Table of Contents
Advertisement
Chapter 8
Troubleshooting
Configure
Table 8-2
Troubleshooting Hints for Configure
Feature
Configure >
Templates
Configure > Jobs
78-14947-01
Symptom
The access point is
inaccessible
through the HTTP
port set through
template
configuration job.
Template
configuration job
fails every time.
The Undo function
does not work.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Probable Cause
The HTTP port setting
does not take effect until
the access point is cold
restarted.
The access point is not set
up properly.
Your job includes custom
values.
Your job includes routing
table configurations (only
for versions prior to
11.23T).
Your job for undoing a
user shows as successful
but the user is not
removed from the access
point.
Possible Solution
Cold restart the access point.
Make sure the WLSE is
configured as a TFTP server
for the access point.
For additional information,
see
Set Up Devices,
page
6-12.
None.
The Undo function only
works for new users that are
added to the access point.
If a user is being added in
place of an existing user on
the access point, the existing
user will remain after the
Undo job.
8-3
Advertisement
Table of Contents
Troubleshooting
