Related Manuals for Siemens WM16Y899ES
Summary of Contents for Siemens WM16Y899ES
- Page 1 Washing machine WM16Y899ES, WM16Y80XES siemens-home.com/welcome Register your product online ens-home.com/welcome...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. - Page 4 Appliance settings ..35 Positioning and connecting . . 46 Included with the appliance ..46 Sensors ....35 Safety instructions .
-
Page 5: Intended Use
Intended use Intended use For private domestic use only. ■ I n t e n d e d u s e The washing machine is suitable for ■ washing machine-washable fabrics and hand-washable wool in detergent solution. To be operated with cold mains ■... -
Page 6: Safety Instructions
Safety instructions Reaching into the drum Safety instructions ■ when it is turning can cause injuries to hands. Electrical safety Do not reach into the drum S a f e t y i n s t r u c t i o n s when it is turning. -
Page 7: Safety For Children
Safety instructions Safety for children Warning Risk of poisoning! Warning Detergents and care products Danger of death! may be poisonous if If children play with the washing consumed. machine, they may get into life- Keep detergents and care threatening situations or injure products out of the reach of themselves. -
Page 8: Environmental Protection
Environmental protection Information on energy and water ■ Environmental consumption: ~ Page 12 The displays provide information protection about the relative level of energy and water consumption in the selected Packaging/used appliance programmes. E n v i r o n m e n t a l p r o t e c t i o n The more display segments are Dispose of packaging in an visible, the higher the respective... -
Page 9: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Plug into the mains. Open the washing Sort the laundry. To switch on, press Turn on the tap. machine door. -
Page 10: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e Service flap Detergent drawer with illuminated displays for the i-Dos dispenser on the drawer handle ~ Page 31... -
Page 11: Control Panel
Getting to know the appliance Control panel All the buttons are sensitive Buttons Childlock (w 3s.) for Note: (except for the main switch) and only activating/deactivating the need to be pressed lightly. childproof lock ~ Page 29 Buttons basic settings 3 sec. Main switch (ajuste base 3s.) for changing for switching the washing... -
Page 12: Display Panel
Getting to know the appliance Display panel Main menu after selecting the programme e.g. Easy-Care (sintéticos) The arrows on the display panel indicate in which direction the programme default settings can be changed using the buttons located above and below. To change, select the button under the programme highlighted in black and change the programme. - Page 13 Getting to know the appliance menu × button selected and select, for example, the Rinse Hold ($) option: Using the buttons under the two left- hand arrows, select the option. Using the two right-hand arrows, select the displayed value. The selected options are active immediately and are displayed on the display panel.
-
Page 14: Laundry
Laundry Some examples of soiling levels can Laundry be found on ~ Page 15 – Light: Do not prewash, select the P repare the laundry speedPerfect ( setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –... -
Page 15: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 16: Overview Of Programmes
Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry/Instructions Settings Name of the programme Max. load Brief explanation of the programme and for which fabrics it is Temperature that can be selected;... - Page 17 Overview of programmes Programme/Type of laundry/Instructions Settings 4 kg Mixed load of cottons and synthetic fabrics ¯ - 40 °C 0 - 1600** rpm ¦, (, !, l, Ã, æ, õ, $, ç Detergent è, fabric softener è Delicates / Silk (delicado / seda) 2 kg Delicate, washable fabrics, e.g.
- Page 18 Overview of programmes Programme/Type of laundry/Instructions Settings Dark wash (prendas oscuras / roupa escura) 3.5 kg Dark-coloured cottons and dark-coloured easy-care fabrics; ¯ - 40 °C Turn items inside-out before washing. 0 - 1200** rpm ¦, (, !, l, Ã, æ, õ, $, ç Detergent è, fabric softener è...
- Page 19 Overview of programmes Programme/Type of laundry/Instructions Settings Shirts / Business (camisas / business) Max. 2 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres or ¯ - 60 °C blended fabrics 0 - 800** rpm Notes ¦, (, !, l, Ã, æ, õ, $, ç Shirts/blouses are only given a short spin on the ■...
- Page 20 Overview of programmes Programme/Type of laundry/Instructions Settings Drum clean 0 kg Programme for cleaning and caring for the drum and the outer 80, 90 °C tub, e.g. before running the first wash cycle, if washing frequently 1200 rpm at a low temperature (40 °C or lower) or if an odour has developed after a prolonged period of non-use.
- Page 21 Overview of programmes Programme/Type of laundry/Instructions Settings Outd. / Impregnation (roupa escura) * Max. 1 kg Wash cycle followed by waterproofing of membrane-coated ¯ - 40 °C weatherproof and outdoor clothing or water-resistant fabrics 0 - 800** rpm Select a programme. ¦, (, l, Ã, $, ç...
-
Page 22: Starching
Programme default settings Programme/Type of laundry/Instructions Settings Auto. Intensiv (automático intensivo) * Max. 6 kg More intensive treatment of the laundry; 60 °C The degree of soiling and the type of fabric are automatically 1400** rpm detected and the washing sequence and intelligent dosing are $, ç... -
Page 23: Spin Speed
Programme default settings Spin speed After starting the programme, while the programme is running, you can add or remove laundry if necessary. ~ Page 29 Depending on what stage the programme is in, you can change the i-Dos settings spin speed (in rpm; revolutions per minute) before and during the programme. -
Page 24: Additional Programme Settings/Options (* Depending On The Model)
Additional programme settings/options ecoPerfect ¦ i-Dos i for fabric softener Dosage strengths Energy-optimised washing by reducing the temperature while achieving a High: high level of softness ª washing result that is consistent with the Medium: medium level of softness © selected programme, without the ecoPerfect ¦... -
Page 25: Water Plus
Additional programme settings/options Water Plus * Press the Ü button after approx. 10 minutes. The laundry remains in the soaking solution. Leave the laundry to soak for as long Settings that can be selected: as required, then either press the Ü on –... -
Page 26: Operating The Appliance
Press the # button. The appliance is settings for each washing cycle. switched on. To do this, repeatedly press the The Siemens logo appears on the corresponding button until the required display and all indicator lamps light up. setting is displayed. ~ Page 22 The Cottons programme set at the factory is then always displayed. -
Page 27: Select Additional Programme
Individual laundry Additional programme settings/options items may cause an unbalanced ~ Page 24 load. Wait until the Siemens logo no ■ Placing laundry into the drum longer appears before adding laundry. The load screen appears when the Warning ■... -
Page 28: Measure And Add Detergent And Care Products
Operating the appliance Measure and add detergent Some programme sequence steps explained: and care products Load adjust active ~ Page 35 ■ For the majority of programmes on your washing machine, detergent and fabric softener are dosed automatically; it is a factory setting for these programmes and can be changed. -
Page 29: Childlock
Operating the appliance Childlock Notes Do not leave the door open for too ■ (w 3s.) long when adding laundry as water from the laundry may leak out. You can lock the washing machine to For safety reasons, the door remains prevent the functions you have set from ■... -
Page 30: Programme End During Rinse Hold
Operating the appliance Programme end during rinse Notes Do not leave any items of laundry in hold ■ the drum. They may shrink in the next wash or discolour another item. The following appears on the display Remove any foreign objects from the panel: ■... -
Page 31: Intelligent Dosing System
Intelligent dosing system Initial use/filling the Intelligent dosing dispensers system Refer to the manufacturer's instructions Intelligent dosing system in when choosing your detergent and I n t e l l i g e n t d o s i n g s y s t e m fabric softener. -
Page 32: Everyday Use
Intelligent dosing system The display flashes if the fill level of ■ the selected intelligent dosing dispenser is below the minimum level. (De)selecting intelligent dosage and adjusting the dosage strength: The intelligent dosages for detergent Close the cover(s). and fabric softener are set at the factory Slowly push the detergent drawer in for programmes in which intelligent completely. -
Page 33: Base Dosage
Intelligent dosing system Base dosage Notes Reduce the basic dosage if using a ■ very concentrated detergent. The basic dosages are: If large amounts of foam are ■ For detergents – based on the repeatedly created during washing, ■ manufacturer’s recommendation for please check your basic dosage and average soiling and the respective dosage strength settings. -
Page 34: Manual Dosage
Intelligent dosing system Switching the dispenser content Notes ■ requires additional confirmation via When dosing all detergents, ■ the display panel. cleaning aids and cleaning agents, always follow the manufacturer's Changing the dispenser content: instructions. If dosing detergent manually, do not Appliance settings ~ Page 35 ■... -
Page 35: Appliance Settings
Appliance settings To change the settings, press and hold Appliance settings both basic settings 3 sec. buttons for approx. 3 seconds. ~ Page 13 You can change the following appliance A p p l i a n c e s e t t i n g s settings: Notes The settings are retained after the... -
Page 36: Load Sensor/Display
Cleaning and maintenance Load sensor/display surfaces and components in the machine. The load sensor detects the load level Do not use cleaning agents that contain in the washing machine when the door solvents. is open. This is indicated by the bar Prevent detergent residue from filling on the display panel. -
Page 37: I-Dos Detergent Draw And Its Housing
Cleaning and maintenance i-Dos detergent draw and its Cleaning the dispensers/detergent drawer: housing The detergent drawer can be removed completely to allow you to Emptying the dispensers: clean to dispensers after you have The dispensers have emptying emptied them. outlets with removable sealing plugs a) Empty the dispensers before at the front. -
Page 38: The Drain Pump Is Blocked, Emergency Draining
Cleaning and maintenance The drain pump is blocked, emergency draining Warning Risk of scalding! When you wash at high temperatures, the water gets very hot. If you come into – Protect the rear drawer connector contact with the hot water, you may be against water, detergent or fabric- scalded. -
Page 39: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Filter in the water supply blocked First, reduce the water pressure in the supply hose: Turn off the tap. Select any programme (except Rinse/Spin/Empty). Put the service flap back on, lock it Press the Ü button. Allow the into place and close it. -
Page 40: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. Emergency release F a u l t s a n d w h a t t o d o a b o u t t h e m . E.g. -
Page 41: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display Cause/remedy Re-fill the i-Dos iIô, The i-Dos dispensers are below the minimum fill level; top up ~ Page 31. ô dispenser i-Dos iIô, i-Dos ô set i-Dos iIô, i-Dos ô to off. error;... -
Page 42: Faults And What To Do About Them
Faults and what to do about them. Display Cause/remedy Drum care This instruction reminds you to carry out the Drum clean 90 °C programme or a 60 information: °C programme to clean and care for the drum and the outer tub. Notes Run the programme without laundry. - Page 43 Faults and what to do about them. Faults Cause/remedy Water is not visible in the Not a fault – the water is below the visible area. drum. The spin result is not Not a fault – the unbalanced load detection system has interrupted the spin ■...
-
Page 44: After-Sales Service
After-sales service Faults Cause/remedy In the "Reload" status, Ü The water level is too high. It is not possible to add laundry. Close the door ■ flashes very quickly and a immediately, if necessary. signal sounds. Press the Ü button to continue the programme. ■... -
Page 45: Consumption Rates
Consumption rates Consumption rates Energy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption* consumption*... -
Page 46: Efficiency Test Programmes For Cotton Fabrics
Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for Cottons in accordance with the (EU) directive no. 1015/2010 Programme + temperature + button Load Approximate programme... -
Page 47: Safety Instructions
Positioning and connecting Useful tools Spirit level for aligning ■ Spanner with: ■ – WAF13 for loosening the transport braces, and – WAF17 for aligning the appliance feet Safety instructions Warning Risk of injury! The washing machine is very heavy. ■... -
Page 48: Installation Surface
Positioning and connecting Installation surface Installing the appliance in a kitchenette The washing machine be stable Note: so that it does not move around. Warning The installation surface must be firm ■ Danger of death! and level. There is a risk of electric shock if you Soft floors/floor coverings are not ■... -
Page 49: Hose And Cable Lengths
Positioning and connecting Take the hoses out of the holders. Hose and cable lengths Left-hand connection ■ Unscrew and remove all four transport brace screws. Remove the sleeves. To do this, remove the mains cable from the holders. Right-hand connection ■... -
Page 50: Water Inlet
Positioning and connecting Water inlet When the tap is open, the water flow rate is at least 8 l/min. Warning If the water pressure is higher than this, Danger of death! a pressure-reducing valve must be There is a risk of electric shock if you installed. -
Page 51: Water Outlet
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin). -
Page 52: Levelling
Positioning and connecting Levelling Notes The mains voltage and voltage ■ Align the appliance using a spirit level. indicated on the washing machine (rating plate) are the same. Incorrect alignment may result in loud The connected load and fuse noises, vibrations and machine required are specified on the rating "movement". -
Page 53: Before Washing For The First Time
Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory. To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes The washing machine must be ■... -
Page 54: Transportation
Positioning and connecting Transportation Insert all four sleeves. Clip the mains cable securely in the E.g. when moving house holders. Insert and tighten the screws. Caution! Risk of damage to the appliance caused by detergent/fabric softener leaking from the dispensers. Leaking detergent/fabric softener can prevent the appliance from working correctly, e.g. -
Page 55: Aqua-Stop Warranty
Aqua-Stop warranty Aqua-Stop warranty Only for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a... - Page 56 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.com Manufactured by BSH Hausgeräte GmbH under Trademark License of Siemens AG *9001096955* 9001096955...