Table of Contents
Advertisement
2.6
2.6
WARNING
© Copyright 2016 ABB. All rights reserved.
Safety
Safe operation and maintenance
Safe operation and maintenance
The instructions specified in this section are for the safety of personnel.
Together with the instructions in the Hazards during operation and
maintenance section, they allow the user to safely use the turbocharger.
Work safety and work area safety
Risk of falling
There is the risk that someone can fall when working on the turbo-
charger.
Do not climb on the turbocharger or on parts attached to it or use
these as climbing aids.
When working at levels above the head, use climbing aids and work
platforms suitable for this purpose.
Observe all general regulations for the prevention of accidents.
Do not work on the turbocharger if you are under physical or mental
stress.
Work only with suitable tools as well as equipment and working mate-
rials that are in perfect condition.
Electric tools must be solidly earthed, and connecting cables may not
be damaged.
Keep the workplace clean, clear away loose objects and remove ob-
stacles on the floor.
Keep the floor, equipment and the turbocharger clean.
Have oil binding materials ready at hand and keep oil catch pans
ready or in position
Eliminate leaks.
Keep fire-protection materials and fire-extinguishing equipment ready.
Welding work in the vicinity of the turbocharger
When performing welding work in the vicinity of the turbocharger, al-
ways cover the filter silencer to prevent the filter mat from being dam-
aged.
Keep flammable objects and substances out of the range of flying
sparks.
Cover all connections on the turbocharger so that no foreign objects
can enter the turbocharger.
Wear personal protective equipment (PPE) for welding operations.
Operation Manual / TPS48-D/E.. - TPS61-D/E..
2
2.6
Page 22
Advertisement
Table of Contents
