Table of Contents
Advertisement
Privilege Level 15 Commands
Usage Guidelines
Example
username
Syntax Description
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
B-74
To enable Telnet access to the system for all IP source addresses, use the
telnetenable enable command alone. To enable specific IP addresses, use the
telnetenable enable command followed by the IP addresses.
This command enables Telnet for all IP source addresses:
telnetenable enable
To create a new user account or change an account's properties, use the username
command. Use the no form of the command to remove a user account.
username name password password [privilege {0 | 15}]
no username name
name
Name of the user account to create or remove.
password
Specifies a password for the account.
password
The password for the account.
privilege
(Optional) Specifies the account privilege level.
0
Gives the account level 0 privileges. This is the default.
15
Gives the account level 15 privileges.
Appendix B
Command Reference
78-14947-01
Advertisement
Table of Contents
Troubleshooting
