Operating the product On/Off key 2. Programme Selection / Programme Cancel (3 seconds) key 3. Function keys Half Load Function Fast+ Function SteamGloss Function TrayWash Function 4. Programme indicator 5. Salt indicator Not in use 7. Start / Cancel indicator 8.
Operating the product Keys Programme selection On/Off key Press the On/Off button to turn on When you press On / Off key, indicator your machine. lights illuminate on the display for ON 2. Check the Salt and Rinse Aid indicators position.
Page 28
Operating the product /43 EN Dishwasher / User’s Manual...
Operating the product Auxiliary functions TrayWash Function Select Intensive 70°C programme and press Washing programmes of your dishwasher function key to run this function. are designed to obtain the best cleaning effect, considering the type of the soiling, Auto Tablet Feature soiling degree and properties of the dishes Auto Tablet is a feature which detects to be washed.
Operating the product the countdown 3, 2, 1 is completed on 3. Set the desired time by pressing the the display. Time Delay key. Time will increase with increments of 30 minutes up to 6 hours 2. Press P+ key to activate the L: option. and after that in 1 hour increments up to The interior lighting is turned off at 24 hours every time you press the key.
Operating the product Your machine performs water There might be residues of softening depending on the detergent or rinse aid in the hardness level of the supply machine and/or on the pieces water. Washing time can being washed depending on the change while the programme step the programme you have is running depending on the...
Operating the product Water cut-off warning No rinse aid dispensed in P:0 wash position. 1 dose of rinse aid is dispensed in P:1 If mains water is cut or water inlet tap position. is turned off the machine cannot take 2 doses of rinse aid are dispensed in P:2 water in and E:02 icon will flash on the position.
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left Lower impeller to remove the upper impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 37
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 38
Troubleshooting the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour.
Page 39
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 40
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.
The guarantee starts from the date of original purchase of the product for a • Repairs necessary as a direct or indirect period of twelve (12) months unless Beko result of: plc (the “Manufacturer”) agrees to extend Accidental damage, misuse or abuse of the guarantee for the product in writing.
Page 42
The product must be correctly chargeable basis only. installed, located and operated in accordance with the instructions Does Beko offer replacements? contained in the User Instructions This is a repair-only guarantee. On Booklet provided with your product. occasion, the Manufacturer may at its •...
Page 43
Guarantee We will not be liable for delays or if it is unable to carry out a repair because a convenient appointment cannot be arranged. Will there be any charge for the repairs? It is your responsibility to provide evidence to the Engineer that your product is covered by this guarantee with a proof of purchase.
Page 44
Should you experience any difficulty in obtaining service contact the Beko Customer Helpline on Tel: 0333 207 9710 or e-mail: CustomerService@support.beko.co.uk ………………………………………………………………………………………………........…………… This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Herts, WD18 8QU. Beko plc is registered in England and Wales with company registration number 02415578.