Table of Contents
Advertisement
8.5
8.5
Feeler gauge
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Radial clearances N and R
Radial clearances N and R
N and R
These are the theoretical values of the radial clearance between the com-
pressor wheel and the wall insert and / or turbine wheel and the gas outlet
flange.
The minimum and maximum values result from the manufacturing toler-
ances of the compressor wheel and turbine wheel or the wall insert and
gas outlet flange.
Operation Manual / TPS48-D/E.. - TPS61-D/E..
8
8.5
N1 and N2 as well as R1 and R2 are
each measured at the same time using
two feeler gauges.
To measure N1 and N2, the feeler gaug-
es must be pushed between the wall in-
sert and the compressor wheel free of
play, in each case above and below.
To measure R1 and R2, the feeler gaug-
es must be pushed between the gas out-
let flange and the turbine free of play, in
each case above and below.
Page 112
Advertisement
Table of Contents
